Used Crankshaft grinding machines for sale (15)

Condition: used, Technical details: grinding diameter: 180 mm Felneu Ng D Ho Uhfiopg swing diameter in the workpiece guard: 300 mm grinding depth: 200 mm stroke of the table: z-Achse: 300 mm control: Siemens 840D Longitudinal adjustment of grinding unit on table max.: 280 mm work piece spindle speed: 200-2000 U/min Load capacity at spindle head max.: 2000 N Passage hole: 55,5 mm Max. travel x-axis: 245 mm Schleifeinrichtung / grinding device rapid traverse adjustment max.: 15 m/min rapid traverse Z-axis: machine table: 15 m/min dressing device: x-axis / x-Achse Hub /stroke: 120 mm weight of the machine ca.: 4,5 t dimension machine xH: 3230x1820x2100 mm

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Foljv N Ra Usn Uhfiepg There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1970, Functionality: fully functional, Matra crankshaft grinder. Not used for about 3 years. Fslewcxwgon Uhfiopg

Condition: used, Year of construction: 1997, workpiece weight (max.): 3,000 kg, clamping length: 3,000 mm, grinding wheel diameter: 800 mm, center height: 500 mm, center height in crank: 1,000 mm, total height: 1,500 mm, I have a lot of Comec Berco Sunnen Az kwik-way machines for sale please write I will reply immediately whatshapp Fpjlev Suvljn Uhfisg

Condition: used, machine/vehicle number: 20308, gr. swing Ø: 600 mm Centre distance: 2200 mm gr. grinding-Ø with grinding wheel 800 mm Ø: 125 mm grinding wheel Ø when using the setting sticks: 20 - 125 mm grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm Fpelnjcik N Sj Uhfieg 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table shift by hand coarse/fine: 10/2 mm automatic. Feed speed of grinding wheel: 0,005 - 0,025 mm 6 table speeds: 120 - 1540 mm/min Grinding headstock drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement : 6100 x 2300 x 1600 mm weight : 7 t

Condition: good (used), Year of construction: 2010, AMC Schou Model K-2000-U Crankshaft Grinding Machine (2010) Serial No. 24035-2010 Year 2010 Swing Over Bed 690mm Distance Between Centres 2190mm Max Distance Between Chucks 2250mm Max Length of stroke 280mm Grinding Wheel Speed 760rpm Grinding Wheel Diameter 813mm Max Workpiece diameter 200mm Coolant Tank Coolant Pump Machine Manual Fsln Uhsuruhksfiepg

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Fpjlou Ng Dton Uhfiog Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, crankshaft length 1200 mm Crankshaft diameter 380 mm grinding wheel diameter 450 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Fpjlov N Rblon Uhfisg subject to prior sale!

Condition: used, Year of construction: 1981, workpiece length 1500 mm Fsln Ujt Hwpmjhfiopg stroke 0 mm swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2013, operating hours: 2,730 h, Functionality: fully functional, workpiece weight (max.): 150 kg, clamping length: 1,700 mm, grinding wheel diameter: 660 mm, center height: 270 mm, grinding length: 1,500 mm, 1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 year of construction 2013 Technical data Max. Sanding diameter for orbital sanding 220 mm Max. Sanding diameter for cylindrical sanding 300 mm Max. Workpiece weight between the centers 150 kg Center height above table 270 mm Center width 1700 mm Max. Sanding length 1500 mm Chuck diameter 180 mm Tailstock quill travel 50 mm Max. Grinding wheel diameter 660 mm Min. / max. grinding wheel width 20/80 mm Max. Peripheral speed 35/80 m/sec. Grinding spindle head (X-axis) Axis drive with linear motor - travel distance 490 mm Measuring device optical scale Resolution 0.0001 mm Workpiece head (C-axis) Speed range of the workpiece spindle 1 - 1000 rpm. Encoder measuring range - resolution 0.0001 degrees Table (Z-axis) Axis drive with linear motor Fsln Usu R Nvushfijpg Measuring device optical scale - resolution 0.0001 mm Machine dimensions L x W x H 5500 x 2600 x 2000 mm Space requirement Approx. 7,500 x 5,000 mm Weight of the machine 9850 kg Accessories CNC control Siemens 840 D

Condition: excellent (used), Berco rtm 350 crankshaft grinding machine for sale in very good condition, equipped with a diamond cutter for quick grinding of the grinding wheel (brand new diamond), new plates, central water unit equipped with a magnetic roller for chip cleaning, complete original instruction manual 4 wheels with their wheel holders etc... Fpjln Uhjiv H Hzofiog

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Fpjln Uhfst Uuf Ueijg Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, crankshaft length 680 mm Crankshaft diameter 180 mm Grinding wheel diameter spindle 1 400 mm Grinding wheel diameter spindle 2 100 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fpoln Uev N N U Dehfieg There are 7 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Folst Uufbjn Uhfiepg Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, crankshaft length 635 mm Crankshaft diameter 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Folnsv N Rbrs Uhfiepg Subject to changes and errors in the technical data and information, as well as subject to prior sale!