Used Measuring systems for sale (288)

Condition: excellent (used), Item: D-5465-Flowmeter-Endress+Hauser Promass F Transmitter with display. Second hand 2" Type 60SF50 Dob Hmb Ssh Nvx Sopecg Temp. max 200

Condition: like new (used), machine/vehicle number: ML170mm 1554142W, Dr. Johannes Heidenhain Glass scale ML170mm 1554142W LS903 IdNr. 20908102 Length measuring device Scale Dcjb Hmb Ssvakg Nepjg Manufacturer: Heidenhain Type: ML170mm 1554142W IdNr. 20908102 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. If you have any questions or would like to arrange a viewing, please contact us. Thank you for your interest.

Condition: used, Measuring range 16 mm Angle 60 ° Dcebewg Hp Es Hmb Spog weight 500 gr

Condition: excellent (used), RENISHAW Measuring System Package: ACR1 ⇒ Automatic changeover system for up to 8 probe modules. ACC2-2 ⇒ Communication between the CMM controller and the ACR1 changeover system. IS1-2 ⇒ Fully automated system for using multiple sensor types connected in parallel. PI7-2 ⇒ Signal processing from the TP7M strain gauge probe and standard touch probes. PI 200 ⇒ Interface for TP200 and standard touch probes. Dceb Hmb Sewg Du Eopjg TP200 (x2) ⇒ Probe module with strain gauge technology for high accuracy. TP7M (x4) ⇒ 25 mm diameter strain gauge probe with auto-mount. + MITUTOYO ⇒ Calibration ball Ø 19.9819 mm ceramic, with M8 thread

Condition: new, Year of construction: 2024, Z-axis travel: 420 mm Traverse X-axis: 200 mm Workpiece diameter: Max. 420 mm Workpiece length: Max. 400 mm Max. Snap gauge diameter: d = 100mm Workpiece holder: SK 50 Tool weight: Max. 10 kg Repeatability: +/- 0.002 mm, Display accuracy: 0.001 mm Concentricity: 0,005 mm Connected load: 230 V / 50 Hz Compressed air connection: approx. 6 bar Dimensions W x D x H: 1300 x 625 x 1600 mm Weight: approx. 200 kg colour: silver gray / anthracite Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The Zoller image processing saturn set incl. Camera system allows a fast and operator-independent measurement of any tool cutting edge. Accessories: ZOLLER measuring machine control »Pilot 4.0« Panel PC with 24 "multi-touch display. Industrial computer with Windows 10 64-bit operating system. Dcsb Hmbeq Scbus Spjg SK 50 high-precision spindle, concentricity 0.002 mm, spindle brake, 4 x 90 ° spindle indexing, Autofocus CNC drive in the C-axis for operator-independent cutting edge focusing and automatic Measurement of multi-edged tools Rotary encoder for high-precision position determination in the C-axis Software pilot 4, Monitor holder for ZOLLER measuring machine control, mouse and keyboard shelf. Under table system, Maintenance unit, Thermal label printer.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, type of input current: AC, input voltage: 240 V, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Features: o Loading ports for 6 and 8 inch wafers Dcob Hmbowgm Eaj Spjg o Internal handler, robot, and prealigner o 1x, 2x, 5x, 10x, 20x lenses o Internal barcode reader o Black/white inspection camera o Color review camera o Front-site and cluster-site computers (WIN7) o Software version 3.9.4.18

Condition: good (used), Item: D-7030-Foxboro Mass Flow Transmitter Djb Hmboh A Ha Ee Spocg Foxboro, Mass Flow Transmitter Complete with display and deaeration tank 2" Model CFT50 Max temperature 60 C

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: G130000001602881, Krohne Promass 7000 T50 - DN50 - Straight pipe - Full bore - Separate control panel Djb Hmbewhybqo Spscg The flow meter is tested and in good working condition.

Condition: excellent (used), Model: TCS-INC/Tahoe-024-001 The TAHOE system is a high-performance burn-in test system for testing high-performance semiconductor components. It is suitable for both high-power and low-power applications (digital and mixed-signal) and supports component power dissipation of up to 100 watts. Temperature Chamber: 24 slots in a common temperature zone. Temperature range: 25°C to 170°C. Each slot has individual active socket control. Chamber heat dissipation capacity: up to 12.5 kW. Power & I/O: Each slot (BIB – Burn-In Board) has: 12 power supplies with up to 54 A. 4 power supplies with up to 12 A. 160 bidirectional I/O channels. 4 analog channels and 2 LVDS channels. Measurement of voltage and current at the DUT (Device Under Test) as well as monitoring of DUT outputs ("Signs of Life"). Drivers and Monitoring: Each slot has its own driver board (1:1 configuration). Driver boards are hot-swappable. Support for dynamic stimuli and DUT monitoring via Sierra™ software. System Configurations: High Power (HP): Up to 100W power loss per DUT. Integrated cooling with refrigerant. Low Power (LP): Up to 20W power loss per DUT. Cooling with the chamber's ambient air. System Features: Windows 7, 64-bit operating system Computer-based system with network functionality System event logging System temperature logging Lot/batch history logging The INCAL Tahoe HP Burn-in System is a fully automated burn-in chamber Dcsb Hewdvwaomb Speg with control and monitoring functions. It is designed to continuously respond to system errors. The DUTs are controlled via power supply and test vectors. The system uses a configuration file to control all DUT test parameters, as well as to track project/lot numbers. It also links the serial numbers of the burn-in boards (BIBs) to information on DUT positions, defective or empty sockets, and calibration data. All anomalies and batch information, as well as special monitoring data, are stored and accessible via the main user interface. File information can be saved or loaded by the user. The system is especially designed for network use, to centrally store and access test data for current projects. The software configures the hardware parameters based on the installed equipment. A multi-level security system prevents unauthorized users from changing configurations or shutting down the system. Technical specifications: 12 programmable high-current power supplies (54A HP, 25A LP) 4 programmable low-current power supplies (max. 12A) 2 externally programmable bulk power supplies (max. 9A) Installation and operating data: Housing: Width 1350 mm, Depth 1330 mm, Height 2300 mm + 350 mm for the signal light Electrical requirements: Voltage: 400V / 3PH / 50HZ Minimum current: 30 amps Maximum fuse: 40 amps Heating capacity: 15.0 KW Temperature range: 25°C to 175°C Refrigerant system: R-404A Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) Further questions can be answered by contacting us. We will be happy to answer your questions over the phone.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: ORS012400228, nominal load: 2 kg, Point cloud laser survey equipment: New purchase date: 07/03/2024 Last calibration + certification: 07/03/2024 - 1 carrying case - 1 monopod Dcjb Hmb Sovmgbiopeg - 1 adapter - 1 battery - 1 support cradle - 1 cable - 1 data logger - 1 phone holder - FARO Connect + FARO Scene software (perpetual licenses) - Getting started training

Condition: used, height & diameter measuring device Dsbouyg Uao Hmb Spjcg

Condition: excellent (used), Year of construction: 2020, We don't get to use it in production, therefore the sale. Dcob Hmberq A Sxe Spog

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Secondhand size DN15 (1/2") Max. flow: 20m3/h Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Min. Temperature: -30 c/-22 f Year 2012 Dcjb Hsirfbwsmb Spsg Input 60 V max 0.125 A For more informations please contact us! From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: good (used), Keyence IM-7030T measuring projector with IM-7000 computer unit in good condition. Type: Height Gauge Head Image Sensor: 1", 6.6 Megapixels Display: 10.10.4", (XGA: 1024 × 768) Lens System: Dual Telecentric Lens Image-Based Measurement: Field of View: Standard Measurement Mode: 300 mm × 200 mm (4× R50) / Precision Measurement Mode: 225 × 125 mm Display Resolution: 0.1 µm Repeatability: Without Stage Shift: Standard Measurement Mode: ±1 µm / Precision Measurement Mode: ±0.5 µm With Stage Shift: Standard Measurement Mode: ±2 µm / Precision Measurement Mode: ±1.5 µm Measurement Accuracy (±2σ): Without Stage Shift: Standard Measurement Mode: ±5 µm*1 / Precision measurement mode: ±2 µm*2 With measuring stage shift: Standard measurement mode: ±(7 + 0.02 l) µm*3 / Precision measurement mode: ±(4 + 0.02 l) µm*4 Probe measurement: Measurable area (XY): 190 × 90 mm Maximum measuring depth: 30 mm Probe diameter: ø3 mm Probe force: 0.015 N Repeatability: ±2 µm*5 Measurement accuracy: ±(8 + 0.02 l) µm*6 Height measurement: Measurement range: 0 to 75 mm Probe force: 0.3 N Positioning accuracy (XY): ±0.2 mm*7 Display resolution: 1 µm Measurable area (XY): Standard measurement mode: 145 × 95 mm / Precision measurement mode: 107.5 × 95 mm Repeatability: ±2 µm*8 Measurement accuracy: ±7.5 µm*9 Interface: LAN / RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) / USB 3.1 (4 ports at the rear) / USB 2.0 Series A (2 ports at the front) External remote input: No-voltage input (with and without contact) External output: OK/NOK/FAIL/MEASUREMENT Photo-MOS output - Rated load 24 V DC, 0.5 A - ON resistance max. 50 mΩ Recording: 500 GB hard disk Illumination system: Transmitted light - Telecentric transmitted light illumination (green LED) Ring - Multi-angle illumination with four segments (electrical, white LED) / Low-angle illumination (directional focusing, electric, green LED) XY stage: Travel - 200 × 100 mm (electric) Maximum load: 7.5 kg Z-axis: Travel - 75 mm (electric) Power supply: Voltage - 100–240 VAC, 50/60 Hz Consumption: Max. 430 VA Environmental resistance: Ambient temperature - +10°C to 35°C Relative humidity: 20 to 80% (no condensation) Weight: Approx. 35 kg The device is fully functional. There is a scratch on the support plate (this can easily be replaced if necessary). Dcjb Hmbjwhqunj Speg #8370

Condition: good (used), Year of construction: 2020, machine/vehicle number: DSC21400A-1374-L, Information: with software and 1 small compressor (71 W) - (Hiblow, HP 80) Debjwha Nue Hmb Specg

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: 43051, warranty duration: 10 months, type of input current: AC, input voltage: 230 V, measuring range X-axis: 65 mm, measuring range Y-axis: 55 mm, V-CAD 60 2D Optical Measuring Device - Dr. Schneider Messtechnik Special Price: €6,900 This device was purchased for a project in June 2024 and is now available for sale. It is completely new and is stored in its own secure storage room. Special Price - Pick up on-site in 56133 Fachbach. Manufacturer's warranty until May 2025! Precision sapphire glass support for positioning the measuring objects. Measuring range: 65.5 x 55 Glass surface: 85 x 70 mm Support surface: 200 x 130 mm Workpiece weight: max. 5 kg Telecentric diode transmitted light illumination Switchable LED incident light illumination Measurement and evaluation software "SAPHIR QD" Windows-based user interface MMi = Multiple identical measurements MMd = Multiple different measurements Djb Hmb Souggi Iepscg Learning programming Graphical display CAD file Calculations / evaluations Reports / output / interface Digitization and BestFit 2D version Language for documents and software: German Voltage 220 V 5810000320 High-resolution camera 5 megapixels 3160003770 4-stage Zoom lens 5910000265 Microsoft Windows 10 IoT Enterprise 2019 5810000398 All-in-one PC, pre-installed and ready for use including measurement software Intuitive measurement made easy You've never achieved your measurement results so quickly and easily. Choose the single-field system of the V-CAD 60 (this covers a measuring range of up to 65 x 55 mm, without any table movement) or the larger version with a moving table (V-CAD 300), which offers a measuring volume of up to 300 x 200 mm and can also be used in fully automatic CNC operation. A wide variety of options for your 2D measurements are available. Decades of experience in building high-precision multi-sensor measuring machines have been incorporated into the development and construction of the V-CAD series. You can rely on it – Made by Schneider Messtechnik – Made in Germany – SIMPLY PRECISE!

Condition: used, Year of construction: 2003, Traverse X-axis: 200 mm Y-axis travel: 350 mm Deb Hmbsrxhz Te Spjcg Z-axis travel: 250 mm A-axis speed: 60 rpm Workpiece holder: ISO 50 Workpiece diameter: 3 - 200 mm Workpiece length: Max. 300 mm Workpiece weight: max. 40 kg Connected load: approx. 2kW (230 v / 50 Hz) Dimensions W x D x H: 1245 x 1900 x 1470 mm Weight: approx. 2400 kg colour: light gray RAL 7035 Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Accessories: Pneumatic workpiece clamping, Windows 7 PC + QCM 8.0 software VIALOGIC TIM Teach-In-Mode, software package 1 (cylindrical tools sharp edge, corner and full radius), software package 2 ( conical-spiral tools sharp edge, corner and full radius), Software VIALOGIC Viascan, QCM Network, LightControlDevice, Glass scales on the linear axes.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Dob Hmbjwc Sxde Spjcg Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: used, ZG2-WDC41, OMRON, profile sensor, L=210cm Model: ZG2-WDC41 Dcsb Hot Ig I Usmb Speg Condition: Used

Condition: new, Year of construction: 2008, Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The extensive and comprehensive software solution with intuitive graphical user guidance guides users quickly and safely to precise measurement results. Accessories: Upgrade to ZOLLER measuring device control »pilot 4.0« with 17” monitor, Autofocus/venturion 800, Rotary encoder (ROD=) for high-precision position determination, Tool inspection (incident image processing with centered LED lighting), High-precision spindle “ACE” concentricity 0.002 mm, Tool management standard, FORED 'manual measuring programs, 3 used attachment holders. Z-axis travel: 800 mm Traverse X-axis: 200 mm X axis travel: 200 mm Workpiece diameter: Max. 1000 mm workpiece length: Max. 800 mm Workpiece length: Max. 400 mm Max. snap gauge diameter: d = 200mm Max. Snap gauge diameter: d = 100mm Workpiece holder: SK 50 Tool weight: max. 10kg Repeatability: +/- 0.002mm, Display accuracy: 0.001mm Concentricity: 0,005 mm Connected load: 230 V / 50 Hz mass: about 600 kg Compressed air connection: approx. 6 bar Dimensions W x D x H: 2400 x 1650 x 2250 mm Weight: approx. 200 kg colour: silver gray / anthracite Dceb Hjv Sautemb Speg

Condition: used, ILD2210-20, optoNCDT 2200, Micro Epsilon Laser Triangulation Sensor System Model: ILD2210-20 Dcjb Hjq S Spdomb Spog Condition: Used

Condition: used, WML-1, Semilab Lifetime Tester with housing and capacitive sensor Dsb Hmb Ssq S Tm Tepecg Model: WML-1 Type: WML-1 Condition: Used

Condition: used, RfN WML-1 / WML 1 / WML1, Semilab Lifetime Tester Dcsb Hmbjq S Td Do Spsg Model: WML-1 Condition: Used

Condition: used, EL-FLOW Select F-201CV, Bronkhorst, mass flow controller, 300sccm/SiH4/V1.22i Model: EL-FLOW Select F-201CV Dcjb Hmoq S Ucaob Speg Condition: Used

Condition: used, EL-FLOW Select F-201CV, Bronkhorst, mass flow controller, 500sccm/SiH4/V1.22i Deb Hmb Ssq S Ub Iepecg Model: EL-FLOW Select F-201CV Condition: Used