Used other measuring & testing equipment for sale (171)

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Item no.: 50122897 Hnjdpfxoy Suype Ad Rol

Condition: used, LEUZE CML720i-T05-1600.R-M12 Light curtain Transmitter Item no.: 50119468 Hnsdpey Sut Asfx Ad Rsl

Condition: used, HEIDENHAIN LB 302 - glass scale Total = 1x LB 302 4640mm 2x LB 302 ML 2000mm 2x LB 302 ML 320mm Hnedpfx Adoy Sulrs Rsl

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 Hjdpfx Aox A Imzed Renl For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Hedpfx Adjuwkr De Rsnl Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: As-new PLANOLITH surface plate, DIN 876/1 Year of manufacture: 20020 With original stand Dimensions: 1500 x 1000 x 400 mm Hnodpfx Adjy R Racs Rel Weight: 1100 kg Price: EUR 1,250 plus VAT, ex location.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). Hnedey Sl Uqopfx Ad Rol The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: used, Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display Screen diameter: 500 mm Enlargement: 50 and 100 times Swivel range of the upper table: +/- 2 mm Connected load approx.: 230 V / 50 Hz Dimensions W x D x H approx.: 1200 x 700 x 1800 mm Weight approx.: 400 kg colour: Light grey Hnedpfx Adownnwgs Rsl

Condition: excellent (used), Professional measuring device from the renowned manufacturer TECHKON on offer – model SpectroPlate. The equipment is intended for quality control of printing plates in the printing industry. Key Information: Manufacturer: Techkon GmbH (Germany) Model: SpectroPlate A801070 Type: Densitometer / printing plate measuring device Application: quality control, exposure and CTP plate parameter measurement Power: power supply included Hedpey Iligofx Ad Ronl Condition: used, fully functional Equipment Included: Techkon SpectroPlate meter original power supply all items as shown in the photos Condition: The device has been used and exhibits normal signs of wear, but it is in good condition and ready for operation.

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 37022, We offer this as-new Tagarno ZIP Microscope + LCD Monitor, year of manufacture 2021. Manufacturer: Tagarno Model: ZIP Year of manufacture: 2021 Condition: as new Category ID: 689 Type: Microscope + LCD Monitor Professional digital inspection system for quality control and PCB assembly. Hnjdpfxjym Sule Ad Rsl A high-quality digital microscope, TAGARNO model ZIP, is for sale. This device is ideal for precise inspection, repair, and documentation in electronics manufacturing or precision engineering. Technical details and highlights: * Resolution: Full HD (1080p / 60fps) for sharp, lag-free imaging. * Zoom: 30x optical zoom (plus digital zoom). * Working distance: Large clearance under the camera (approx. 250 mm), ideal for soldering. * Interface: HDMI output for direct monitor connection (no PC required). * Condition: Technically and visually perfect, very low operating hours. Scope of delivery: * TAGARNO ZIP camera head * Original TAGARNO stand / frame (column) * Power supply unit and HDMI cable Several units available / quantity discount possible for bulk purchase. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Hedjytr Swepfx Ad Rsnl Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), functionality: fully functional, We offer this solid granite plate for sale as a surface plate or for similar purposes. Transportation can be arranged or handled for an additional fee. Self-collection is possible at any time. Hnedeymmckepfx Ad Rsl

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Hjdpfx Adoy Rqiwe Renl Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Hnedpfx Adjmza Ils Rol Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Hnsdomx Sl Tepfx Ad Rjl

Condition: not inspected (used), functionality: unexamined, total length: 700 mm, total width: 500 mm, total height: 1,000 mm, table length: 350 mm, table width: 150 mm, machine/vehicle number: 580235, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Table dimensions: 350 mm x 150 mm Projector diameter: 300 mm Magnification: 10x MACHINE DETAILS Hsdpfxey D T Ice Ad Rsnl Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 1,000 mm Machine weight: 200 kg EQUIPMENT Three digital calipers External reference: 57

Year of construction: 1990, condition: good (used), Offer 26136 Hjdpfx Aey Nldgod Renl Technical data: (non-binding) - Test panel for wall mounting with various testing devices - Required space: W 600 x H 750 x D 300 mm - Weight: 40 kg

Year of construction: 1998, condition: ready for operation (used), Various old but fully functional measuring and testing devices from a grain laboratory are available. 1) Falling number measuring device Perten Falling Number 1402. 2) Sample cleaner A/S Rationel Kornservice Sample Cleaner MLN, weight: approx. 60kg. 3) Laboratory mill MIM 3100. 4) Hectoliter weight Louis Schopper with scale and weights. 5) Grain moisture meter Pfeuffer HOH Express HE 90, year of manufacture: 1998, measuring time: approx. 30s. 6) Laboratory mill Perten LM 3100. 7) Laboratory oven. 8) Calibration and temperature reference bath Fluke 7320 High-Precision-Bath, temperature range: -20°C/150°C, resolution: 0.01°C, bath dimensions X/Y/Z: approx. 170mm/90mm/230mm, volume: approx. 9l. Documentation available. An on-site inspection is possible. A package sale is preferred, however individual sale is possible. Hjdpsy Ey Thefx Ad Rsnl

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg Hedeyk Ahwspfx Ad Rjnl

Condition: new, For sale is a comprehensive package of subsea hydraulic components from manufacturer FES International (UK). ⸻ 📦 Included in the package: • 7x 8” Subsea Hydraulically Actuated Male Hot Stab • 2x API 17D Dual Port Hot Stab • 1x 1” Subsea Hot Stab • Original shipping crates ⸻ 📌 Condition: • Unused / stock item • Preserved and securely packed for transport • Note on packaging: Seals to be replaced ⸻ 📌 Technical details: • API 17D standard • Suitable for subsea / offshore / oil & gas applications • Compatible with ROV systems and hydraulic couplings ⸻ 📌 Fields of application: • Offshore service & maintenance • Subsea hydraulic systems • Spare parts for existing installations Hodpfx Adjy Dixdj Rsnl

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Fully functional. Display without any damage. Complete set as shown in the photos. Included: Hedpeyc Rwdefx Ad Ronl – SJ-210 measurement unit – standard drive attachment – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Hjdoyc Ru Aepfx Ad Rsnl Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics

Condition: excellent (used), Tripod height adjustable Hnodpod Ey Abofx Ad Rel Tightening thread: 1/2 Weight: 5 kg incl. carrying strap

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Hnjdpfx Adsd Ecnco Rjl Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Hnjdey Ax Thspfx Ad Rsl