Used Presses for sale (25)

Condition: good (used), Year of construction: 1987, Functionality: fully functional, total width: 2,100 mm, total length: 2,600 mm, total height: 2,100 mm, heating capacity: 0.48 kW (0.65 HP), overall weight: 5,000 kg, Clamping unit - Heating capacity of the heating plate 0.48 kW per 1 heating rod 0.9 kW per 8 heating rods Cjln Hy Hjwg Dv Aepsrb - Pressure capacity 1,000 kN - Clamping cylinder approx. 260 mm - Closing force, rapid traverse approx. 2 x 500 kN Container dimensions (LxWxH) 430 x 600 x 1450 mm

Year of construction: 2013, Condition: used, Functionality: fully functional, In total I have purchased 7 molds. ; the molds are large - seat, backrest, backrest for the moving head. These are three molds for extrusion. Celowb Amcsn Hy Hpsrb The mold for the head is injection molded. I gave the mold and I was made to order on a machine if I'm not mistaken HAITIAN 500 tons, but the mold is large. This is the fourth mold. The fifth and sixth molds are for chair fittings. The seventh mold is a double mold for the seat and backrest. It's for polystyrene. The specifications for the molds are attached. Three types of seats. Seat 9-36 kg, Seat 9-36 with moving head and finally Booster. Seat 15-36 kg. The polystyrene seat- also used as Booster Seat 15-36 kg, mostly for cabs or at home for the child to sit at the table. So as you can see the molds worked actually very little.

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 97402, CHIESA SANSSON F1 PRESS FOR DIE CUT FORCE 60T. NEW BELT, FROM 2017 IS STORED IN THE WAREHOUSE USER MANUAL AVAILABLE Crelswff I Dsn Hy Hpeb

Year of construction: 2017, Condition: used, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m Coln Hysd E Irms Hperb draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

Condition: excellent (used), Year of construction: 2018, Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Possibility of assistance in organizing transport Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Possibility of assistance in organizing transport Atom HS588/3 CE Brückenschneidemaschine Druck 25 Tonnen Tischabmessungen: 1600 mm x 500 mm Hammerabmessungen: 500 mm x 500 mm Maximaler Hammerhub: 150 mm Cjln Hy Hov Skrcjperb Motorleistung 1.5 kW Einfache, intuitive Bedienung über ein SPS-Touchpanel Die Maschine ist wie NEU, in einwandfreiem technischen Zustand Vollständige Herstellerdokumentation zur Maschine Möglichkeit der Unterstützung bei der Organization des Transports

Year of construction: 1988, Condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 1988 and is in good condition, Brand: Collin Pilot & Lab Solutions Model: P300P Year of construction: 1988 Plate size: 296 x 296 mm Celn Hystuu Dwe Hpjrb Max. pressing force: 300 kN Max. operating temperature 300 °C

Condition: excellent (used), Year of construction: 2006, The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Dimensin ⇒ 2650 x 2100 x 2100 mm Clamping Force ⇒ 635 KN Croln Hyswg Dvvo Hpjb Working pressure ⇒ 206 bar Piston diameter ⇒ Ø200 mm Stroke ⇒ 140 mm Daylight ⇒ 150/180 mm Heating plant dimension ⇒ 250 x 300 mm Max. mass of heating plant ⇒ 70 kg Oil reservoir ⇒ 100 l Rated power ⇒ 19.66 kW Heater capacity ⇒ 9.6 kW Vacuum motor power ⇒ 2,6 kW Between light curtain and mould area ⇒ 270 mm Stroke of vacuum cover ⇒ 140 mm

Condition: used, Year of construction: 2004, Functionality: fully functional, pressing force: 40 t, opening height: 200 mm, cylinder stroke: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Total pressure output 400 kN Croln Hyevzwxus Hpeb Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Year of construction: 2018, Condition: ready for operation (used), A Pan Stone elastomer press is available. Press force: 2000kN, working height: 950mm, plate dimensions X/Y: 800mm/800mm, installation height min./max.: 54mm/400mm, clamping plate swivel: 60°, opening path: 800mm, clear width: 570mm. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/4200mm, control: B&R, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Cjln Hjvuagbjy Hpsrb

Year of construction: 2018, Condition: good (used), Pan Stone D V 500 PCD elastomer press, Year of manufacture 2018, Control B & R Touch Display 2018, Clamping force 5000 KN, Demolition max 800/300/300 mm, Clear width of lifting units 870 mm, Upper piston press, Crsln Hy Hovvlz Hspeb Clamping 800 x 800 mm, Magnetic clamping, Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Oil preheating,

Condition: excellent (used), Schon 6005 B hydraulic cutting machine with returning hammer Robust German manufacture Pressing force: 70 Ton Cjlnsrhik Ee Hy Hpjrb Working area: 2050mm x 850mm Max stroke: 160mm Weight: about 6500kg Machine in Perfect technical condition after full service Possibility of assistance in the organization of transport We invite you to our other auctions ! Cutting beam machine Schon 6005 B Solid German production Pressing force: 70 Tons Working area: 2050mm x 850mm Max stroke: 160mm Weight: approx. 6500 kg The machine is in perfect technical condition after full service Possibility of assistance in organizing transport We invite you to our other auctions !!! Schon 6005 B Brückenstanze Solide deutsche Produktion Presskraft: 70 Tonnen Arbeitsbereich: 2050 mm x 850 mm Maximaler Hub: 160 mm Gewicht: ca. 6500 kg Die Maschine befindet sich nach vollständiger Wartung in einem einwandfreien technischen Zustand Möglichkeit der Unterstützung bei der Organisation des Transports Wir laden Sie zu unseren anderen Auktionen ein!!!

Year of construction: 2001, Condition: excellent (used), This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and has a normal number of working hours for its age. – Brand: Collin Pilot & Lab Solutions – Model: P200P Csln Hyon Smghs Hporb – Year built: 2001

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force ⇒ 7,000 kN Operating pressure ⇒ 250 bar Specific pressing pressure ⇒ 610 N/cm² Number of levels ⇒ 2 Installation height with 75 mm heating plate & 20 mm insulating plate ⇒ approx. 2x 190 mm Piston stroke ⇒ approx. 400 mm Piston 1 diameter ⇒ 543 mm Clamping force, rapid traverse ⇒ approx. 2 x 85 kN Retraction force ⇒ approx. 2 x 47 kN Operating pressure ⇒ 300 bar Piston 2 diameter ⇒ 60/40 mm Stroke: 400 mm Estimated weight ⇒ approx. 16 tonnes Hydraulic System: Pressure adjustment ⇒ 40 - 300 bar Flow rate regulation ⇒ 0 - 99 % Flow rate l/min (HD) ⇒ 45 against 300 bar Drive power ⇒ 22 kW Tank dimensions (LxWxH) ⇒ 1000 x 770 x 535 mm Closing Speed: Colnjwg Dvij Hy Hpjrb Rapid traverse ⇒ approx. 40 - 50 mm/s Slow closing ⇒ approx. 0 - 20 mm/s Pressing speed ⇒ approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, We offer a fully functional stack press - 5 pressing chambers used for the production of PVC cutting boards. The press is heated by steam and cooled by water. We will be happy to provide further information. Crelevyrhujn Hy Hpeb

Year of construction: 1991, Condition: ready for operation (used), Pressing force: 180kN, total stroke: 250mm, power stroke: 12mm, max. compressed air supply: 6bar. Celeq Tqrfjn Hy Hpsrb

Condition: good (used), Year of construction: 2018, Pan Stone D V 200 PCD elastomer press, Year of manufacture 2018, Control B & R Control Touch Display, Clamping force 2000 KN Demolition max 800/300/300 mm, Clear width of lifting units 570 mm, Upper piston press, Clamping 800 x 800 mm, Magnetic clamping, Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Crjlevvly Nen Hy Hpeb Oil preheating,

Condition: refurbished (used), This mold carrier will be overhauled by Optitek GmbH according to customer requirements (!) or sold in its current condition. (see photos). Apart from the base frame, all parts will be renewed or overhauled. In addition to the hydraulic drive station, this also includes the control system and the visualization. We will implement your special wishes, from the colour design of the mould carrier to special visualization requirements and the design of the hydraulics - possibly also as servohydraulics - because (almost) anything is possible. Of course, the safety technology, such as light curtains with rear step protection and a safety fence system, are also designed according to your requirements. Some technical details: ===== " Clamping force: 600 kN " Clamping surface: 2,000 x 1,000 mm " Parallel stroke: 750 mm " Opening width: 1,350 mm " Machine dimensions: (L x W x H) 3,000 x 1,600 x 3,400 mm " Machine weight: approx. 8 tons " Electrical connected load: 45 kW Coln Hysud Slpj Hporb " Operating sides: One-sided or two-sided >> THE ADVERTISED PRICE APPLIES TO THE CURRENT CONDITION OF THE CARRIER, PLEASE CONTACT US !

Year of construction: 1990, Condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking. Cjln Hsn Sm Aysy Hpjrb

Year of construction: 2021, Condition: as good as new (ex-display), - Pressarea: 300 x 300 mm - Pressing force: max. 10 to ≙ 100 kN - Stroke/opening: 400 mm - Pressing speed (dyn.): 1 mm/sec - Travel speed: 20 mm/sec - Column guide: 4x Ø40 mm - Working height: 1,150 mm - Outer dimensions: L x W x H = 1,450 x 800 x 2,100 mm - Total weight: 1.500 kg - PWG spindle: 48x5 mm - SEW servo motor with SEW-FU 3 kW - 4x heating circuits with 16 A each, plug 230 V in the switch cabinet incl. integration into the press control system - PT100 plug for heating circuits - Light protection grille at the front - Rated voltage: 3/N/PE/ 400 volts / 50 Hz Coln Hoimv I Dsy Hpjrb - 34 A, 18 kW - SIMATIC HMI TP900 COMFORT Siemens - Year of manufacture: 2021 2 pcs. available

Condition: used, Functionality: fully functional, Enerpac MP-1000 F 3515BL Multifluid Hand Pump. Specifications: Superior corrosion resistance Impregnated aluminum anodized pump housing with stainless steel internal pumping components Standard Nitrile seals- excellent for demineralized water, oil/water emulsions, water glycols, mineral oils, hydraulic fluids Custom EPDM seals avaliable for use with Skydrol or brake fluids Two speed pumps up to 14,500 psi pressure Externally adjustable pressure relief valve 1/4" NPTF gauge port Maximum Operating Pressure (psi) 14,500 Pressure Rating (psi) 1st Stage 500 Pressure Rating (psi) 2nd Stage 14,500 Cylinder Compatability Single-acting Maximum Flow at Rated Pressure .12 in3/stroke Oil Displacement per Stroke (in3) 1st Stage Csln Hyottmnyj Hperb 3.2 Oil Displacement per Stroke (in3) 2nd Stage 0.12 Maximum Handle Effort (lbs) 99 Piston Stroke (in) 1.04 Valve Operation Manual Power Source Manual Weight (lbs) 14.5 Good working condition. Please check out our other listings as well.

Year of construction: 2018, Condition: ready for operation (used), A Pan Stone elastomer press is available. Press force: 5000kN, working height: 950mm, plate dimensions X/Y: 800mm/800mm, installation height min./max.: 54mm/400mm, clamping plate swivel: 60°, opening path: 800mm, clear width: 870mm. Machine dimensions X/Y/Z: approx. 2800mm/1700mm/4400mm, control: B&R, operating hours: approx. 5500h. Documentation available. On-site inspection is possible. Colnjvuaghj Hy Hperb

Condition: refurbished (used), Year of construction: 1995, This column form carrier will be overhauled by Optitek GmbH according to customer requirements (!) or sold in its current condition (see photos). In addition to the current condition, all parts will be renewed or overhauled by Optitek during the further general overhaul. In addition to the hydraulic drive station, this also includes the control system and the visualization. We will implement your special wishes, from the colour design of the mould carrier and special visualization requirements to the design of the hydraulics - possibly also as servo hydraulics - because (almost) anything is possible. Of course, the safety technology, such as light curtains with rear step protection and a safety fence system, are also designed according to your requirements. Some technical details: ===== " Closing force: 6,000 kN " Tear-open force: 600 kN " Clamping area: 2,030 x 1,530 mm (clear width between the columns) " Parallel stroke: 1,100 mm " Opening width: 1,900 mm " Machine dimensions: (L x W x H) 3,300 x 2,650 x 4,470 mm (closed) Croln Hy Hsud Skxopsb " Machine weight: approx. 50 tons " Electrical connected load: 45 kW " Operating sides: One-sided or two-sided >> THE ADVERTISED PRICE APPLIES TO THE CURRENT CONDITION OF THE CARRIER, PLEASE CONTACT US !

Year of construction: 1993, Condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm Crsln Hyjn Sm A So Hpeb control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2003, Condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Cjln Heivt R Asy Hperb

Year of construction: 2001, Condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Croln Hy Hsdwf Dbjpob