Used mixing machines for sale (89)

Condition: good (used), WAM mixer, paddle mixer Manufacturer: WAM Lasdsxnkghspfx Anceg Type: WBHX1200M/0CK Completely constructed from stainless steel Motor power: 15 kW Mixing shaft speed: 111 rpm Equipped with a completely new drive system (electric motor, gearbox, belt drive, shaft coupling, stainless steel motor base) Fitted with a new pneumatic actuator for discharge flap opening Various electrical components present (excluding control cabinet) Mixing capacity: liters See our other listings VMA Wekerom

Condition: used, Lintmenger ribbon blender Manufacturer: Morton Capacity: 500 liters Ljdjxnkk Hjpfx Anceag Motor power: 7.5 kW, 49 rpm Material: Steel See our other advertisements VMA Wekerom

Condition: used, Lintmenger ribbon blender mixer Manufacturer: Morton Lsdpfx Ajxnkhxoncoag Capacity: 1000 liters Motor power: 11 kW, 44 rpm Material: Steel See our other listings VMA Wekerom

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Manufacturer: Pendraulik-Ruhrwerk Lasdpjxp Hw Eofx Ancjg Model: LD-50 Max 8,400 rpm

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Lsdoyba Szspfx Ancoag

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Lodpfx Anext E Iqocsag Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge - Connection for external compressed air supply - Ventilation device - Cleaning wash nozzles

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Process Control & Monitoring: Lodpfoy D Rq Uex Ancjag All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation.

Condition: excellent (used), Year of construction: 1988, manufacturer: LÖDIGE year of construction: 1988 Lasdpfxorywvdj Ancsg type: FKM 4200 D e-engine: 75 kW Siemens

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Ledpfoy Eyv Asx Ancsag Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Lodpfx Anezabnzecjag Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Lasdey Txfxopfx Anceg Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Good working condition. Please check out our other listings as well. Laodpfx Asylwcxjncjg

Condition: good (used), Infinitely variable speed control from 0-300 rpm Digital display Orbital diameter 30 mm Ideal for vessels with a volume of more than 250 ml, e.g. round flasks, Erlenmeyer flasks, culture flasks and bottles Ideal for biological and microbiological growth tests and for production of stock solutions Continuous operation (endless) even under extreme loads Timer function In good operating condition, images form part of the description. Specification: Lajdpfxjylwnuo Anceg Amplitude: 30mm Speed max: 300rpm Load capacity: 15kg Dimensions: 51 x 59 x 12cm (w x d x h) Weight: 26kg Electric supply: 240V 50/60Hz

Year of construction: 1981, condition: excellent (used), functionality: fully functional, loading space volume: 4.5 m³, machine/vehicle number: 50431, High-capacity industrial mixer with heating jacket and explosion-proof motor. Manufacturer: Draiswerke GmbH (Germany) Model: S-4500 Year: 1981 Total Volume: 4500 Liters Jacket Volume: 270 Liters (Heating/Cooling) Operating Temp: Max 150°C Jacket Pressure: 3 bar Motor: 30 kW AEG (Explosion-Proof / Ex-rated) Laodpfjyy Sztsx Ancjg Power: 380V / 50Hz / 1480 RPM Key Features: Horizontal Jacketed Design: Suitable for steam heating or water cooling. Robust Build: Designed for powders, granules, and heavy industrial pastes. Included: Industrial reduction gearbox, access platform, and stairs. Condition: Used, functional, high-quality German engineering.