Condition: used, Sewing Machine Brehmer 39 3/4 S2 Fadenheftmaschine - Sewing Machine Brehmer 39 3/4 S2 Year 1964 - Serial-No. 64035 Size min. 120 x 70mm - max. 280 x 440mm 6 Stitching heads Dodpfx Ais Agp Apo Ejwd Speed max. 70 Stitching/min. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Antike Falzmaschine - Antique Folding Machine Guk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Dwedpfx As Agp Azsi Esd On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Xerox Versant 4100 Dodpfx Asychr Esi Eowd Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) Dwodpozhlr Esfx Ai Eod We will be happy to answer any further questions you may have by telephone.

Condition: used, English Type: German RepRap X1000 RepRap 3D printer The X1000 is a 3D printer for processing a wide variety of plastic materials, with an extra-large printing area and an optional dual extruder. With a layer thickness of up to 0.1 mm and a printing area of 1000x800x600 mm, this 3D printer can be used to produce both large models and multiple small objects with precision. An enclosed control cabinet, an emergency stop switch and an optional CO2-based dual fire protection system meet the requirements for safe operation in an industrial environment. Technical data: Description Data Printing area (X - Y - Z) 1000 x 800 x 600 mm Printing speed 10 - 150 mm/s Travel speed 10 - 300 mm/s Layer thickness (minimum) 0.1 mm (nozzle dependent) Filament/nozzle diameter (standard) 1.75 mm / 0.8 mm Material PLA, Performance PLA, Laywood, PVA, PET-G, TPU64D Extruder type DD3 Dual Extruder temperature (maximum) 290°C Data transfer LC touch display, wireless printing via WLAN, Ethernet Software Simplify3D software Power consumption 2500 W Operating voltage* Three-phase 400V (CEE 3L+N+PE) Ambient temperature 15-26° C External dimensions approx. (W x D x H) 1725 x 1500 x 1320 mm Dodpfx Aiezd Td Uj Eowd Weight approx. 400 kg Marking DIN 10218-2 Options Heated bed, dual extruder, dual CO2 fire protection system Available nozzles 0.4 / 0.6 mm Available nozzle material Brass, hardened steel Technology Fused Filament Fabrication (FFF) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Arburg Type: Arburg Freeformer 300-3X PC has been renewed and upgraded Additive manufacturing of complex functional components With high-temperature option The new, larger Freeformer 300-3X processes three components in ARBURG Kunststoff-Freiformen (AKF) and, for the first time worldwide, enables the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation 300 indicates the available component carrier area in square centimeters. The build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters compared to the Freeformer 200-3X. "3X" indicates the three axes of the component carrier that can move in the x, y, and z directions. For Additive Manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Dedpfx Aiszd Tiwo Eewd

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Dwjdpfszdywzox Ai Esd Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Dwsdpfx Aezd Tlloi Eod Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 3D systems Type: DT60 Printing volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in the Z-axis: 1.25 microns Precision in the X and Y axes: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available Nozzle diameters: 0.2 / 0.4 / 0.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dwedpfx Aezd Tugsi Eod Dual filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting the end of the filament Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale ex warehouse!) (Subject to changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Horizon Crossfolder AFC-564 AKT Year: 2015 Counter: 3,031,080 - cross folder AFC-564AKT Horizon AFC-564 AKT 4-buckles cross folder - parallelfold rollers condition: 0% - crossfold rollers condition: 10% - technology: touch & work - memory folding types: 17 standard-typs of fold preprogrammed - saveable jobs: 200 memories for repeat orders - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - knife: full automatic - sheet size: max. 560x760mm; min. 120x172mm - fold length: min. 58mm (1. buckle), all other buckles 35mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 40.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.700x1.050x1.650mm (without conveyor) - weight: 1.050kg Price under request Availability: Immediately ! Please ask for further detailed pictures ! Video available ! Dwedpfx As Agrgnji Eod

Condition: good (used), Polar Mohr PW-4 ABV Pile Turner Ready-to-use. This is one of the most powerful turner models on the market. Dwodpfs Agq Iljx Ai Ejd The machine features an aeration system, a shaking system, and a hydraulic lock for head rotation. Side margin. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 1600 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, small footprint.

Condition: used, Stratasys Type: Dimensio elite Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of Stratasys’ Design Series. The Dimension Elite printer is ideal for printing 3D prototypes and for modeling functional components, such as medical devices, mobile electronic devices, or precision instruments. With a simple click on “Print,” the CAD file is prepared and the printing process is started. After easily removing the soluble support material, a precise and detailed component is revealed. Manufacturer: Stratasys Type: Professional operation Material(s): ABS Technology: Fused Deposition Modeling Dedpfx Aszdnproi Eowd Installation: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Layer thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A on a dedicated circuit Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 1995, condition: good (used), machine/vehicle number: 2103, 2 Colours Quick Action Clamps Water Dampening Dwodpfx Asfuwmqji Esd Colour Rollers Water Rollers

Condition: good (used), Year of construction: 2014, machine/vehicle number: 39272, Max. Size : 375 x 660 mm Min. Size : 105 x 148 mm Paper Weights : 400 g/m2 Paper Weights Min. : 100 g/m2 Dodpfx Aisg Ngtpo Eowd

Year of construction: 1991, condition: good (used), machine/vehicle number: 44070/91-180102, 4 Pockets 1 Folding Knife Dsdpfxjg I I N Is Ai Ejwd

Condition: good (used), Complete used Tiflex textile screen printing setup for sale: a full manual screen printing line, ready to print t-shirts, sweatshirts, hoodies, polo shirts and garments with plastisol inks. This Tiflex screen printing equipment covers every step of the process: multi-colour printing on a 6-colour manual press, intermediate flash curing between colours, then final curing in an infrared conveyor dryer. A practical solution for textile decorators, garment printers, print shops, apparel brands and new screen printing workshops. 1. TIFLEX 2368000LC MANUAL SCREEN PRINTING PRESS (6 COLOUR, 6 STATION CAROUSEL) - Rotary manual press, 6 printheads and 6 stations - Maximum print area: 40 x 50 cm - Maximum outer screen frame size: 60 x 80 cm - Micro-registration with 3 knobs (X, Y and rotation) for accurate colour registration - Off-contact adjustment, screen/pallet parallelism and front/back pallet adjustment - Sliding pallets locked by ball plunger, rear screen clamping with anti-crush system - Pallet height: 86 cm, net weight: 200 kg - Fully manual, no electrical connection needed, dismantles for transport 2. 16 PALLETS INCLUDED (PLATENS) - 6 x men's XL pallets: 66 x 48 cm - 6 x women's M pallets: 50 x 32 cm - 2 x children's S pallets: 40 x 22 cm - 1 x sleeve pallet: 60 x 15 cm - 1 x sleeve pallet: 40 x 15 cm A complete pallet set for adult, youth and sleeve printing, with enough pallets to run all 6 stations in men's or women's sizes. 3. TIFLEX 40 x 40 CM INFRARED FLASH CURE UNIT (2008, VERY GOOD CONDITION) - Flash dryer for screen printing, 6 short-wave infrared emitters, 12 kW - Drying area: 40 x 40 cm - Drying timer and air-jet cooling timer - Automatic cycle start by contact rod when the pallet is detected - Half-power setting for delicate mesh - Height-adjustable stand on wheels - Three-phase 400 V, 18 A Dwodpfx Aie Agvmmj Esd - Ideal for flashing a white underbase on dark garments before printing bright colours 4. TIFLEX T-IR 80 INFRARED CONVEYOR DRYER (2008, GOOD CONDITION) - Infrared textile dryer / drying tunnel for curing plastisol inks - Useful belt width: 80 cm, length under heating element: 130 cm - Teflon glass conveyor belt resistant to 250 °C - Variable belt speed, temperature controller with digital display - Movable shutters for thick items up to 12 cm (caps) - Fume extraction outlet, diameter 125 mm - Power: 4.8 kW, three-phase 400 V, 7 A - Overall dimensions: 270 x 131 x 130 cm, net weight: 265 kg LOCATION AND SHIPPING Equipment located in Bègles (Bordeaux area), France. Shipping across Europe and worldwide available on quotation. Tiflex screen printing machine, manual screen printing press, screen printing carousel, 6 colour 6 station press, textile screen printing equipment, t-shirt printing machine, garment printing, flash dryer, flash cure unit, infrared conveyor dryer, plastisol curing, screen printing pallets, used screen printing equipment.

Condition: used, In this offer you purchase a used feeding unit "BDT SIS-330 Feeder" Object of sale: 1 x BDT SIS-330 Feeder Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally. Dwodjr D Nw Repfx Ai Eod

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Dwodpfx Ajzdnnuei Esd Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: good (used), Year of construction: 1989, Heidelberg MO-V (4-Color Used Offset Printing Machine) • Model: Heidelberg MO-V (MOV) • Type: Used 4-color offset printing machine Dwsdpfx Ao Ahdt Eoi Esd • Year of Manufacture: 1989 • Printing Configuration: Straight machine (4/0 printing, no perfecting) • Dampening System: Alcolor continuous dampening with Baldwin refrigeration and recirculation • Plate Changing: Manual plate loading • Control Console: CPC 1.02 / CPC Tronic for remote ink and register control • Max. Sheet Size: 480 mm x 650 mm (19" x 25.5") • Condition: in good running condition (free of damages to gears or cylinders) • Availability: Immediate loading

Condition: new, Year of construction: 2026, DIABERG SPECTRA — Automatic Screen Printing & Finishing Line A configurable sheet-fed finishing line combining automatic screen printing with UV curing, cold foil and holographic laser-transfer processes. Machine configuration Automatic sheet feeder with sheet-position and feeding-fault detection. Drum-stop cylinder screen-printing unit. Adjustable screen registration and squeegee settings. Touchscreen controls with physical operating buttons. Centralized lubrication for the printing unit. Connected finishing module configured for the selected processes. Automatic sheet collection with alignment, pile-height adjustment and counting. Selectable finishing functions Process Configuration Spot UV Dwjdpfx Ae Ahduuei Ejd Screen-applied UV varnish with UV curing Cold foil Screen-applied adhesive with foil-transfer and curing equipment Laser transfer UV transfer varnish with holographic-pattern transfer and curing Wrinkle effects Compatible screen-printing ink with wrinkle-activation and curing lamps The combined configuration supports different finishing modes. Process settings and production sequences are selected for each job. Reference technical specifications Parameter Catalogue reference Maximum printing area 1,050 × 750 mm Minimum sheet size 560 × 350 mm Printing-unit speed 1,000–4,000 sheets/hour Printing-unit paper range 90–350 g/m² Transfer-module paper range 157–450 g/m² These are individual module specifications. Complete-line material compatibility and operating speed depend on the selected process, matched equipment and sample trials. Optional equipment Water-cooled air-cooling section. Servo-controlled squeegee pressure adjustment. Alternative feeder arrangements matched to the substrate. Configuration enquiry Please provide your required sheet size, substrate, grammage, finishing effects and production target to receive a matching machine configuration and technical quotation.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. Dedpfx Aiez U Ap Hs Eowd - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material)

Condition: used, machine/vehicle number: 95832, Equipment: compressor, Stahl KD 78/4 folding machine (KD 78/4-KTL-PD-T) with 4 folding pockets and attachments on 2 sides. Pallet feeder PD 78-T. Equipped with horizontal press delivery system SBP 46.D + MKE.D and roller delivery system. Max. paper width 78 cm. Machine from an active printing company, CE certified, Made in Germany. Available for pickup in Ghent, viewing possible. Dwsdpfx Ais Ahg Rys Eod

Condition: used, Year of construction: 2019, Vutek GS 2000 LXP LED Ultradrop Year of manufacture: 2018 (installed in 2019) Djdps Ah Ubvjfx Ai Eewd Resolution: 7 pl - 1000 dpi Colors: 8 colors + white Speed: up to 227 m²/h Print width: Plate/Roll media: 205 cm Good condition efi Fiery server

Condition: used, Year of construction: 2014, Printing technology: FDM: build process using molten plastic Build volume X × Y × Z: 254 × 254 × 305 mm Layer thicknesses: 0.178 / 0.254 / 0.330 mm Model material: ABSplus P430 Support material: SR-30, soluble support material Material supply: Separate cartridges for model and support material Cartridge capacity: Approximately 922 cm³ per cartridge Dwjdpfx Ao Ahkluei Eod Network connection: Ethernet RJ45 Software: Stratasys Insight for print preparation Power supply (as per nameplate): 100–240 V, 12–6 A, 50–60 Hz Product number: 163-00500

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Morgana Digifold Pro is the ideal product for folding heavier weight paper stock. Designed specifically for the professional digital or litho printer who has a need to crease and fold digitally printed, heavy weight or cross grained stock. Age 2013 For video please send your Whatsapp number. SPECIFICATIONS: Dimensions: 49.8″ (H) x 26.7″ (W) 79.5″ (L) 419 lbs Paper Information: Maximum sheet size 27.5″ x 15″ Minimum sheet size 8.2″ x 5.5″ Maximum paper thickness 0.015″ (approx 150lb cover) including laminated material Minimum paper thickness 0.004″ (approx 20lb bond) Dodpfx Ao Ah Dr Dji Eowd Maximum number of folds: 2 Electrical: Speed per hour (A4 in half) 6000 sph Power requirement 240v 50/60hz Price under request More pictures and video is available.