Used Complete factories / machine bundles for sale (21)

Condition: used, Press system : Continuous / Calender Major suppliers : Bison / Berstorff Design capacity : 160 m³/day Capacity achieved approx. : 200 m³/day Effective working time : 23 h/day Reference thickness : 3,2 mm Max. gross board width : 2500 mm Fslrdjul H Nms I T Djpg Max. net board length : 2440 mm Max. net board width : Unlimit Min. net board width : 1220 mm (splitting) Min. board thickness : 2,0 mm Max. board thickness : 10 mm Electric system : 380 V, 50 Hz Year of manufacture : 1985 Major upgrades : 2007-2009, 2016 Operated until : May 2018

Condition: excellent (used), Year of construction: 2022, Hello. I have a complete B-Pro Type-C press for sale, along with a gantry crane (L=5m H=3m), track (12m), and tables. The equipment is from 2022 in very good condition, recently the hydraulic oil, contactor in the electrical box, power cable were replaced, and the actuator was also regenerated. The press can be viewed and checked from Mon-Fri in Radzionków by prior arrangement between 7:00-14:00. Available for collection around June. I invite you. Fpolrd Iewh R Dpj T Dsg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Complete gluing plant, approx. 15 years Fslrev Diacjd I T Dopg Can only be sold as a complete system Disassembly/assembly/commissioning can be carried out all over the world

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, A complete glulam production line is for sale. The system consists of components from System TM, feeding, finger jointing technology NKT, automation HIT (multi-level storage, transport, patching station, feeding, lamella planer and Kallesoe, etc.), REX planing machines, pre-planer, lamella planer, and finishing planer. Fpsljwgcchjrd I T Dog Kallesoe high-frequency press. The extraction system can also be installed. Pictures to follow.

Condition: used, Functionality: fully functional, total length: 39,000 mm, turning diameter: 190 mm, input voltage: 400 V, motor voltage: 400 V, frequency: 50 Hz, Equipment: rotational speed infinitely variable, Log and pole machines A complete set of factory machines, last used in 8/2024. The machines can be used to produce round wood products from fresh wood. The large rotors are Cambio brand. Fjlrd Ijufwnxe T Djpg The product can be, for example, a log house or a round log pole. The thickness of the finished wood can be, for example, 150, 170, 190, 210 or 230 mm. Its length can be up to 20 meters. Example capacity about 150,000 meters/year. The total length of the line is about 39 meters + 30 meters, but it can be shortened. You only need electricity and a hall without heating. Also includes sawdust conveyors over 30 meters. Affordable price on request. I will send more pictures and information about the factory machines personally. If the buyer needs help starting the machines, we will help.

Condition: used, No. 3212 Machine package joinery Ott, HOLZ-HER, Martin, WEINIG Used, sold only as a package Consisting of: - Pendulum saw Bäuerle PKS Roller conveyor 2000 mm & 3000 mm - 2 sprayers Wagner - Paint mist extraction wall AL-KO mobile - Slot drilling machine Frommia 270 - Column drilling machine FLOTT 13 STW - Veneer saw Scheer FM 8 - 3100 With pneumatic clamping beam - Dowel boring machine Gannomat RB 110 - Blum hardware drilling machine - Cross-cut saw Omga - Extraction system AL-KO Mobil Jet 2000 - Edge banding machine Ott Pacific V 6 - F Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine router, flush bevel 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) - Vertical panel saw HOLZ-HER 1216 Cutting dimensions: 5300 x 2200 mm - Angular system for window production WEINIG Unicontrol 5P - Chain cutter Rapid - Chain cutter HAFFNER SL 100 - Briquetting press Spänex SHB 50 incl. filter system - Edge grinding machine MAKA - Table milling machine Martin T 25 - 4-sided planer WEINIG Profimat 22 N - CNC processing center SCM Record 20 - Frame press Hess Variant - Long belt sander Johannsen T 82 K (pneumatic) - Wide belt sander Sandingmaster KCSB 1100 - Cross-cut and mitre saw Graule - Compressor Schneider 620-270 ST, incl. air dryer - Chipper / shredder WEIMA Eco 600 Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Fjlrd I Tsv N Hbue Depg Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2023, operating hours: 1,728 h, Functionality: fully functional, power: 40 kW (54.38 HP), Instalatia este compusă din: 1. Buncar cu banda de alimentare - Dotat cu banda transportoare cu lungimea de 4 000 mm si laţimea de 300 mm • Banda ruleaza pe tabla. Dotat cu o cuvă metalică de preluare • Motoreductorul la banda este 2,2 kw • Dotată cu racleti drepţi H55 mm • Descarcare in sită rotativă 2. Șnec de alimentare cu sită rotativă de cernere - Șnec destinat transportului materiei prime în uscătorul aerodinamic, având L 3000 mm, dotat cu motoreductor de 1,5 kw, cuvă de preluare de 1,2 mc și convertizor de frecvență. • Dotat cu o sită rotativă de cernere pentru rumeguș, prevăzută cu două site – motoreductor 0,55 kw 3. Uscător aerodinamic UA220 Extra * Este destinat uscării de rumeguș, având un diametru mai mic de 5 mm și o lungime mai mică de 7 mm. • Capacitatea de producție este de 200-350 kg/h • Diametru sistem = 220/440 mm • Motor exhaustor = 3 kw, debit de aer exhaustor = 5 990 mc/h • Înălțime = 3 500 mm • Vopsit cu vopsea specială de temperatură argintie • Temperatură aer la intrare = 300-350 C • Energia necesară procesului de uscare: • -lemne=45 kg/h -cărbune=30kg/h • Este dotat cu sobă șamotată, horn și ciclon de descărcare prevăzut cu valvă stelară de despăfuire motoreductor 0,75 kw 4. Snec dozator * Șnec destinat transportului materiei prime din uscătorul aerodinamic în presa de peleți, având L 3000 mm, dotat cu motoreductor de 1,5 kw și cuvă de preluare de 1,2 mc. Permite reglajul debitului de material. Fpelrd Ijwdwbae T Dsg 5. Presa pentru peleti Miller 15 kw - Transmisie prin curele - Matriță fixată cu șuruburi frontale - Role ajustabile cu pârghii și șuruburi - Buncăr superior complet cu niveluri min/max - Șnec pentru alimentarea presei cu reglare automată controlată de un invertor - Piese care intră în contact cu produsul final din oțel inoxidabil - Pompă de gresare pentru lubrifierea automată la sfârșitul ciclului - Pompă de ulei automată temporizată pentru lubrifierea la sfârșitul ciclului - Producție orară de 180-220 kg/h, în funcție de tipul de lemn 6. Sita vibratoare - Sita vibratoare pentru separarea prafului, completă cu conexiune la aspirator, care permite parțial răcirea și curățarea peleților. 7. Tablou electric - Suport PLC cu toate comenzile la vedere - PLC de 7” cu program în limbă (italiană/engleză) - Predispoziție electrică pentru orice bandă transportoare de descărcare pentru peleți 8. Elevator cu cupe 9. Masina de ambalare PMM-1000 - Buncăr pentru recepția produsului cu colector de conexiune la mașină de 0,75 m³. - Buncăr de alimentare de 65 dm³ conectat la sistemul de dozare vibratoare. - Sistem de vibrație cu celule de încărcare, programabil cu PLC; sacul este ridicat de un cilindru pneumatic, iar după umplere este eliberat. Operatorul pliază clapeta, iar mașina de sudură se poziționează fără a muta sacul. Capacitate: 2 saci/min (15 kg) Volum de pre-încărcare: 30 dm³ Tensiune: 220 V, 50 Hz Presiune aer: min 6-8 bari

Condition: ready for operation (used), Functionality: unexamined, Milling diameter up to 120 mm Milling length 50 - 250 mm Performance depending on milling pattern: 400 - 1200 pieces/h Fpslrd Ijwa Tgws T Dog 2 milling motors, 4 kW each Gear motor 0.75 kW Weight approx. 1300 kg

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, working width: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! A complete, fully CNC-controlled planer is for sale. A viewing/training session is available upon purchase prior to disassembly! TECHNICAL DETAILS Costa Planer Number of spindles: 10 Control: CNC Spindle Configuration 1. Spindle horizontal 2. Lifting spindle right vertical 3. Lifting spindle left vertical 4. Lifting spindle horizontal 5. Lifting spindle right vertical 6. Lifting spindle left vertical 7. Lifting spindle top horizontal 8. Lifting spindle bottom horizontal 9. Lifting spindle bottom horizontal 10. Jointer spindle bottom horizontal 1x Canali Band Saw 1x Büttfering Sander Working Width: 1100 mm Number of Units: 3 1x Combination Unit 1x Single Unit 1x Brush Unit Conveyor Technology Stacking Unit Rupa Vacuum Lifter (age: approx. 1.5 years) Fpelrev Up Dped I T Djg Cross Conveyor 2x Longitudinal/Cross Conveyors Roller Conveyor with Discharge Roller Conveyor to Büttfering Sanding machine Lifting platform Maintenance was always carried out at regular intervals and professionally. Previous application: Production of wainscoting and parquet (panels) Reason for sale: New construction Machine available from September 2025!

Year of construction: 2025, Condition: new, Butterfly table 12m long - available from stock! available immediately! BOOSTON - We are a manufacturer of machinery and equipment for timber frame prefab house manufacturing. Buy directly from the manufacturer! Quality guarantee, short lead time. We offer an assembly table - hydraulic (butterfly table) consisting of two wings with a length of 12.0m (available models from 6m to 12m). -Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm Fpjlrd Iomrtx Uo T Dog - Permissible load on the table: 95kg/1m2 (for a 12m table - total of 3500kg) - Sturdy powder-coated steel construction - Holes for mounting SD-01 clamping cylinders

Year of construction: 2009, Condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Felsiiia Rerd I T Depg

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 Felevxrynsrd I T Djpg - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1995, Condition: like new (used), Woodworking machinery used for production of wooden frames for upholstered furniture an coffee tables. List includes: Crosscut saw, formatting saw, bandsaw, planer, thinner, contact grinder, surface grinder, edge grinder, table milling machines, CNC Cosmec, CNC Exakta, Tennoning machine, Mortising macine, 4-sida planner/profiler and more. Fpelrdjiwxgkj I T Dog Complete manufacturing documentation, machining templates and some semi-finished products.

Condition: not inspected (used), consisting of: Fpjlrd I Tei Az Dms Dog - Upsetting device SAMCO type RP for upsetting the slat ends - Slat grooving machine. MUNZ, year 1984 for milling of grooves for shutters, working on both sides - frame press ITALPRESSE type Program 30 length of folding shutters max. 3000 mm width max. 700 mm vertical pressure adjustable up to 8000 kg Horizontal pressure 2500 kg

Year of construction: 2011, Condition: excellent (used), This is a complete system for building a house. Prices are listed under the individual items. consisting of the following individual elements (see also attached document): Pictures will follow, are already attached in the document. Table 1 (insertion and clamping of the frame work) 34500 Euro Liftable longitudinal transport with 3 hinged conveyors and planking Pneumatic cross clamping Connections for compressed air and electricity Table 2 (placing the 1st planking and fastening) 25300 Euro Longitudinal transport with 3 hinged conveyors and planking Pneumatic cross clamping Connections for compressed air and electricity Intermediate transport 3 m long 4600 Euro (Parking station for multifunction bridge) Longitudinal transport with 3 hinged conveyors Table 3 (placing the 2nd planking, fastening 35650 Euro and turning the element onto the next table) Longitudinal transport with 3 hinge conveyors and planking Pneumatic transverse clamping Connections for compressed air and electricity Hydraulic turning device Table 4 (installation of electricity and insulation) 34500 Euro Cross transport with rollers and planking Table cross travel Connections for compressed air and electricity Hydraulic turning device Table 5 (placing the 1st planking and 32775 fixing the 2nd side) Longitudinal transport with 3 hinged conveyors Cross transport with rollers Pneumatic transverse clamping Connections for compressed air and electricity Intermediate transport 3 m long 4600 Euro (Parking station for multifunction bridge) Longitudinal transport with 3 hinged conveyors Table 6 (laying the 2nd planking and fastening) 28750 Euro Longitudinal transport with 3 hinged conveyors Pneumatic transverse clamping Connections for compressed air and electricity Table 7 (installation and distribution table) 29900 Euro Longitudinal transport with 3 hinged conveyors Hydraulic swivel unit Table cross-travel unit Upper guide to hold the walls in the vertical position Manual surface gantry with vacuum lifter on table 2 13800 Euro (placing the 1st planking layer) Load capacity 85 kg with narrow vacuum unit Steel substructure with smooth-running rails Travel distance 12 x 5 m Manual surface gantry with vacuum lifter on table 3 13800Euro (Placement of the 2nd planking layer) Load capacity 85 kg with narrow vacuum unit Steel substructure with smooth-running rails Travel distance 12 x 5 m Manual surface gantry with vacuum lifter on table 5 13800 Euro (placement of the 1st planking layer on the 2nd side) Load capacity 85 kg with narrow vacuum unit Steel substructure with smooth-running rails Travel distance 12 x 5 m Manual surface gantry with vacuum lifter on table 6 13800 Euro (Placement of the 2nd planking layer on the 2nd side) Load capacity 85 kg with narrow vacuum unit Steel substructure with smooth-running rails Travel distance 12 x 5 m Wall bearing 1: 12 m long x 24 tracks 11500 Euro Folrdsu D Amgo I T Depg Wall bearing 2: 12 m long x 20 tracks 2 tables (butterfly turner) 25300 Euro Manufacturer Burmek? Vacuum lifter with column-mounted slewing crane 9200 Euro Manufacturer Schmalz Carpenter's table 23000 Euro Manufacturer WEINMANN Year of construction 2011 10 m long with hydraulic swivel unit and transverse clamping Take-off table 12075 Euro Manufacturer unknown 10 m long with hydraulic swivel unit 1 spreader beam 2 to Abus 20125 Euro 1 spreader beam 2 to DEMAG 2 work tables 12 x 3 m 24150 Euro Manufacturer Junker

Condition: ready for operation (used), Functionality: fully functional, Machines for full production of Birch dimensional parts: 1) Vesto ZHL-64x2 2) Raimann ProfiRip KM 310 M 3) Leadermac LMC-523SP Fpslrd Iettmm Re T Dsg 4) WoodEye 5, W5-CC-4444 5) Paul 11KE 6) SCM Group Celaschi Progress 7) Weinig AG Unimat 23 EL All conveyors and aspiration tubes are included.

Year of construction: 2011, Condition: used, Functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. Fpelrdsi Ezx Dj I T Dog 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Year of construction: 1980, Condition: excellent (used), Complete line to make handles inclufing lathe - boring and sanding machine composed of : 1°machine : rotating machine for cutting the pieces. Max. length of pieces to cut : 1500 mm. The machine has a circular saw which cut the pieces up the max. length of 300 mm . 2°machine , Drilling macchine with automatic hopper feed. The cutting pieces by the 1st machine are loaded manually in the magazine (hopper ffeed) of the drilling machine and automatically transfered to the 3rd machine 3°machine: HEMPEL mod. FED 25 – Automatic rotating milling machine with shaped tools which make the handels. The type of handel depend of the tools mounted in the machine. 4° Machine : HEMPEL PB 300 Automatic totating sanding machine with automatic hopper feed . Fpelsidmt Nerd I T Djg The pieces are manually insert on the hopper feed Daily production , from 5000 to 7000 pieces in 8 hour. Max length of working pieces 300 mm There are many shaped tools for different handle shape Machine are in perfectly working conditions.

Condition: good (used), Year of construction: 2008, I sell the complete set of machines for production of wooden dowels. Year: 1993 - 2008 Folrdjt I U Amj I T Djpg Brusa di Garboli TA30 L.Loser AA200 Moulders Cutting machines with feeders Cylinder sanding machines Totally 10 machines. Suitable for dowels 6-8-10-12-16mm. Very good condition. Available immediately

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SD 460, overall weight: 4,050 kg, color: yellow, Hello For sale is a line of Skywood company is a sawmill and a multi-saw with a feeder and transport tables. Folrd Isrrg Eyo T Depg Skywood SD-460 sawmill and Skywood MS-160 single-shaft circular multi-saw plus MS -160 inclined conveyor for offsets. Equipment in very good condition in continuous operation, is replaced by a more extensive line therefore goes for sale. If you have any questions, please contact Mr. Jarek tel. 602 370 012. Greetings and invite you to contact me.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Part of the BIESSE line consisting of: Fpolrjt N N Aqod I T Dog COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.