Condition: reconditioned (used), operating hours: 3,680 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 12,000 rpm, Spindle replacement in 2021 - approximately 3,680 spindle hours since then (estimate) Submission of a bid obligates the buyer to pick up the machine by May 20, 2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Spindle Speed range: max. 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Djbowgaz Iovrr S Ujut Tool holder: SK 40 Table Table diameter: 630 mm Max. table load: 500 kg Tool magazine Number of tool positions: 30 Max. tool length: 350 mm Feed & rapid traverse Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 – 10,000 mm/min Control Control: Heidenhain TNC 426 MACHINE DETAILS Space requirement: approx. 7.0 x 6.0 x 2.7 m Machine weight: 7,500 kg Total power requirement: 44 kVA Operating hours On-time: 89,186 h New spindle running time: 3,680 h (estimated) Total spindle running time: 35,845 h No chucks or vices included in the offer.

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Debvrowcrrder S Ujut Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Maho MH 600W CNC X:600 - Y:400 - Z:400 mm Djbvswiacdsrr S Ueut

Condition: used, Year of construction: 2007, x-travel 650 mm y-travel 550 mm Dsbvswiik Derr S Usut z-travel 500 mm control Andronic tool taper HSK50 numbers of tools in magazin 57 spindle turning speed - stepless 0- 36.000 U/min size of pallet 400 x 400 mm total connected load 25 KVA feed stepless 0- 30000 mm/min rapid traverse 30 m/min total power requirement 17 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m 5 axes machining center with rotating and swivable table (A and C axe). Machine has a pallet changing system for 6 pallets and an ATC with 57 positions. Machine has not much working hours and a overhauled working spindle with HSK 50 reception. We will supply the machine with many holders.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Dujbvrrewig Uge S Ust Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Tool breakage detection

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar Dusbvjwhgrporr S Ujt This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre designed for precision and versatility in complex machining tasks. Ideal for those seeking advanced milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Technical details x-travel 2940 mm y-travel 900 mm z-travel 950 mm Control Heidenhain iTNC 530 Additional information 5-axes Universal Machining Center Travels: X-axis: 2940 / 2 x 1220 mm Y-axis: 900 mm Z-axis: 950 mm CNC swivelling milling head with infinitely variable positioning, directly programmable from -90 to +90 deg. Speed range: 35 to 8000 rpm. Drive power: 20 kW Tool holder: SK 40 Tool positions: 2 x 22 (44) Duobvrowhvntjr S Uot Table size: 3890 x 800 mm Built-in NC rotary table RTA4S800 Equipment: CNC control HEIDENHAIN iTNC 530 Chip conveyor Measuring probe, RENISHAW OMP 60 Coolant system Paper band filter SA 25/600, 20 bar Electronic handwheel Heidenhain HR 410 Operating instructions Machine parameters on storage medium

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Dobvrr Sjwiabms Usut Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm z-travel 650 mm Control HEIDENHAIN TNC 640 spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and can be inspected under power at the seller's premises by prior arrangement. Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool changing device: Double gripper Dusbvrevwgrpor S Uet Magazine slots: 60 (chain magazine) Connected load: 50 kVA Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: used, Year of construction: 1999, x-travel 1000 mm y-travel 500 mm z-travel 500 mm control 18 M Fanuc tool taper ISO 40 numbers of tools in magazin 30 spindle turning speed - stepless 0- 12.000 U/min size of pallet 1000 x 450 mm total connected load 32 KVA feed stepless 0- 30000 mm/min rapid traverse 30 m/min total power requirement 15 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m Vertical machining center with Fanuc 18M control, cooling through spindle, ATC Dusbvrowiikwor S Uot for ISO 40 tool holders and many holders.

Condition: used, Year of construction: 2022, x-travel 450 mm y-travel 600 mm z-travel 330 mm Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center Djbvrr Sewh Ukte Ujut -Equipment & accessories -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, -Tool breakage monitoring, robot cell RS05-2

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 40 U machine we have for sale. Contact us for more information. Dusbvrjwhgrver S Uet Application Types Milling

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 3600 mm y-travel 920 mm z-travel 820 mm Control Siemens 840 D table surface area 4200 x 900 mm table load capacity - central/maximum 4200 kg tool taper HSK-A63 DIN 69893 spindle turning speed - stepless 20 - 18000 U/min feed speeds - 20000 mm/min rapid travel x/y/z 100 / 60 / 60 m/min spindle motor (100/40% ED) 25/35 kW total power requirement 92 kVA weight of the machine ca. 29,5 t dimensions of the machine ca. 10,00 x 6,50 m Additional information Maintenance condition: Regular maintenance, no maintenance backlog. Very good used condition ! * CNC control Siemens Sinumerik 840 D Powerline with ShopMill * Controlled axes 5 * Controlled swivel milling head (B-axis) +/- 90 deg., 1 deg. indexing * C-axis with CNC-rotary table * 126-station ATC 0 - 6,000 rpm Max. tool diameter (with free neighbouring space) 130 mm Max. tool length 360 mm 6,001 - 10,000 rpm. max. tool diameter 100 mm max. tool length 250 mm 10,001 - 12,000 rpm. Duebvrrowhvk Us S Uot max. tool diameter 80 mm max. tool length 250 mm 12,001 - 18,000 rpm. max. tool diameter 50 mm max. tool length 200 mm max. tool weight with automatic tool change 6 kg max. total tool weight in the magazine 180 kg * 5-station Pick-up magazine (additionally installed in the work area) - Max. tool length 450 mm * Chip conveyor * Compact filter system, 900 liters volume * Coolant through spindle 40 bar Without clamping plates, toolholders, etc. Transport dimensions approx. (L x W x H) Machine 7.830 x 3.400 x 3.100 mm Coolant system 2.100 x 1.200 x 2.150 mm Chip conveyor 1.300 x 8.900 x 1.700 mm Working area Travels X-axis 3,600 mm with B-axis travel left 1,316 mm with B-axis travel right 1,399 mm Work table Rigid table Clamping surface 4,200 x 900 mm Distance between T-slots 100 mm Number of T-slots 9 pieces Permissible load of the worktable Rigid table (table centre) 4,200 kg Main drive Drive power 25 KW (100% ED)35 KW (40% ED) Torque 87Nm (100% ED)130Nm (40% ED) Speed Infinitely programmable 20 - 18,000 rpm Speed in set-up mode 20 - 800 rpm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10427 Manufacturer: OMV Type: MAV 412 Dobjwiaaijvrr S Ueut Year of construction: 2000 Type of control: CNC Control: HEIDENHAIN TNC 426/430 Storage location: Halberstadt Country of origin: Italy X-Travel: 1200 mm Y-Travel: 850 mm Z-Travel: 800 mm B-Axis: +/- 95 ° C-Axis: 0,0001 ° NC swivel rotary table: 520 O Table Load: 3000 kg Table surface: 2300 x 980 mm Tool Taper: HSK 63 Tool Piece Magazine With: 20 Pcs./pcs. Spindle Speed: 0 - 16.000 RPM Turning Speed Range - Stepless: 0 - 20.000 mm / min Drive Capacity - Spindle Motor: 26 kW Total Power Requirement: 36 kW Weight Of The Machine Ca.: 17 t Dimensions Of The Machine Ca.: 5,4 x 4,4 x 3,1 m Further information: Operating hours: 32500 h Spindle hours: 10000 h - IKZ (internal cooling) - Milling spindle overhaul: Motor winding, bearing, tool clamp (2022) - AXA FSB400 chip conveyor (year 2021) - Compressed air preparation renewed (2023)

Condition: good (used), Year of construction: 1999, x-travel 2400 mm Duebvrr Ssvwgphe Ust y-travel 2850 mm z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: used, Year of construction: 2009, x-travel 1060 mm y-travel 610 mm z-travel 610 mm table-size 1220 x 510 mm spindle diameter 80 mm tool taper SK 40 spindle turning speed - stepless 10- 10000 U/min feeds 1- 30000 mm/min rapid traverse 30000 mm/min spindle drive 15 kW connected load 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3 x 3,2 x 2,7 m Control: Hurco Ultimax 4. Machine has 24 positions in the ATC, many toolholders Dobvev T Npvjrr S Ujut with the machine, vices, a FLIP-POD Vacuum clamping system, a zero point clamping system SPEEDY classic 3.book and a Elbo Controlli NIKKEN tool set system.

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min size of pallet 800 x 630 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg dimensions of the machine ca. 8,50 x 5,50 x H3,50 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, Duebvrr Sowiii Ho Ust RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Number of axis 5 Dusbvrrjwikbqj S Ust This HERMLE C40 Dynamic was manufactured in 2008. A universal machining centre, it offers robust performance for diverse machining needs. Ideal for those seeking reliable machinery without the complexity of additional features. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 2000 mm y-travel 2300 mm z-travel 1000 mm Control Siemens 840 D total power requirement 153 kVA weight of the machine ca. 67,0 t dimensions of the machine ca. 9,0 x 7,5 x 5,1 m Additional information Used universal machining center for turning, drilling and milling. Large machine in portal design with fixed portal and movable base with integrated rotary table / turning station and pallet holder. New price EUR 1.327.160,- (without service) The machine can be demonstrated and tested under power/chip. Technical data: Control: Siemens 840 D Max. workpiece diameter: 2000 mm Distance spindle nose to pallet surface min. 150 / max. 1120 mm Pallet changer: 2-way pallet changer with set-up station, pallet buffer space and rotating pallet transfer station Pallet size Diameter 1250 x 200 mm and Diameter 1600 x 230 mm Pallet clamping surface designed with 12 star-shaped T-slots 22H9 Pallet center hole diameter 100 mm H6 Maximum permissible pallet load 3000 kg Rotating spindle speed range: 1 - 400 rpm Rotating spindle drive power: 70 kW Drilling and milling spindle: HV swivel head as B-axis by 90° freely programmable Water-cooled AC main drive as motor spindle Speed range of drilling and milling spindle: 1- 12000 rpm Drive power of drilling and milling spindle: 40 kW (S1-100%) Maximum spindle torque 137 Nm Hydraulic weight compensation for the spindle slide Spindle positioning per degree (M19) Main spindle bearing diameter 70 mm Cutting performance: Solid drilling diameter 50 mm in C45 Tapping M 42 in C45 Milling 400 cm³/min. in C45 Milling 3000 cm³/min. in aluminum Travel: X-axis: 2000 mm (cross slide travel) Y-axis: 2300 mm (longitudinal table travel) Z-axis: 1000 mm (spindle slide stroke) Carousel turning station with C-axis operation and holder for pallets with diameters of 1250 and 1600 mm Double main drive, each with an integrated water-cooled main drive motor and automatically switching gearbox with transmission ratio 1:4 Main drive 70 kW (S6-60%) Maximum speed 400 rpm. Maximum torque 25000 Nm Main bearing designed with 845 mm diameter axial bearing and 200 mm diameter radial bearing (2-way) Technical data C-axis drive: Dsbvrowhvaper S Uout Number of positions 360,000 Measuring system directly via ROD Positioning accuracy +/- 0.001° Repeatability accuracy +/- 0.0005° Maximum speed 15 rpm

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor Djbvrrswh U Tho S Ueut 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: good (used), Year of construction: 2014, Mfd. 2014 Cutting area X axis 1'800 mm Y axis 1'800 mm Z axis 1'210 mm A axis +/- 105 ° C axis 360 ° Spindle Main drive Spindle power 94 / 113 kW Spindle speed 12'000 min-1 Torque spindle max. 300 / 410 Nm DDT Spindle power 105 / 125 kW Spindle speed 3'000 min-1 Torque spindle max. 844 / 1'202 Nm Dsbvrevzb S Ser S Ujut DDT Spindle power 63 / 75 kW Spindle speed 14'000 min-1 Torque spindle max. 200 / 275 Nm NC Rotary table Dimension milling ø 1'400 x 1'200 mm Dimension turning ø 1'400 / ø 1'800 mm Max. Rotary diameter ø 1'900 / ø 2'200 mm Tool changer Tool changer, places 92 / 204 Max. tool length 600 mm Max. tool diameter 125 / 250 mm Control Heidenhain TCN640 Siemens 840D sl Pallet changer Machine weight ø 1'800 x 1'400 mm Machine weight ø 1'400 / ø 1'800 mm Max. load 4'500 kg Quantity pallets 2 / 3 / 4 / Machine specifications Machine weigth 42'000 kg Dimensions length x width x height 6'200 x 6'500 x 3'900 mm

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Duebvet Rg E Ssrr S Ust Type: Partner M300 A-1 Year of Manufacture: 1990 Control System: FANUC O-M Travel Ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid Traverse: 24 m/min Feed Rate up to 5 m/min Spindle: Ball Screw: 36 mm Diameter Feed Drives: FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main Spindle Revolutions: 100 – 6000 rpm Main Spindle Motor: AC 5.5 kW Main Spindle Taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Working end indicator with alarm light Magazine for 30 tools Operating hour indicator Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space required: 1,900 x 2,300 mm 080525ä

Condition: used, Year of construction: 2018, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Heidenhain TNC 640 spindle HSK A 63 kW turning speeds 15000 U/min table-size 1070x700 mm Tools changer 38 fach/tools Machine on 26.000 h Spindle hours 11.500 h internal coolant system feed 40 bar weight of the machine ca. 9,5 t 3-axis CNC machining center -Rigid clamping table 1070 x 700 mm -coolant device, -electr. heat compensation, Dujbsvzhcqovrr S Ust -electric manual control module, -Measuring probe -Tool breakage monitoring -chip washing gun

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand Heidenhain Model iTNC530 Dobvrr Ssun Azwj Ujut Main Drive Spindle speed range 18000 Tool taper HSK-A 63 Number of axis 5 Movement X-Axis Movement 670 mm Y-Axis Movement 830 mm Z-Axis Movement 600 mm This 5-axis POSmill H800 U was manufactured in 2014, featuring a universal machining center with a spindle speed of 18,000 rpm and a 96-slot HSK-A 63 tool changer. It includes a Heidenhain control panel iTNC530, kinematic module, and contour protection. Additional features like a chip conveyor, coolant pump, and USB port enhance its functionality. Buy this POSmill H800 U universal machining center. For more information about this universal machining center, please reach out to us. Application Types Milling

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Table Load: 8.000 kg Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 20 - 9.000 RPM Tool dimensions (with occupied adjacent spaces): 125 mm Rapid Travel X/Y/Z: 40.000 mm / min Weight Of The Machine Ca.: 35 t Dobjwh U Tbjvrr S Usut Numbers Of Pallets: 2 pallet change time: 60 s Further information: internal coolant supply