Used Beverage production for sale (935)

Condition: used, Year of construction: 2011, Overview This dual-lane automatic fishfilet-skinner, type: Maja DFS 4365/PA was built in 2011 in Germany. The dual-lane skinner DFS 4365 has been designed for fully automatic skinning of fish fillets on two independently controlled skinning systems. Offering more flexibility to fish processors as two skinning styles can be performed at the same time, the machine capacity is increased by 50 %.(approx. 1,5 tons of salmon fillets / h). There is one belt but two knifeholders. That means you can run both sides filets sperately. Two independently controlled skinning systems which can be configurated according to the processors demand. Downward pressure on the product is provided by adjustable air-filled rollers guaranteeing effective yet smooth handling of the fillets. Water spray device can be switched on if necessary for rinsing away scales from the tooth roller. Guide rails for perfect infeed position of the fillets High ingress protection Technical Details Cutting width 2 x 365 mm Width: 1383 mm Depth incl. Discharge belt: 1879 mm Height: 1208 mm Weight: 405 kg Electrical connection: 200-230 VAC, 380-460 VAC, 50 or 60 Hz Power consumption: 0,75 kW Fuse connection: 16 A Compressed air: 6 bar # 36l/min Scope of delivery Automatic dual-lane skinner for fish filets | Maja | DFS  4365/PA | 2011 Duslqouiclqewk Rcjt

Condition: used, Year of construction: 2006, Overview  The in-line palletizer was built in 2006 by the German company Beyer and can be converted to any customer-specific crate format. Technical details  Output: max. 200 cycles/h Set up for VdF crates, the machine produces 32 bottles per cycle, i.e. 32 x 200 = 6,400 bottles per hour With a beer crate, it would be four crates of 20 or 24 bottles/crate per cycle, i.e. 80 - 96 x 200 = 16,000 - 19,200 bottles/h Machine weight: approx. 3,000 kg Power connection: 400V, 3-phase, 50 Hz Connected load: 6.6 kW Air connection: 3/8" hose connection Height 3150 mm Width: 2400 mm Length: 2500 mm Height of box conveyor approx. 800 mm Pallet transport height approx. 400 mm Support feet D = 100 mm, M24 threaded spindles Stainless steel base frame Control system Siemens Simatic S7-300 Visualization Siemens OP7 SEW frequency inverter (Movidrive MDX61B) Control cabinet IP 55, according to VDE regulations Dslqwkeqxk Iue Rcsut

Condition: used, Year of construction: 2024, Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics efficiency Our Expertise Our services cover everything from pre-storage to post-storage operations. Prior to storing your machines, we take care of professional dismantling, documentation, transportation, unloading, and installation. Once in storage, we offer cleaning, maintenance, machine adaptation, spare parts exchange, and machine presentations based on project requirements. When it is time for stored machines to leave our facilities, we provide fullservice logistics to ensure a seamless transition, from taking them out of storage to transport and re-installation at new production sites. The facility located in Bippen, Germany offers the different features to best serve your needs: Open space, closed roof (open and closed sidewalls) and heated premises.    Get in touch with us:  Djlqwkeu Ax Abe Rceut

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Duslqwetq Dzhsk Rcot

Condition: used, Year of construction: 2020, Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently located at the owner's factory and is being sold because they are investing in another production line. Components: Filtering bottom Cutting blades Motor, gearbox with its speed variator Automated Guillotine valve for spent grain discharge Upper door Leg extensions CE certification and tank blueprints Duelqwotq Dzpek Rcst

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Duslqetrbrqewk Rcet

Condition: used, Year of construction: 2006, Overview  The new glass pusher “SWEEP-OFF B” was built by Sidel/ Simonazzi in 2006. It is still in operation and can be inspected in person at any time. The machine has only a few operating hours.   Technical details  Capacity: 48,000 bph on 0.5l bottle  Maximum pallet height: 2,000 mm  Pallet dimensions: 1,000 mm x 1,200 mm  Scope of delivery    Incl. protective fencing according to layout  Incl. pallet transport  Incl. empty pallet magazine  Incl. magazine for slip-on lids, intermediate layers  Incl. push-off table  Incl. technical documentation   Incl. program backup  Dslqwsugyczsk Rceut

Condition: used, Year of construction: 2015, Overview  The steam generator was built in 2015 by the American manufacturer Clayton. The machine was recently dismantled by a specialist company. Technical specifications  Net output: 589 kW Equivalent steam production max.: 790 kg/h  Water content in operation: 130 liters  Regulated gas pressure minimum: 25 mbarG Maximum gas pressure: 200 mbarG Consumption at full load: 62.9 Nm³/ h  Burner regulation (2-stage): 0-50-100 %  Steam quality: > 99.5  Combustion efficiency (100% stage): 92%  Combustion efficiency (50% stage): 94  Generator dimensions (LxWxH): 2,030 x 1,300 x 1,835/ 2,200 mm  Dry weight: 1,215/ 1,285 kg  Pump dimensions (LxWxH): 1,350 x 680 x 1,025 mm Weight of water pump: 325 kg  Installed electrical power: 4kW Accessories  Back pressure regulator DN40  Vertical atmospheric deaerator + chemical dosing pump  Water softener  Chemical tank 60L + alarm + drip tray  Pump for topping up  Bursting pipe + cooling of the rinses Duelqwker Apn Se Rcst

Condition: used, Year of construction: 2002, Overview This automatic heat sealer for preformed containers is manufactured by INAVEN MASCHINEN AG (VC999), Model TS1200 N. Specially designed for packaging in vacuum heat-sealing format and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transportation. It automatically performs the MAP cycle, thermosealing and gas injection, perfect cutting of the film and automatic collection of the film. Technical details Length: 4400 mm Width: 870 mm Height: 1790 mm input belt 2700 mm output belt 1120 mm  power 6 kW; power supply 400 V, 50 Hz Scope of delivery tray sealer | VC 999 | TS 1200 | 2002 Duslqwkstzg H Rs Rcot

Condition: used, Year of construction: 2012, Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmospheric monoblock bottling and capping machine for 33 cl bottles with filling capacity of 1,200 containers/hour. 2 compressors necessary for the operation of the bottling machine. 1 manual 6-spout filler for emergencies and special bottles. Semi-automatic adhesive labeler. 1 compressor necessary for the labeler. Ribbon printer for adding variables to the labels, with rewinder. 1 pallet truck. 6m x 2.50m x 3m high refrigeration chamber. Industrial scale. Including all sandwich panels from which the production rooms are made Duelqwk Rsuzpipecjt

Condition: used, Year of construction: 2007, Overview These two Velcorin dosing systems (models VDT 50 L and II G B5 MID 50 C with touch panel) were developed by Lanxess for beverage preparation. The systems have a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. Both systems have already been dismantled and are ready for collection. However, one of the systems can only be used as a spare parts dispenser. Technical details  Capacity (beverage volume): 85 - 504 hl/h Power supply: 230 V, 50-60 Hz Power consumption: Maximum 2000 VA Condition: One unit intended for use as a spare parts dispenser, one in ready-to-use condition Availability: Ready for immediate collection Inspection: Possible on request Scope of delivery   VDT 50 L + Touch Panel | Screen defective II G B5 MID 50 C + Touch Panel | Last maintenance: 11/2022 Dusleu Hux Teqwk Rcjt

Condition: used, Year of construction: 2002, Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment Delqweu Huydjk Rcjut

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Dueljvl Huasqwk Rcjt

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Dolqwsu Tyzqok Rcjut

Condition: used, Year of construction: 2023, Overview  The Hiwell AMF 600-V Automatic Food Forming Machineis used for forming and portioning of different products by a moulding plate system. Servo feeding system  Feed screw adopts servo control system to prevent crushing materials and deliver higher reliability. Servo mold plate drive system  With high repeated positioning accuracy, servo operated mold plate drive system ensures high reliability at a fresh of 100 strokes/min. The food forming machine is equipped with fewer wearing parts to reduce your usage and maintenance cost. Stainless forming platform The forming platform is made by stainless steel plate. With high precision of processing and positioning, the forming platform ensures the stable and high-speed running of mold plate system. Hydraulic fast filling system  Imported hydraulic filling system and high-precision filling cavity can rapidly fill the mold plates with no material leakage. Touchscreen control The touchscreen control system features new operation interface, multiple languages input, easy parameter setting, auto data storage, auto fault diagnosis, EtherCAT bus control and high-speed data communication. Good compatibility with metal mold plates  Metal mold plates have excellent wear resistance, long service life and less material leakage. The food forming equipment is able to process a wide range of products including meat, fish, potatoes and vegetables as well as bakery. High productivity and operationality  Fuzzy design software can automatically match the forming speed with conveyor output speed, ensuring the consistency of products in whether small or high volume food forming process. Technical Details  Belt width    600mm Air/water pressure    6Bar/2Bar Power    28.12kW Production capacity    800-1600kg/h Speed    50-100 strokes/min Product thickness    6-40mm Product weight error    ≤1% Max. diameter of product    150mm (for burger) Filling pressure    3-15Mpa adjustable Overall dimension    3170x1176x2430mm Scope of delivery Forming machine | AMF 600-V | HIWELL | 2023 Column loader |  HIWELL | 2023 Dslqwkeu Tyzwo Rcjut

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER Dolqevtpc Ajwk Rcjut

Condition: used, Year of construction: 2000, Overview This vacuum filler, type: Vemag Robby 1 was built 2000 in Germany. Vacuum filling machine for filling, portioning, linking with pc control. Technical Details Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg Scope of delivery Vacuum filler | VEMAG | Robby 1 | 2000 Dolqwevtqqzek Rcjut

Condition: used, Year of construction: 2005, Overview This transport conveyor, type: Singer -Special was built in 2005. Technical Details belt width: 300 mm, total dimensions: approx: 5000 mm x 500 mm. Height start: approx: 200 mm Height end: approx: 900 mm Scope of delivery conveyor | Singer | Spezial | 2005 Dslqwk Revt S Uuoceut

Condition: used, Year of construction: 2008, Overview This grape de-stemming and crushing machine type BETA160R was manufactured by VEMA/ITALCOM. With a capacity of 16 tons per hour, it is ideal for processing large quantities of grapes (especially green grapes). The machine has already been dismantled and stored and can be inspected on request. Technical details  Capacity: 16 tons/hour Power supply: 200V Rated power: 3.3 kW Weight: 320 kg Duelqwk Rou Emgmscst

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Duelemfqm Doqwk Rcst

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Dslqwk Rsmk I Dwecsut

Condition: used, Year of construction: 2006, Overview  The filler and capper block was built in 2006 by the German manufacturer Filltec.  Techn. details  Number of filler places: 32 Number of capping stations: 8  Magnetic cap elevator for crown corks Mains voltage: 400 V   Frequency: 50 Hz  Auxiliary voltage: 24 Volt DC  Electr. protection class: IP 54 Duelqjm U R Daowk Rcot

Condition: used, Year of construction: 2021, Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket Dujljl Hxn Rjqwk Rcet

Condition: used, Year of construction: 2018, Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Djlqol Hx Dbjwk Rcjut

Condition: used, Year of construction: 1998, Overview The bottling line is located at a German winery and is no longer in operation. It is available because the seller has purchased a larger plant. Bottled were 1l Schlegel bottles with MCA closure.  Plant in detail  Bottle cleaning  Manufacturer: SeitzEnzingerNoll Year of construction: 1988 Type: TAUCH + STELLA  Drying tunnel Manufacturer: SeitzEnzingerNoll Year of construction: 1987  Type: REGA1  Filler  Manufacturer: Sen compacta-h 12 bottle cells Few operating hours  Screw capper  Manufacturer: Adelski  Year of construction: 1998 Type: PP2001 S MCA capper Labeler Manufacturer: MAG  Year of construction: 2000  Sorting table  Transport Duslqwk Rjl Hx H Njcet