Used Key for sale (5,669)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, This is a complete system manufactured by Key Technology in 2021 and has previously been used for grading sprouts. This is a high-capacity optical colour sorting system capable of processing up to 15 tonnes per hour, depending on product characteristics and quality requirements. Dcjdpezltgxefx Akhjk The system comprises of the following equipment: 1 x Elevator conveyor with blue flighted belt on fixed stainless-steel frame. Speed - Fixed. Infeed height - 750mm. Outfeed height - 3000mm. Power - 3 phase. Overall dimensions - 5500mm long x 850mm wide x 3600mm high. 1 x Vibratory shaker cleaner conveyor. Model – SH01-101652. Stroke 8, RPM – 980. Vibratory bed dimensions – 2500mm long x 800mm wide. Overall dimensions – 2700mm long x 950mm wide x 2600mm high. 1 x Optical colour grader sorter with pneumatic rejectors and HMI operator touchscreen control. Model - Tegra T01-101746. Electrical requirements – 400 V / 50 hz / 3 phase. Amps – 44.85 A. Overall dimensions – 2600mm long x 2100mm wide x 26002.1m wide 2.6m long 2.6m high. 1 x Vibratory feeder conveyor for off-take of waste product. Model - SH01-101651. Stroke 8, 18 HZ. Vibratory bed dimensions – 2500mm long x 950mm wide. Manufacturer - Key Technology.

Year of construction: 1991, condition: used, machine/vehicle number: 8984, Directly driven vibrating screen, equipped with 3 levels: - Upper level: 5 removable perforated sorting screens with a discharge chute for the oversize fraction on the right side. - Middle level: 5 removable perforated sorting screens with a discharge chute for the oversize fraction on the left side. - Lower level: a closed collection screen for the fine fraction that passes through all sorting stages, with discharge via an outlet at the bottom. Dodpfxozmf Taj Akhjck Includes 20 extra screens (a total of 30 screens with different perforations). Drive: 2 x unbalanced drive, 220 / 380 V, 50 Hz Width (pan internal): 1,000 mm Length (pan internal functional): 3,500 mm Material: Stainless steel

Year of construction: 1997, condition: used, machine/vehicle number: 5673, Directly driven vibratory feeder. The machine is equipped with two interchangeable screening decks, which are pneumatically tensioned/clamped. Below each deck is a separate discharge chute. Drive: 2x unbalanced motor, 230 / 400 V, 50 Hz Width (internal vibrating trough): 1,200 mm Length (functional vibrating trough): 4,750 mm Dcodozmfytopfx Akhok Material: Stainless steel

Year of construction: 2001, condition: used, Indirectly driven conveyor vibrator suitable for transporting food products. The vibrator is made entirely of stainless steel, with the exception of the drive units and spring leaves. Dcsdpfx Akezmfqrehok Vibrating pan width: approx. 850 mm Vibrating pan length: approx. 7,100 mm Drive: 2 x unbalanced motor

Year of construction: 1975, condition: good (used), 11 rolls, Ø 130 mm Djdpfodnztkex Akhjck strip width: max. 1.900 mm strip thickness: max. 10 mm

Condition: good (used), Stainless vibratory conveyor, internal dimensions 1800mm x 650mm, hopper height 1550mm, discharge height 850mm, 3Ph Dsdpsfhdwajfx Akhjck

Year of construction: 2011, condition: excellent (used), Key Choc Chocolate Moulding Tempering Machine Bench Top Machine Model MM15 Year 2011 Capacity 15kg In everyday use at present Dcedpfxenxkc Rs Akhok

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Dsdpswnxupjfx Akheck Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: new, REP. Direct access key module, PROFIBUS-DP 6FC5247-0AF11-0AA0 0.60000442 00076 # Dsdpfx Aozr T T Sskhock SIEMENS

Condition: used, Weinig key switch with a sturdy base and cable. Dcedpfx Aszrxrmjkhok Technical data: - Available: 2

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Key bar chuck: without clamping jaws -Chuck size: Ø 290 mm -Bolt circle: 170 x 21 mm Djdpfexc Hfpex Akhjck -Through hole: 80 mm -Dimensions total: Ø 290 x 91 mm -Weight: 33.4 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws Dedjwucrrspfx Akhsck -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm Dsdpfjfth Sbox Akhock -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Condition: used, key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 195 mm -Kurzkegek 5 Dcsdpfx Akob Iwrlohek -Cone mount: Ø 48 mm -Hole circle diameter: Ø 105 mm -interchangeable jaws -Weight: 18 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Quantity: 1 piece available Dcodpfx Akedvdv Eehok -Price: per piece -Weight: 60 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Djdpfx Akogp Tm Sjhjck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Reishauer, wedge bar chuck Chuck size: Ø 165 mm -Recess mounting: Ø 268 mm Dcodpfswn Eaxsx Akhsk -Bolt circle: Ø 140 mm -Through hole: Ø 40 mm -Dimension: Ø 165 x 120 mm -Weight: 11.7 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Dedpfx Akov Tlrysheck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: used, Three-jaw chuck key, three-jaw lathe chuck -square size: 17 mm -Sleeve: Ø 38 mm -Number: 2x available -Price: per piece -Weight: 2 kg/piece Dsdpfxsd Erwce Akhsck

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” EKS key interlock Ethernet 100401 EUCHNER Dodszh Au Ropfx Akhock

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” EKS key interlock EKS-A-IIX-G01-ST02/03 (106305) Dcedpjzh Auqefx Akhek EUCHNER

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Quantity: 2 available Dsdpfozg Igvex Akhsck EKS key interlock EKS-A-IIXA-G01-ST02/03/04 (106306) EUCHNER

Condition: excellent (used), Keyway milling machine Manufacturer: Busch Type: NF1 Year of manufacture: 1984 4 spindle speeds from 380 - 1500 rpm. Motor: 380 Volts Dcsdpfxezdt Hpj Akhek Table surface: 600 x 250 mm Spindle motor: 380 Volts Power: 1.1 kW Weight: 780 kg Dimensions: Height with pallet: 1860 mm Width: 1300 mm Depth: 950 mm

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 160-300, Selling a used Union Bielefeld Flutemaster UF 5.2 CNC milling machine. Dcjdpfx Ajzkp Ebekhek Year of manufacture: 1990. Condition: used, see pictures. Inspection and collection possible by arrangement. The buyer bears the costs and responsibility for disassembly/loading and transport. If interested, please send a price inquiry.

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm Dcedpfx Aou Ndhiokhjk distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *