Condition: excellent (used), Here we offer you Thermotron temperature chamber. Cgobeixtitj Hb Tucot Water cooled Thermotron temperature chamber SE-1000-6-6 Inner dimensions: WxDxH 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to 180ºC Heating up total : ca 4,1 K Cooling down total : ca 1,2 K Heating power in ºC/minute -65º to 71ºC: 6.8ºC Heating power in ºC/minute -65º to 180ºC: 5.6ºC Heating capacity in ºC/minute -40º to 85ºC: 6.5ºC Cooling capacity in ºC/minute 85º to -40ºC: 4.7ºC Cooling capacity in ºC/minute 71º to -65ºC: 3.7ºC Cooling capacity in ºC/minute 180º to -65ºC: 4.3ºC External dimensions - WxDxH: 1250 x 1900 x 2200 mm Electrical requirements 400V/5P/N/PE 35 A Refrigerants: R508B and R404 A Approx. weight: 900 kg Type: Thermotron SE- 1000-6-6 For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Cgsb Hbok E Htys Tucet Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch climatic test chamber Here we offer a Heraeus Vötsch climatic test chamber. Heraeus Vötsch climatic test chamber with humidity (water cooled) Test chamber dimensions: Width 800 mm x depth 800 mm x height 950 mm Housing dimensions: Width 1090 mm x depth 1960 mm x height 1995 mm Characteristic values for temperature tests: Temperature range: -45°C to +180°C temporal ± 0.1 to ± 0.5 K spatially ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 heating: 4.0 K/min cooling: 3.0 K/min Characteristic values for climatic tests: Temperature range: -45°C to +180°C Temperature deviation in steady state, according to IEC 60068-3-5 depending on test room temperature Temperature range: - 10°C to +95°C temporal ± 0.1 to ± 0.3 K spatially ± 0.5 to ± 1.0 K Humidity range: 10 % to 98 % r. h. Humidity deviation temporal +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7,8 kW Rated current: 15,0 A Refrigerant R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.Condition: gebraucht / usedScope of delivery: (See picture) Condition: used / used Scope of delivery: (See picture) Cgob Hbomt Du Tj Tucjt (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer a Heraeus Vötsch temperature test chamber. Air cooled 1 feedthrough, NW 80 mm, test chamber volume 210 liters Temperature range -70°C to +180°C Cgeb Hb Tjnfu Afeucst Temperature deviation in time ± 0.2 to ± 0.5 K Temperature deviation spatial ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min temperature change rate cooling 2,5 K/min max. heat compensation 800 W Test chamber dimensions: Width 560 mm Depth 570 mm Height 630 mm Outer dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50Hz Rated power ca 1,8 kW Rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg Type: VT 7021 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch climatic test chamber Here we offer Heraeus Vötsch climatic test chamber. Designation VC³ 0100 Test chamber dimensions: H x W x D, approx. 950 x 1100 x 950 mm TEMPERATURE TESTS: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W CLIMATIC TESTS: Cgsben Ard Sj Hb Tucet Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.6 kW Nominal current: 12 A Refrigerant: R 404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Type: VC³ 0100 / year of construction 2013 Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a temperature test cabinet. Water cooled Technical performance data: Temperature working range Temperature range in °C -70 / +180°C Rate of change according to DIN 50 011, part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions height, approx. 750 mm, width, approx. 650 mm, depth, approx. 720 mm External dimensions height, approx. 1800 mm, width, approx. 850 mm, depth, approx. 1640 mm Operating data: Electrical connection 400 V, 3/N, 50 Hz. nominal power 13,3 kW Refrigerant: R404A / R23 Weight: approx. 650 Kg Cgeb Hjn Sl T Sjb Tucet Type: TS-70/350 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature -100 to + 200°C Table in lower position (WxDxH) 889 x 889 x 889 mm Table in upper position (WxDxH) 889 x 889 x 635 mm Overall dimensions (WxDxH) 1425 x 1748 x 2134 mm Work table 762 x 762 mm Max load 145 kg Acceleration 5 to 75 gRMS Voltage 480 or 440 V / 60 A / 3F 400 or 380 V / 80 A / 3F Cgob Hbjqwybgs Tucst Type: Qualmark T2.5 + compressor 99480630 Condition: used Only 147 hours Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: good (used), CTS climatic test chamber Here we offer a CTS climatic test chamber. Climate test chamber type: CS-70/1850-5 water-cooled 1) C means: Climate 2) S means: stress screening 3) -70 means: lower temperature -70°C 4) 1850 means: 1850 liter test chamber volume 5) 5 means: Temperature change rate of 5 K/min according to IEC 60068-3-5 Test chamber lighting: Halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -70°C to +180°C Temperature deviation ≤ ± 0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 5 K/min Cooling 5 K/min Heat radiation: approx. 5500 W at +20°C approx. 5500 W at ± 0°C approx. 3700 W at -40°C Climatic tests: Temperature range +10°C to +95°C Humidity range 10% to 98% rel. humidity Dew point range I: +7°C to 94°C Dew point range II (deep dehumidification): -10°C to +7°C Temperature deviation ≤ ± 0.3 K in time Humidity deviation I ≤ ±1.5% r.h. over time Humidity deviation II ≤ ±3 % r.h. over time Dimensions: Test volume 1850 liters Test chamber dimensions: Height 1085 mm Width 1470 mm Depth 1400 mm External dimensions: Height 2210 mm Width 1600 mm Depth 2645 mm Insert grid: Stainless steel, support surface 1300 x 1170 mm Max. load per shelf 35 kg Total load with max. grate load 100 kg 1a Pipe feed-through NW 50 1b Pipe feed-through 2x NW 125 2 Control panel 3 Window 570x710 4 Electrical connection, fixed 5 Pressure equalization 7 Test chamber drain and air conditioning system R 1/2 "i 8 Demineralized water inlet R 1/2 "i 9 Cooling water return R 3/4 "i 10 Cooling water inlet R 3/4 "i 11 Main switch 12 Electrical compartment 13 Compressed air R 1/4 "AG, option 14 Cable bushing for interface connections Technical version: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/ R23 Compressor: 4EC-4.2Y / 4CC-6.2Y Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Rated output: 33 kW Rated current: 41.3 A Protection class: IP 22 Weight: approx. 1300 kg Type: CS-70/1850-5 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant Cgob Heqzgwusb Tucet 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VCL 4006 Vötsch temperature and climate test chamber, air-cooled 32 bit S!MPAC* control with touch panel Potential-free contact for test material switch-off Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system TCP/IP interface Large observation window Test room lighting 1 pipe feed-through 50 mm 2 insertion grilles Air-cooled cooling circuit Humidification bath Calibration of 2 temperature values and 2 humidity values Test chamber capacity 64 liters Performance for temperature tests -40 to + 180°C Temperature deviation temporal ±0.3 to ±1.0 K Temperature homogeneity in space ±0.5 to ±2.0 K Rate of change Heating 3.5 K/min Cooling 5.0 K/min Heat compensation max.800 W Temperature calibration value +23 °C and +80 °C Performance for climate tests VCL Temperature range +10 to +95 °C Humidity range 10 to 95%r.H. Humidity deviation over time ±1 to ±3 %RH Csb Hbou Spxle Tucsgt Temperature deviation temporal ±0.3 to ±0.5 K Temperature homogeneity in space ±0.5 to ±1.5 K Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: Width 760 mm Depth 980 mm Height 1070 mm Sound pressure level: 56 dB(A) Nominal power, max. 1.8 kW Rated current: 8.0 A Electrical connection: 1/N/PE AC 230 V ±10 %, 50 Hz Refrigerant: R 404A Weight: 235 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Cjb Hb Tuevccwlecjgt Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Cooling: approx. 0.5 K/min. Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: WT3-1000/40 Weiss Temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm External dimensions: Height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 4500 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A Rated power 11.5 kW On-site fuse 32 A slow-blow Cgob Hb Tsthhw Aeucet Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-404A Weight: 840 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TSS-70/130 CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Cgob Hstql H Aob Tucst Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: Cgeb Hetr Dinob Tucjt 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 24 KW Rated current: 42 A Refrigerant: R-404A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Cgebetz Rl Ds Hb Tucst Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Ceb Hb Tusudvg Rjcogt Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer a Binder growth cabinet incubator. Temperature range: 0°C to 100°C 1 stainless steel rack MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections Inner glass door Control of several time and temperature display functions Digital tuning air turbine Without harming the environment Refrigerant R134A Technical data: External dimensions max WxHxD (mm) 1034x1142x746 Internal dimensions WxHxD (mm) 800x600x500 Volume (l) 240 Max. Load (kg) 70 Type KB 240 Condition: gebraucht / used Scope of delivery: (see picture) Cgjb Hbodrv Sdo Tucst (Changes and errors in the technical data are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), MMM Incubator Climacell Here we offer a MMM Incubator Climacell. MMM Incubator Climacell incubator Volume 707 liters Working temperature from 0.0°C to 99.9°C (no humidity) Internal dimensions: Depth: 50 cm Width: 94 cm Height: 140 cm from 10°C to 90.0°C (with humidity) Csb Hb Tusd Hyh Tjcegt Relative humidity 10-95 Temperature range: 99°C Connection: 230V 50/60Hz Power consumption 3440W Type: Climacell 707 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a bird heat cabinet with nitrogen supply. Vötsch heat cabinet with nitrogen supply Nominal temperature: 250°C Name stream: 10 A Connection value: 6.3 KVA Nominal voltage: 400V3coma N)PE AC 50/60hz Nominal power: 6 KW Type: TU 60/60 G-ISO Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you. Ceb Hbsd Ngg Te Tucegt

Condition: good (used), Here we offer you a vibration test system.Test Manager SWR 900Control cabinet SWS 200-10Vibration exciter SW 1508/1Hydraulic supply SWT 1110/11Power amplifier TGA sound insulation housing SWG 211/1Fan SWG 103Operating hours: approx. 1,300 hoursCondition: used / usedScope of delivery: Vibration test system as shown(Changes and errors in the technical data, specifications reserved!)We are happy to answer further questions for you on the phone. Cgsb Hb Tjd Tp Ausucet

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. Outer dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 l Voltage 230 V 1/N 50 Hz Rated current 37A Fuses 250 V , 2 x 3 A Type: EHS-221MD Temperature range: + 105°C to + 142.9°C Cgob Hbspdm Uyj Tucjt Humidity range 75 to 100 % r.H. Temperature constancy: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heat-up or pressure build-up time: from 0 to 2.0 kg/cm² in about 60 minutes 390 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren The chamber can be disassembled into 3 parts for transportation (screwed together) Temperature range: -30°C to +100°C Refrigerant: 20kg R-404A+20kg R-452A External dimensions: approx. width 3920 mm depth 7350 mm height 2600 mm Test chamber dimensions: approx. width 3500 mm depth 5400 mm height 2110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE Current: 135A Type: KKM 40 / 45 S Further technical data will follow! The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Ceb Hb Toqw U Aaeucogt Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Cgjb Hbsrkm U Uj Tucst Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2019, Instron Type: Instron Model 5982 floor model (extra height) The system has only been used a little. The furnace shown is unused and was built in 2021. Universal mechanical testing machine INSTRON 5982 from 06/2019 with lots of accessories. Applications: Determination of mechanical properties of materials such as: tensile, compressive, bending, shear strength, etc. Elastic modulus, shear modulus, elongation and hysteresis, fracture toughness Technical data: Measuring range: 100 kN Accuracy and resolution of the load cell: < 0.5 N, linearity – < 0.03%, hysteresis: ± 0.002% nominal load Crosshead displacement sensitivity: 0.001 mm (internal) Position control resolution: 9 nm Overload capacity: approx. 120% nominal load Display: via PC with Bluehill software + independent controller Measurement frequency: up to 0.1 Hz to 1 kHz Displacement speed: Under load: 0.001–1000 mm/min, without load: 0.001 –1100 mm/min Max. crosshead travel: 1000 mm Climate chamber for Tensile Testing: Chamber for Soil Model System 3119-617 Temperature Rating -80°C to 350°C Cooling option required to achieve sub-ambient temperatures. Internal Dimensions 400mm x 400mm x 660mm External Dimensions 550mm x 910mm Measurement Technology AVE 2 2663-901 Ceb Hb Tuevhbllscogt AVE 2 The second generation advanced video extensometer (AVE 2, catalog number 2663-901) uses patented measurement technology in the fastest, most accurate, non-contact strain measurement device on the market. The fully integrated device is easily adapted to the normal environmental conditions in your laboratory as well as to any test device on the market. Description: Configuration E2-F1-G1 Capacity 100 kN Measuring cell series 2580-100 Equipped with 2x product clamps up to 100 kN Width between the columns 575 mm Height of the columns 1930 mm Overall dimensions; width 1130 mm height 2770 mm Movable traverse Adjustable limit switches Wired digital control console Touchscreen PC Instron Bluehill software 240 volts 47-63 Hz 3500 VA 20 amp Own weight 898 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Memmert precision incubator. Memmert precision incubator 749 litres ICP appliances with powerful CFC-free refrigeration units with automatic hot gas defrosting hot gas defrosting device and motorised air circulation in the interior Electronic fuzzy supported PID - process controller with permanent power adjustment and a time-saving self-diagnosis system for fast fault finding Language setting Alphanumeric text display Internal log memory with 1024kB for the storage of actual temperature, set temperature, and error states with time stamp Control of the unit and logging of actual values on MEMoryCard XL Program sequence control for up to 40 ramp segments Adjustable air turbine from 10%-100% (ICP units only) Integrated weekly timer with group function (e.g. all working days) Cgjb Hb Tsg If Hueucjt Retractable push/turn control for easy operation of the unit Optical alarm display Model ICP 800 Interior: Width 1040 mm Height 1200 mm Depth 600 mm External dimensions: Width 1198 mm Height 1895 mm Appliance depth 756 mm Interior volume 749 litres Power 1200 W max. number of insertable trays 14 / 12 max. load per insertion tray 30 kg max. load per appliance 160 kg Setting temperature range ICP 800 -12°C to 60°C Setting accuracy 0.1°C Working temperature range ICP 800 -12° to 60°C Weight 227 kg Type: ICP 800 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!)

Condition: defective spare-parts repository (used), Oxford Instruments Here we offer you an X-ray fluorescence analysis. Can analyse thickness and/or composition of coatings Up to 15 elements simultaneously Dimensions: W 1450 mm x D 1450 mm x H 900 mm Weight: approx. 185 kg Type: X-Strata 960 Cgob Hb Tehaapfsucot Condition: Only to be used as spare part dispenser Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.