Condition: excellent (used), Functionality: fully functional, Machining center - Universal DMG DECKEL-MAHO type DMU 50 eV / 5 axes with Heidenhain Millplus control Super condition !!! Deb Esu A Dlzjaityeut Technical data: >> Year of construction approx. 2000 >> Heidenhain Millplus control system >> 5-axis machine with B + C - axis SIMULTAN >> Travels X500/Y420/Z380 >> Total power requirement 40 kVA >>Tool holder spindle taper SK40 >> Max. spindle speed up to 18000 1/min >> Feed X, Y, Z 20,000 mm/min Rapid traverse X, Y, Z 50 m/min Dpoyvp >> Tool magazine: chain magazine 32 places (2x 16 places) >> NC rotary table diameter 500mm x 380mm, 7 grooves 14mm, 63mm distance >> Table load 200 KG >> Hydraulic clamping device >> Dimensions and weight: Machine space requirement including operation and maintenance Depth 5.0 meters Width 4.0 meters Height 2.6 meters Weight approx. 5000 kg >> Machine documents >> Coolant system >> abgel. Operating hours machine ON: 49838 Spindle run: 20508 Issj23A About the machine : We offer a machining center DMG DECKEL-MAHO type DMU 50 Evolution 5 axes with a Heidenhain Millplus contouring control. The machine is in very good condition. The axes and speed spindle run smoothly. Take the opportunity to inspect and try out the machine on site under power.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 51,071 h, Functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Speed: 10,000 rpm B-axis: automatic Number of places in the tool changer: 120  Tool holder: SK-50  Number of pallets: 4 pieces Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Switch-on time: 51,072 h Spindle hours: 16,261 h Transport dimensions of machine: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D path control - blowing air spindle center - measuring probe: TS 641 - flushing gun - documentation - chip conveyor (hinge belt) - coolant system - preparation for oil mist extraction Dsb Eaitsvtptujysut

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 15495585144, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 800 mm, feed length Y-axis: 650 mm, feed length Z-axis: 550 mm, torque: 100 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 800 mm, workpiece width (max.): 650 mm, workpiece height (max.): 550 mm, workpiece diameter (max.): 830 mm, workpiece weight (max.): 600 kg, total height: 3,010 mm, total length: 3,250 mm, total width: 2,370 mm, table width: 800 mm, table height: 550 mm, table length: 700 mm, table load: 1,000 kg, rotary table diameter: 830 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 18,900 W, number of spindles: 1, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Great Machine with a lot of option Table Dimension 800 x 700mm (11 'T' Slots). Maximum Table Load 600kg. Maximum Workpiece Ø830mm, Maximum Workpiece Height 600mm. Axis Travel 'X'=800mm, 'Y'=650mm, 'Z'=550mm, Dobeum E Iqo Eaityeut 'B'=-5°/+110°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Feedrate 30,000 mm/min. Maximum Spindle Speed 18,000rpm (35kW Motor). Spindle Taper HSK A63. 40 Position ATC. S/No. 15485591574 (2013) With Blum Laser Presetter, Chip Conveyor, Through Coolant Paper Filtration System, Spindle Probe Interface, Visiport Rotation Window & Handwheel. Weight 12,050kg.  Note: Tools Not Included.

Condition: used, Year of construction: 2005, operating hours: 900 h, Functionality: unexamined, machine/vehicle number: 10 1924, travel distance X-axis: 150 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 190 mm, STARTECH SP7 MILLING MACHINE 7 Axes CNC MACHINE DATA: Year of manufacture 2005 Machine No. 10 1924 Total milling time according to machine dealer's information approx. 900 hours!!! (as new) Not in use for approx. 10 years. New price was EURO 153,480.00 Dimensions: L: 2400mm x W: 1500mm x H: 1900mm Weight: 1800k Number of spindles: 14 Number of axes: 7 Spindle speed: 10,000 rpm. Travel X: 150mm Travel Y: 240mm Travel Z: 190mm Power connection: 400V 7KVA 100 liter coolant tank Accessories: Tools and holders as shown in the machine are included Schunk pneumatic vice is included Condition: Used machine PRICE AND LOCATION: Location CH - Rotkreuz Djb Eevvx S Esaityout Other: Machine can be inspected Loading onto car trailer possible / without packaging and load securing etc. Must be picked up and paid in cash. No guarantee. You are welcome to come by for a viewing in 6343 Rotkreuz before purchasing so that no false impression is created about the condition. You will receive a proper invoice or receipt. Subject to prior sale. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. The machines and tools are sold in their current condition (as shown in the pictures) from 6343 Rotkreuz. Untested, optical (see photos). Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: Dujb Eaist Hwqwetyet geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2005, SIEMENS 840D control with B + C axis Working travels 500 x 450 x 400 mm Table swivelling +110°/-5° Dujbouy R Sis Eaityot Table rotating 360° Spindle taper SK40 Spindle speeds -10'000 rpm tool changer 16 pos. Zero point clamping system GOODJ Lock 110 Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Universal milling machine FPS 500M-NC with TNC 128 line control from Heidenhain very good condition Made in Germany !!! Technical data: >> Year of construction 2014 Machine no. 2210-000111 >> Rigid angle table Table surface 420 x 800mm T-slots: Number /width/ spacing 9/ 12H7 / 45mm Permissible load 400 KG >> Main drive: Three-phase brake motor Power: 2.6/3.1 KW 18 gear steps (right and left rotation) Speed range: 25 - 2500 rpm >> Feed drive: Digital drive Dobet Er Rvs Eaityeut Infinitely variable Feed speed 0 to 2000 mm/min Rapid traverse 5-5000 mm/min Handwheel rotation 2.5 mm >> Traverse paths X/Y/Z: 500/350/400 mm Milling head can be moved an additional 150 mm on the Y axis >> Milling spindle can be extended as drilling quill approx. 80 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> Heidenhain line control TNC 128 >> Coolant device >> Cabin >> Central lubrication >> Machine feet >> Counterholder >> Operating instructions, user manuals, etc. To the machine : We are offering a universal milling machine FPS 500M-NC with TNC 128 line control from Heidenhain in very good condition. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for quick and easy data input, e.g.: various drilling cycles, thread cutting, bolt hole circles, hole rows, rectangular pockets, rectangular studs and surface cutting. A reliable and user-friendly machine made in Germany. An oil change has been carried out. Mechanically and electrically tested. Take the opportunity to inspect and try out the Deckel machine on site under power.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, 5-axis machining center including pallet automation TECHNICAL DETAILS Number of axes: 5 X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Dujb Ejtx Uuleaityst Speed: 42,000 rpm Number of tool changer positions: 100 positions Automation: EROWA pallet robot

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 15495585144, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 700 mm, torque: 100 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 1,000 mm, workpiece width (max.): 900 mm, workpiece height (max.): 700 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,000 kg, total height: 3,390 mm, total length: 3,790 mm, total width: 2,960 mm, table width: 950 mm, table height: 700 mm, table length: 800 mm, table load: 1,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 41,407 h, spindle motor power: 18,900 W, number of spindles: 1, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Great Machine with a lot of option. 2013 DMG Mori DMU 100 EVO 5 Axis Universal Machining Centre With Heidenhain ITNC 530 Control. Table Dimension 950 x 800mm (11 'T' Slots). Spindle Taper HSK A63. Dusb Ejum E Hyjaityjt Maximum Spindle Speed 18,000rpm. 60 Position ATC. S/No. 15495585144. With High Pressure Through Paper Filtration Coolant System, Chip Conveyor, Filtermist Fx6002 Mist Extraction Unit, Blum Laser Presetter, Visiport Rotating Window, Wash Gun, Handwheel & Manuals. Weight 17,400kg.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 30006785, Technical details - Total power requirement 55kW - Machine weight approx. 16t - X-travel 800/945mm - Y-travel 800mm - Z-travel 600mm - Spindle speeds 10 – 8,000rpm - Spindle drive 27kW - Table clamping area: 800 630 - Spindle mount ISO 40 - C-axis 360,000 × 0.001° - Table load 600kp Djb Eaitevpta Rsysut - Machine with HEIDENHAIN iTNC 530 CNC control for 5 axes - Pendulum machining with rotary swivel table and fixed machine table - A-axis +10/- 90° - 30-way tool changer - Coolant system, chip conveyor - Complete housing - Spindle running time 26,000h

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Dsb Eovv Npboaityjut X-AXIS MOVEMENT: 650 MM X-AXIS RAPID TRAVERSE: 50 M/MIN Y-AXIS MOVEMENT: 765 MM Y-AXIS RAPID TRAVERSE: 50 M/MIN Z-AXIS MOVEMENT: 510 MM Z-AXIS RAPID TRAVERSE: 50 M/MIN

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Tool breakage control Dusbjtt R E Tj Eaityst Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn machining center Condition used Year of construction 2001 Dujb Eaitou Rnlueyot Switch-on hours: 56376 Spindle hours: 26451 Technical Data: Speed: 18,000 1/min Features: - MillPlus control - 60-fold tool changer - 2-3 pallets - 2-fold pallet changer - Universal head - Geometry problem after crash (test protocol)

Condition: excellent (used), Year of construction: 2020, operating hours: 3,469 h, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, torque: 253 Nm, controller manufacturer: Heidenhein, controller model: TNC 640, table load: 2,000 kg, rotary table diameter: 800 mm, rotational speed (max.): 750 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,469 h, coolant supply: 80 bar, number of spindles: 1, number of slots in tool magazine: 60, milling spindle speed (max.): 12,000 rpm, workpiece spindle speed (max.): 750 rpm, spindle torque (max.): 253 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Milling and turning center Spindle torque: 253NM / 12,000min-1 / HSK 63 Travel paths: 800/900/620mm Dueb Eaitovt Akaeyjt Control: Heidenhein TNC 640 Turning function: 4,000Nm / 750rpm / diameter 800mm / max. 2,000kg Pallet changer: 6-way; pallet weight max. 1 ton (pallet + workpiece) Tool changer: 60 places (expandable to 120 places) incl. pallets optional: 4-jaw chuck SMW Autoblok

Condition: good (used), Year of construction: 2005, operating hours: 13,917 h, Functionality: fully functional, machine/vehicle number: 11590000083, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Bidding obliges the buyer to pick up the machine on time by the end of February. The machine can be viewed under operating conditions until February 6, 2025.  TECHNICAL DETAILS x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control type: Heidenhain iTNC 530 Spindle Max. spindle speed: 12,000 rpm Tool holder: SK40 Tool changer Available: yes Tool positions: 32 MACHINE DETAILS Space requirement: 25 m² Loading dimensions (L x W x H): 3.2 x 2.3 x 2.7 m Weight: 9.6 t Operating hours (as of week 45/2023): 45,746 h Spindle hours (as of week 45/2023): 13,917 h EQUIPMENT - Chip conveyor - External coolant system - 50 x SK40 tool holders Dujb Eevu A S Hjaityet

Condition: used, Year of construction: 1999, Technical details: Dujb Eaistq Nlcstyot x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: TK204204, TEKNA TKE 805 (Emmegi Quadra L0) for sale - Production date machine 2021! CNC 13-axis machining centre, built for milling, drilling and cutting aluminium profiles and light alloys. Optionally it may be equipped with an end milling module. QUADRA L0 is an automatic magazine with a thrust-feed system for profiles up to 7,500 mm, complete with gripper movement to block the profile. Thanks to the movement of the gripper, the feeder returns to the start position allowing the loader to prepare the next profile at the same time. The milling module, the cutting module and the optional end milling module are located in the central area of the machine. There are 4 Dsbsvl Igqo Eaityjut electrospindles installed on the CNC 4-axis milling module which allow working on the whole edge of the workpiece, whichever way it faces. The cutting module is equipped with a Ø 350 blade with CNC 3-axis horizontal movement. The optional end milling module operates on two CNC axes by means of a group of cutting units. QUADRA L0 also includes an automatic ejector to transfer the workpiece from the cutting unit to the unloading magazine. The unit is composed of a transverse belts magazine to unload machined workpieces of up to 4000 mm in length (optional 7500 mm). The machining unit is equipped with a sound-proof cabin in the central operating part, which, besides protecting the operator, reduces the environmental noise impact.

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Duob Esk Dz Ngoaityst Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: Dujbot Hr Ahs Eaityot - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, Functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Dujb Eaitsvtmhpsyjt Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: good (used), Year of construction: 2011, X/Y/Z 600/770/805mm, spindle 12,000 rpm / HSK 63, ATC 40, swivel table unit (A'-axis), rotary table with T-slots (B'-axis) through spindle cooling, all machines with coolant tank, Chip conveyor and belt filter system, CNC Heidenhain iTNC 530; Control: CNC Heidenhain iTNC 530 Dob Eaitjh Hlmcsyout

Condition: used, Year of construction: 2003, operating hours: 14,000 h, Functionality: fully functional, Universal machining center. Control TNC530 Heidenhain. Delivery time immediately. Freight basis ex location. Swivel milling head. Duobjurcyue Eaityst 4-axis Dividing head NIKKEN cpl. overhauled with 2 CNC axes controlled. Tool changer and many accessories.

Condition: used, Year of construction: 2001, 3-axe machine. Axes: X 600, Y, Z 450 Heidenhain 430 Spindle 16000 rpm Machine hours 31000 Internal cooling 40l/min. Dsb Eaioua Autotyjut Inc. chip conveyor.

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories Dob Eaielhqydjtyjut MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,864 h, Functionality: fully functional, machine/vehicle number: 570086, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, nominal power (apparent): 40 kVA, controller model: Heidenhain 426/430, rotational speed (max.): 12,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 3,000 h, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our DMU 70V Evolution 5-axis milling machine is for sale. As we are restructuring, it is no longer needed. The machine is powered and can be inspected. Tools are not included in the price but can be purchased. Technical data: - Year of manufacture 1998 - Control Heidenhain 426/430 - Travel paths X,Y,Z: 710mm x 520mm x 520mm - Spindle: SK40 12000rpm with IKZ - 60-way tool changer - Blum TC50 infrared measuring probe (new in 2019, defective one included) - Chip conveyor - Electronic handwheel - 900L coolant tank - 19864 program run hours (machine is still in use, can still change slightly) In 2022 the machine got a new spindle for around €15,000. Since then it has run for around 3,000 hours. Invoice available. Djb Easvqbahjitysut about the defects: - Rotoclear is defective (viewing window when water is splashed, not important) - Measuring system in Y has to be approached very slowly and frequently when referenced. As soon as it has the reference point, it runs perfectly (measuring system dirty, a repair can be discussed) - some magazine positions need to be replaced (tool holders defective, new ones included) - Tool magazine should be serviced (chain tension, pick-up and drop-off position, wear parts) - Z-axis makes slight noises but still runs perfectly (a refurbished ball screw with nut is included) We have around 300 SK 40 tool holders of all kinds that can be purchased for an additional charge. Videos of the machine can be sent via WhatsApp or email. Help can be provided with dismantling. A crane for loading can be organized. Due to its age, the machine is being sold without a guarantee and as defective.