Condition: excellent (used), Year of construction: 2018, operating hours: 3,066 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller model: Siemens, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG CMX 50 with long-distance automation Robotrex 52 including new tool holders Year of manufacture: 2018 Operating hours: 3066 Control: DMG MORI SLIMline Multi-Touch Control Siemens 840D sl (19") Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 450 mm Number of stations: 30 Spindle speed: 12,000 rpm Tool holder: BT40 Csb Ezev Skbqstc Aogt Coolant/air blast switching via M function Machine weight: 4,700 kg Direct X, Y, Z position measuring system Probe kit for SIEMENS control -PP40 probe with optical signal transmission -TS27R probe for tool measurement -Calibration mandrel with Tool holder -Calibration ring -Transport case 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations, including preparation Production package 1 with chip tray -Internal coolant supply 12 bar -Chip tray, tank capacity: 205 l -Bed and ATC (Automatic Tool Changer) flushing via M-function -Coolant spray gun -External electronic handwheel -Cabin roof -4-color signal lamp Oil and emulsion mist separator Tool loading and unloading Tool loading and unloading through magazine door during automatic operation Option includes: -Tool magazine door -Automatic magazine closer (instead of brushes) -Buttons for magazine rotation For SIEMENS control system Double cartridge filter for coolant Option includes two switchable filters for uninterrupted maintenance Tropical package Option Includes: -Active cooling unit for the control cabinet -Additional fan in the control panel -Hydraulic oil temperature sensor Equipment: Lang Automation Robotrex 52 Automation system: Lang Robotrex 52 Number of vices: 60 vices Automatic workpiece loading for efficient series production Robot compatible with all CNC controls Condition: Maintenance: The machine is regularly serviced, with very few operating hours. Wear and tear: No significant wear – almost new. Availability: Immediately available

Year of construction: 2000, Condition: ready for operation (used), Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible. Cjb Eztcov Rp Tie Aogt

Condition: ready for operation (used), Year of construction: 2010, 1 x 3+2-axis CNC machining center Type DMU 70 with Heidenhain iTNC 530 control Make: DMG Year of manufacture: 2010 Technical specifications Working area: - Travels X-axis 750 mm Y-axis 600 mm Cob Ejv Rniceztc Aogt Z-axis 520 mm - Swivel rotary table 800 x 620 mm - Table load max. 350 kg - Swivel range -10 degrees to +95 degrees Main spindle drive: - Spindle speed 20 - 14,000 rpm - Spindle taper SK 40 Tool changer: - Magazine positions 16 Space requirement LxWxH approx. 2.9 x 2.65 x 2.95 m Machine weight approx. 7 t Equipment Two tool holders Electric handwheel, measuring probe Delivery base: ex-works, manufactured in Thuringia Delivery date: by arrangement, possible at short notice

Condition: excellent (used), Year of construction: 2000, Make: SNK (Japan) Number of axes: ( 5 axes ) Year: 1999/2000 Cgob Eztcsv Rxarj Ajt Table: 3150 x1250 mm Travel xyz: 3050 x 1270 x 800mm Spindle head tilt +/- 25 degrees Fanuc 16 M A axes cross plane carrier (+ or - 25 Deg) 50 degrees B axes longitudinal plane spindle carrier (+ or - 25 Deg) 50 degrees Spindle taper BT 50 Spindle speed up to 6000 rpm Full 5 axis simultaneous contouring control

Condition: used, _____ Csb Ezjvqa Taotc Aogt Description: Year of manuf. : 2013 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 400/240/436 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power (max.):16,6 kW Taper:HSK-40 NC-Swivelroundtable: B-Axis:-105°/+20° C-Axis:360° Workpiececlamping:EROWA PowerChuck ø150 mm In general: Toolmagazine:60 stations Rapid travers in X/Y/Z:40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Workpiececlamping:Touch probe, Renishaw OMP 40-2 Automation I:Automatic Door, pneumatic Automation II:Interface robot Further Accessory:Blow-off station in working are, Spindle chiller

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Pallet storage: 5-station Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Cjb Ejv N Hmwsztc Ajgt Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1242, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, nominal power (apparent): 35 kVA, rotational speed (min.): 28,000 rpm, overall weight: 15,300 kg, spindle speed (min.): 28,000 rpm, spindle speed (max.): 28,000 rpm, operating hours of spindle: 1,500 h, coolant supply: 23 bar, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, GROB G350 – Used 5-axis milling machine in top condition! 🔹 Model: GROB G350 🔹 Year of manufacture: 2013 🔹 Condition: Very good, regularly serviced (see photo) 🔹 Location: Our sister company's warehouse in Denmark (not powered) 🔹 Viewing: Possible at any time 🔹 Equipment: Extensive accessories included (details in the PDF (!!!!!)) The machine includes: Tool cleaning system Laser measuring system for tool monitoring and tool breakage detection Infrared measuring probe Heidenhein TNC530 control system High-pressure coolant pump Oil skimmer for coolant maintenance Cobev N Hqcs Eztc Aogt The machine is no longer needed and is therefore for sale. Take advantage of this opportunity to acquire a high-quality and well-maintained GROB G350!

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, torque: 980 Nm, controller manufacturer: Siemens, controller model: 840D-Powerline, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, table width: 800 mm, table length: 630 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,963 h, coolant supply: 40 bar, spindle motor power: 32,000 W, number of slots in tool magazine: 180, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Cgsb Ezjui Np Rjtc Ast Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: good (used), Year of construction: 2005, Universal machining center Machine type: DMG DMF 250 linear Control: Heidenhain iTNC 530 Year of manufacture: 2005 TECHNICAL DATA: Travel paths: X-axis: 2,500 mm Y-axis: 920 mm Z-axis: 800 mm B-axis C-axis Rapid traverse: (X/Y/Z): 100 / 60 / 60 m/min. Feed: (X/Y/Z): 20 m/min. Number of controlled axes: 5 Swivel head Speed range: 18,000 rpm. Tool holder: SK 40 Ceb Ezjv Nn Iietc Ajgt Tool changer Tool positions: 30 NC rotary table: Ø 700 Features: No internal cooling (IKZ): 40 Chip conveyor Linear measuring systems on all 3 axes. Measuring probe: Heidenhain

Condition: excellent (used), Year of construction: 2002, AXA Vario 2 Year 2002 Travel X : 1700 mm Travel y : 600 mm Travel z: 600 mm 1,760 mm or 2 x 700 mm Cob Ezeumhumjtc Ajgt IKZ Tool changer : 22 times / SK 40 8000 1/min

Condition: good (used), Year of construction: 2008, Universal machining center: Moving column Machine type: AXA VHC 2 - 1760 XTS Cob Eztcsv Nhwds Asgt Control: Siemens 840 D ShopMill Year of construction: 2008 TECHNICAL DATA: Travels: X-axis: 1,760 (2 x 630) mm Y-axis: 600 mm Z-axis: 800 horizontal or 770 vertical mm A-axis B-axis: +/- 100°, hydraulically clamped, infinitely variable interpolation Rapid traverse: (X/Y/Z): 40 / 40 / 30 m/min. Number of controlled axes: 5 Speed range: 30 - 6,000 1/min. Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool changer Tool positions: 36 NC rotary table: AXA RTA 4L-520 Faceplate: Ø 520, for vertical & horizontal setup mm Tailstock: manual, center height 280 mm Machine weight: 12,000 kg Space requirement (LxWxH): 5.2 x 3.4 x 3.3 m Equipment features: Internal cooling (IKZ): 30 bar Chip conveyor: Discharging to the left, integrated 200 l coolant tank Coolant system Coolant tank: 400 l Measuring probe: 3 D, Renishaw RMP 60 with RMI receiver (wireless version) Optional use of external cooling with compressed air or emulsion Direct path measuring system: Heidenhain Operating mode: 4 Separating plate for work table for pendulum machining Hardened flat guides Counter guides coated with sliding surface (Turcite) Renewal of the sliding surface of the basic slide X/Y in 2022.

Condition: good (used), Year of construction: 2013, 5-axis machining center - gantry milling machine Manufacturer: PARPAS Machine model: Diamond Linear Control: Heidenhain iTNC 530 Year of manufacture: 2013 Number of controlled axes: 5 TECHNICAL DATA Travel paths - X-axis: (mm) 2,200 - Y-axis: (mm) 1,500 - Z-axis: (mm) 1,000 - C-axis (milling head): (degrees) +/- 370 - A-axis (milling head): (degrees) +/- 105 Distance between the columns: (mm) 2,700 Distance between table surface and spindle tip with milling head mounted max.: (mm) 1,220 - X and Y axis: (m/min) 60 - Z axis: (m/min 40 Spindle 5-axis orthogonal milling head - Internal coolant supply (IKZ): (bar) 20 - Spindle speed max.: (rpm) 20,000 - Drive power S1 / S6: (kW) 29 / 37 - Torque S1 / S6: (Nm) 92 / 115 Tool magazine - Tool holder: HSK 63 A - Tool positions: 42 - Tool diameter: (mm) 80 - Tool length: (mm) 350 - Tool weight: (kg) 6 Machine table - Table size L x W: (mm) 2,300 x 1,600 - Distance between T-slots: (mm) 200 - T-slot dimensions: (mm) 22 - Max. workpiece weight: (kg/m²) 6,000 EQUIPMENT FEATURES + Heidenhain iTNC control 530 + Portal (gantry) design: U-shaped "monoblock" construction with a traverse and stationary workpiece + Milling head (A and C axis), A axis with torque motor and hydraulic clamping, A axis arranged at right angles to the C axis + Machine does not require a foundation + Glass scales in linear axes X, Y and Z. + C axis with Heidenhain angle measuring system, resolution 0.001 degrees + Electronic handwheel Heidenhain HR 520 + Chip conveyor 2 pieces (one each on the front and back of the table) + Chip flushing gun + Internal cooling (IKZ) 20 bar + Paper filter device Cgjb Eztjvytd Rjc Ast + Sliding roof with opening for loading and unloading + Supply of blown air and water through the spindle Weight: approx. 30,000 kg Subject to changes and errors in the technical data and information.

Condition: good (used), Year of construction: 2013, operating hours: 46,168 h, Functionality: fully functional, machine/vehicle number: 8087020544B, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller manufacturer: Fanuc, controller model: Fanuc 310, overall weight: 9,500 kg, spindle speed (max.): 5,000 rpm, Equipment: chip conveyor, Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 2 turrets, and Y-axis) Spindle bore diameter: 65 mm Spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm X-axis travel: 165 / 165 / 165 Y-axis travel: 80 mm Z-axis travel: 220 / 150 / 650 mm Number of tools on turret: 12 (2 x 12) Tool taper: VDI 30 Cgsb Ezev Rapuotc Aot Bar loader: Breuing SiMag

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, table width: 1,400 mm, table length: 1,600 mm, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Cgeb Eztevwm Rfoc Ajt If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 26588, INGERSOLL_5-AXIS PLANO MILLER TYPE DOUBLE COLUMN VMC - USED MACHINE Ceb Eswbf T Ssztc Aogt X-AXIS TRAVEL(Table Travel) - 9550mm Y-AXIS TRAVEL(Cross Travel) - 5867mm Z-AXIS TRAVEL(Vertical Travel) - 990mm W-AXIS TRAVEL(Cross Rail Travel) - 2448mm C-AXIS TRAVEL(MNasterhead Drum) - 360 degrees Pallet Size - 10,000mm x 3,479mm Pallet Load Capacity - 44,000 LBS

Condition: like new (used), Year of construction: 2014, operating hours: 16,000 h, DMG MORI GM 35-6 Year of manufacture: 2014 Bar loader: CUCCHI GOVANNI Cgjb Eztsv N Ez Hoc Aet Operating hours: approx. 16,000 hours A live viewing is available.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor Cgjb Eztcovyr Tdj Ast >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. Cjb Eztcju Idm Nj Asgt *

Condition: used, Year of construction: 1999, operating hours: 35,195 h, Functionality: fully functional, machine/vehicle number: 107.53.98.049, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, overall weight: 5 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 20,487 h, spindle motor power: 11 W, number of slots in tool magazine: 40, input voltage: 380 V, Equipment: documentation/manual, rotational speed infinitely variable, with Heidenhain control TNC 426, with tool changer with 44 tools, all axes with flat guides, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup. Ceb Ezjv Ibw Uotc Asgt

Condition: defective spare-parts repository (used), Year of construction: 2000, 5-axis machining center DMG Type:DMU125 P Year 2000 Control Heidenhain TNC430 Machine with HV milling head and NC swivel rotary table. Spindle holder ISO 50 Spindle speeds up to : 8000 rpm Travel X 1250 mm Y 880 mm Z 800 mm A-axis and B-axis Tool magazine pos.120 . Ceb Eztouwnzvoc Aogt Machine documentation available Machine is not ready for use without chip conveyor .

Condition: used, Year of construction: 2008, Very well-preserved 5 AX machine with 60 tools Heidenhain iTNC 530 NC rotary table 1000 x 600mm with 600 rotary table Controlled NC swivel head -120 / +30 degrees Infrared measuring probe 3D Quickset 600 liters of coolant 40 bar Flushing gun Electronic handwheel Operating mode 4 Cgob Eztsv Ippxjc Ajt Complete documentation

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain training machine few spindle hours Huznepo Technical data: >> Year of manufacture 1998 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system Cgsb Ejvyr Rpjztc Ast >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T was used for training in a large company and has few spindle hours. Take the opportunity to view and try out the machine on site with power on.

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical Ceb Eztcsu Idlfs Ajgt special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: excellent (used), Functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 Cob Eztsvyr N Ssc Asgt >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: used, Year of construction: 1999, Technical details: x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm max. thread Ø M30 Cjb Ezju Id Rbetc Aegt 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *