Used Beverage production for sale (935)

Condition: used, Year of construction: 2019, Overview  The inspector “Linos S2” was manufactured in 2019 by the German manufacturer Loell. The machine was regularly maintained by OEM and is still in operation. As the brewery is stopping the production on this line, they are no longer in need of this machine. Tech. Details Running direction: left-right Detections: Bottom inspection camera Sealing surface inspection camera Sidewall inspection camera Residual liquid and residual caustic detection Thread inspection Formats: 0,33 l Longneck (brown/green/white) 0,5l NRW (brown with crown cork) 0,5l NRW (white with thread) 0,5l Euro (brown) 0,33l Euro (brown) 0,33l Vichy (brown) 0,33l Gourmet Scope of delivery  Ejector after machine Dslq Nbkevlxfqs Asut

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Duolsnpbhvoq Nbk Aot

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Dolem D Ukmoq Nbk Ajut

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 Dolq Nbsl Hxlysk Asut

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Duslq Nbsl Hxmhok Ast

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Dolq Nbkel Hxpkj Ajut

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Duslq Nbol Hxprsk Aet

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Dujlq Nbkel Hx Ene Ast

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Duolq Nsl Hx E Sjbk Aet

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Dolqsl Hx Rde Nbk Ajut

Condition: used, Year of construction: 2019, Overview   The machine was manufactured in 2019 by the American manufacturer CODI. Most recently, it was used to can flavored and carbonated mineral water. The machine has already been disassembled.  Techn. details  Capacity: 3.000 cans/ h  Formats  0.33 l standard  0,44 l Standard 0,33l Sleek  Volume of the filling tank: 64,2 l Voltage: 400-500 VAC  Frequency: 50-60 Hz Load current: 13 A  Duelopzk Ahoq Nbk Aet

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Delq Nbeqqz Txok Aout

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Duelq Norkgy Usbk Aot

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000 Dolq Nbery Iiwsk Ajut

Condition: used, Year of construction: 2012, Overview  The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h  Longitudinal run  Previously used formats: 12x 1L PET bottles  Inspection via camera  Including pre-belt and line distributor 230V/ 50Hz  Duoleqc E I Rjq Nbk Aet

Condition: used, Year of construction: 2012, Overview  The METE Double Line carry handle applicator was built by TwinPack in 2012 and is used to attach self-adhesive handles made of transparent tape and cardboard labels to packaging bundles of various products. Technical details Maximum speed: 140 packs/minute (70+70), depending on the configuration Packaging sizes processed: Maximum height: 400 mm Maximum width: 400 mm Compressed air consumption: 2.8 Nl/package (normal) 4.2 Nl/package (with bow handle unit) Electrical power: 5 kW Djlq Nbevmd Utsk Ajut

Condition: used, Year of construction: 2002, Overview This universal smoke house, type: Bastra 1500 C was built in 2002 in Germany. Functions: reddening, drying, ripening, smoking, cooking, scalding, roasting, moistening, According to previous owners the machine was regularly serviced by Bastra customer service and was in operation until recently. Technical Details Electric heating (24 kW heating output) Width: 138 cm Height: approx. 255 cm Depth: 104 cm 1 trolley 100 x 85 x 168 cm (stock length 90 or 100 cm) Smoke generator: BASTRASMOKE (saw dust) Scope of delivery Smoke house| Bastra | Bastramat 1500 C| 2002 Duelq Njvndpysbk Ast

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  Cold Water Tank | 2.500L   5x Isobaric Fermentation tanks | INOX | 2.500L | 2020  3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 2014  Brite tank | INDUSTRIAS CESPEDES | 2017   Automatic, isobaric filler for glass | INOX | EMBONOX-6A | 2020  Carton labelling machine   Cooling equipment  Grinding mill  Water tank | 1.000L   Compressor   2x Helicoidal pump   Volumetric pump Djlqety Ddrs Nbk Asut

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Delstt Um Ajq Nbk Ajut

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Dslq Nouca Amsbk Asut

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Duelq Neuch Tgjbk Ast

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Dolqouch Tms Nbk Ajut

Condition: used, Year of construction: 1998, Overview This grinder, type: K&G WW 200-MM was built in 1998 in Germany. This machine is in good condition. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Power 50 kW Efficiency approx. 12000 kg/h (depends on the hole plate) Height 178 cm Width 165cm Length 105cm Weight 2000 kg Scope of delivery Grinder | K&G | WW 200-MM | 1998 Duoleumpr Tsq Nbk Ajt

Condition: used, Year of construction: 2004, Overview This linear oven, type: STORK THS 630/6000 was built in 2004. The unit is allready dismantled and on stock. The linear oven has two heating areas available that can be tempered differently at the same time. That’ll bring you maximum efficiency in food processing with minimized energy consumption. Technical Details electrically heated heating separately adjustable in two areas adjustable speed belt width ± 630 mm net cooking length : ± 6.000 mm overall dimensions (l x w x h) : ± 8.500 x 1.700 x 3.600 mm with belt wash system suitable for CIP-cleaning canopy with electric hoists suitable for steam injection (heating + product yield) Scope of delivery Linear oven | Stork/ Marel |THS 630/6000| 2004 Dslqsumzn Hs Nbk Aeut

Condition: used, Year of construction: 2009, Overview  This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details  Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter  Djleu Rwdyjq Nbk Aeut