Used Automatic drilling machines for sale (33)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: N/A, feed length Z-axis: 200 mm, drilling capacity: 16 mm, type of input current: AC, control cabinet height: 1,800 mm, overall weight: 300 kg, spindle speed (max.): 1,000 rpm, power of the servo motor: 3,000 W, Its a multihaed special drilling machine Cgeliowdbh Rjnfq Rst

Condition: repair required (used), Functionality: not functional, used drilling rig , consisting of : Cslinfqswduw Eo Regt - drilling machine MAXION , 50 mm , infinitely variable speed adjustment - hydraulic feed device , without hydraulic unit - 2-spindle drill head BOHRMASTER , max. 32 mm drilling capacity - Pneumatic clamping device - Sliding table with spray plates , table 1200 x 600 mm, adjustment range 600 mm - Coolant device - Separately standing : Electric cabinet . For setting up : - Feed device without hydraulic unit - Electrical system (without wiring diagram) .

Condition: good (used), Year of construction: 1984, A Heckler & Koch BA20 CNC-controlled automatic drilling machine from 1984 is for sale. Working range x-axis 650 mm, y-axis 350 mm and z-axis 200 mm Work table with two clamping surfaces each 750 x 420 mm, drive spindle speed range 50-6000 min-1, tool holder steep taper SK30 system HK, drive power DC motor 10.5 kW, torque approx. 40 Nm, tapping M16, feeds infinitely variable 10-8000 mm / min., inputs y and x axis 12 m / min., z axis 8 m / min, Capacity 2 x 12 tools, max. tool diameter 50 mm, max. tool length 320 mm, coolant system can be switched on and off automatically via program, delivery rate 75 l / min., operating voltage 3 x 380 V 50 Hz, control voltage 220V 50 Hz, total connected load 15 kW, fuse protection for the entire system 30A. Large tool kit and plenty of accessories. Machine can be tested under power in advance. Loading possible on collection via overhead crane. Cjlinfqstzakwo Rogt

Condition: excellent (used), Year of construction: 1986, bore diameter 65 mm throat 380 mm Control PLC-Steuerung bore spindle turning speed range 63 - 1600 U/min table-size 630 x 500 mm rapid traverse Z-axis 4,75 m/min boring feeds: 0,05 - 0,56 mm/U total power requirement 9 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Celeucgqqsinfq Rjgt Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed manually via gear shift. Pole-changing motor with 1,500/3,000 rpm. with mechanical overload clutch

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Cgeliegbdpkonfq Ret Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: used, Year of construction: 2001, bore capacity in steel (diameter) 32 mm throat 322 mm bore stroke 180 mm table-size 500 x 370 mm Cgeliju Rt Iujnfq Rjt spindle taper MT 4 number of spindle speeds 55- 5000 UpM Control Software Spezial total power requirement 3 kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1 x 1 x 2,35 m column type drilling machine with additional turret head ARBO 20. Machine comes with spare parts.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs Cgjlieu Id Ruenfq Ret opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: like new (used), Year of construction: 2015, Ficep Orient 1202DD Drilling machine Automatic CNC single - spindle drilling lines This machine has been completely cleaned and checked Cgoljv Iazfoinfq Rot Section size [min. mm] 80 x 10 Section size [max. mm]1220 x 610 Drilling heads [no.] 1 (2) Drilling tools per head [no.] 6 (12) Drilling diameter [max mm] 40 Spindle power [kW] 31 Spindle speed [max.RPM] 5000 Machine weight [kg] 6000 Input and output of the brand Kaltenbach. Input: 20M Output: 20M For more information, please contact us

Condition: good (used), Max. drilling capacity ∅20 mm/ 600 N/mm2 Total stroke 125 mm Working stroke, continuously adjustable 125 mm Feed force at 6 bar 4130 N Max. transferable. Torque 80 Nm Speed range at 50 Hz 360–5800 min-1 Speed range at 60 Hz 432–6960 min-1 Max. permissible speed 8000 min-1 Feed rate 30–2400 mm/min Air consumption 0.45 l/cm stroke Concentricity 0.01 mm Tool holder – standard ISO 30 / HSK 50 Celinsvxryhofq Rogt Inductive limit switch 24 V Normal voltage 230/460 V Motor speed at 50 Hz 2900/1450/970 min-1 Motor speed at 60 Hz 3480/1740/1160 min-1 Motor power at 50 Hz 1.5 kW / 1.1 kW Motor power at 60 Hz 1.8 kW / 1.3 kW Weight / color 73 kg / RAL 5012

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] Celiouhabtsnfq Rjgt - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Cgsliju Nyg Ujnfq Rot Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Machine Height: 2.56m

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm table-size 700 x 500 mm spindle taper MT 3 number of spindle speeds 65 - 1750 UpM total power requirement 1,7 kW weight of the machine ca. 0,7 t Cslisu Rt Hqonfq Rsgt dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Condition: good (used), Handpieces, for flexible shaft machine, quill machining unit, drilling machine, drilling machine, pillar drill, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Suhner Cgslecgan Tsinfq Rot -Drawing No.: 010 281 02 -without: drive -Hole: Ø 14 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 140/33/H33 mm -Weight: 6 kg/piece

Condition: like new (used), Year of construction: 2011, Ficep Automatic Drill & Raveel 1104 DFRC This line is fully automated Cslinfot Tmdgsq Rjgt All two machine have been completely cleaned and checked. Ficep Drill 1104 DRFC Year built: 2011 Weight 15,000 Ficep Raveel machine 1101 FRC Year built: 2017 The pincher has a single clamp Length input and output: Input: 18 Meters Output: 15.3 Meter Also there is a document added there are all the specifications on it. If you want more pictures or information please contact us.

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter Cjlinfqoikrtqo Rjgt - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: good (used), 12-head drilling machine for sale, Cslinopy D Dwefq Regt Table size: 400 x 360 mm

Condition: used, Year of construction: 2019, operating hours: 12,000 h, Functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles Cslinfjtnf Iysq Rogt APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: new, Year of construction: 2023, Pipe drilling / slant drilling machine automatic drilling machine TDM100 2D AT - automaticwith two opposite drilling units - minimum quantity lubrication - manual material clamping - automatic feed and automatic pipe turning - max. pipe length 3.000mm - positioning accuracy +/- 0,2mm - power drilling unit 2 x 2,2 kW - manual insertion and removal of material - drilling heads +/- 50° swiveling - manual 360 degree swiveling Cslielgzytjnfq Rogt - motor speed 295 - 2950 rpm - operation via touch panel - 100 positions programmable - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: used, Multi-spindle head, multi-spindle drilling head, drilling gear, feed drill Cjlijra Rntsnfq Rsgt -Manufacturer: Desoutter, AFD - AUTOMATIC FEED DRILLS AND TAPPING TIPS -Type: AFDE-40 -Speed: 3800 rpm -Multi-spindle head: Desoutter type 174183 distance 10 to 67 mm -Engine: ABB 0.33 kW -built-in collets: Ø 3 mm -Quantity: 1 piece available -Dimensions: 890/220/H150mm -Weight: 12kg

Condition: like new (used), Year of construction: 2011, Ficep Automatic Drill & Raveel 1204 DFRC This line is fully automated All two machine have been completely cleaned and checked. Ficep Drill 1204 DRFC Celijt Dv N Hjnfq Rogt Year built: 2011 Weight 15,000 Ficep Raveel machine 1201 FRC Year built: 2017 The pincher has a double clamp Length input and output: Input: 28M Output: 28M Also there is a document added there are all the specifications on it. If you want more pictures or information please contact us.

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm Cgolinfegd Ipkeq Rst autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Year of construction: 1993, Condition: ready for operation (used), Drilling machine Schüco 293784, built 1993, for drilling door hinges, 8 drill shots, Cgelinfqjd R Sdyj Ret

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 Cgelinfslgvkieq Ret - Drilling up to Ø 50mm

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed stroke: 150 mm -Drive: 1.1 kW 2750 rpm -Thread: M8 Cgjlinfecgqdfoq Ret -Number: 3x drill heads available -Price: per piece -Dimensions: 700/180/H180 mm -Weight: 26 kg/piece

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 150 mm -Drive: 1.5 kW 2750 rpm -Admission: thread -Number: 1x drill heads available Celsci Ahteinfq Rogt -Price: per piece -Dimensions: 700/200/H180 mm -Weight: 18.3 kg/piece