Used other metal processing machinery for sale (534)

Year of construction: 1989, condition: used, functionality: fully functional, Lot of used machine tools TRANSPORT TO BE AGREED UPON DURING PURCHASE or QUOTATION: -MT180 TRI-PHASE LATHE -INGERS 175 tri-phase LATHE -LEGOR 300 tri-phase -ANSELMI 180 tri-phase LATHE -Idroming 600 (DRM) - GRINDING MACHINE Gbedpfx Agozg E Hyolsp -BERGONZI FS 870 RADIAL DRILLING MACHINE -FRESA Prvomajska 1 -FRESA Prvomajska 2 -SERRMAC RAG 25/L tri-phase COLUMN DRILLING MACHINE -ITALERI Tri-phase COLUMN DRILLING MACHINE -BIMARK MOD. 30 Tri-phase COLUMN DRILLING MACHINE -Fratelli Rosa Milano tri-phase COLUMN DRILLING MACHINE -Mola Salmoiraghi tri-phase Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any information, please do not hesitate to contact us. Machines intended for countries outside the EU.

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Godozf Nb Espfx Aglsbp

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Gbsdpfey Uvgcjx Agljp Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: used, Serial No. 15-6139B, CNC control with touch display, indexing feed conveyor, robot by Yaskawa, type YR-MH00012-A00, year 2011, robot controller DX200, Teach-in terminal, box unloading section, L 7,000 mm, switch/control cabinets, plexiglass enclosure, peripheral units, machine accessories. Subject to prior sale. Gedpfey A In Uox Aglebp

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Subject to prior sale. Gbjdjy A Ih Uopfx Aglop

Condition: excellent (used), 2-Component Dosing System Manufacturer: Hilger & Kern Component A container size: 45 liters, with manual agitator Component B container size: 24 liters Year of manufacture: 1990 Includes mixing gun Transport dimensions: Gbsdpfx Ajy Udv Eogljp Length: 850 mm Width: 850 mm Height: 1600 mm, including pallet

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. Godpfxozcqnij Aglsbp 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Gbsdjzcqmxepfx Aglsp Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, A 4-axis CNC profile machining centre Emerald F260, year of manufacture 2019, sourced from a professional production environment. The machine is perfectly maintained, damage-free, and fully operational. Axes: X / Y / Z / A (4-axis interpolation) Control: PA8000 (Germany) Spindle: HSD (Italy) – 9 kW, up to 24,000 rpm A-axis rotation: +90° to -90° Working area: Up to 7000 mm length (depending on clamp configuration) Tool magazine: ISO30 – 9 positions Applications: Milling, Drilling, Tapping, Grooving, Angular machining Materials: Aluminium profiles, light alloys, UPVC Gbsdpex R U Eijfx Aglsp

Year of construction: 2005, condition: ready for operation (used), Machine tool manufactured in 2005. This KOMAX GAMMA 333 PC features a configuration with multiple MCI711 presses equipped with contact strip cutters and various feed options. It includes two 2-meter long conveyor belt extensions for efficient operation. If you are looking to get high-quality automation capabilities, consider the KOMAX GAMMA 333 PC machine we have for sale. Contact us for further details. • Machine configuration: Godpfoy Ukfaox Aglobp • Side 1: • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • 1x MCI711 press with contact strip cutter; Rear contact feed - passive; Side contact feed active - with paper strip winding • Side 2: • 1x MCI711 press with contact strip cutter; Rear contact feed - passive • Control software: TopWin 2.4.3.24 • Note: Machine sold without mini-applicators Additional equipment • Conveyor belt: 2x 2 meter long conveyor belt extensions

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Gbsdpfx Agjzd A Rdjljp Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: used, Descriptión: Machine type: AUTOMATIC Operating mode : MANUAL/AUTOMATIC Strain: 400 VOLT Frequency : 50 Hz Power adsorbed : 2 Kw Minimum nut dimensions : 1/2” Maximum nut dimensions: 1“ Minimum threading: 67-60 mm Maximum threading: 208 mm Supply pressure : 6-8 bar Cylinders: SMC Three-phase motors : Minimotor PLC: SIEMEMNS S7 Cycle time: 8.5 Seg. Gjdpfx Asy Tnarjgljbp Production changeover time(1 person): +/- 15 min. Maximum dimensions of the assembled delivery: 3900x2220x2400H mm Phonometry: 78 dBA

Condition: good (used), Year of construction: 2022, Offer 26145 Technical data: - Cutting range: 33 - 174 mm - Wall thicknesses up to: 5 mm - Equipped with a hard metal cutter - Central pipe clamping system via handwheel - Manual rotational drive / cutting drive - Height-adjustable saw unit - Drive: 220 V / 1200 watts - Space requirement: approx. W 900 x H 1000 x D 400 mm Gbjdezd An Aepfx Agljp - Weight: approx. 300 kg - 2 roller guides: 1500 mm

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB Gbsdpfxjyft Hae Agljp TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified Godpfx Aju Rnd Doglsbp On sale as is. *

Condition: excellent (used), We are selling the following: milling cutters, drills, reamers, boring tools, gauges, and more. Only as a complete set. Available for viewing in Most-Komořany, Czech Republic. Approximately 30,000 kg. Gedpfx Agjzff Dcslebp

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Godjxy R Ezspfx Aglsbp

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Gbodomqi Akjpfx Aglep

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. Gbedomqku Uspfx Aglep The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: ready for operation (used), functionality: fully functional, Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth Gsdpfxjyym S To Aglsbp

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: Gedpfx Agozfg Suelebp If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, We are offering this used Gesipa FireBird for sale; the year of manufacture is unknown. Gsdpfx Agezfg Ayeljbp If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Gbodpfsyman Hox Aglep Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Year of construction: 2025, condition: used, machine/vehicle number: 0799-250030, Stairs made of galvanized gratings: Gjdexbqdgspfx Aglsbp All steps with width 1020 mm, and step height 180 mm, 3 pieces with 4 steps 20 pieces with 3 steps without support 6 pieces with 3 steps with support all stairs are galvanized and in good condition

Condition: good (used), Year of construction: 2002, functionality: fully functional, Profile machining center, portal milling machine Type: MBZ 72/80-3 Year of manufacture: 2002 Gjdey S Hazepfx Aglobp Condition: used Technical data: x-axis: 7000mm y-axis: 1000mm z-axis: 370mm Spindle drive: 6.8KW Spindle speed: 20,000 RPM Tool holder: SK30 Pull stud: DIN 69872 Tool changer: 12 Special equipment/accessories: – Vögele central lubrication system – Niels minimum quantity lubrication system – Vacuum system with 8 clamping modules – 8 tool holders incl. tools – Workpiece probe incl. tool holder – Documentation