Used Roll forming lines for sale (66)

Condition: excellent (used), Functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming Cjbu Ugjvr Tntscpjgt • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Condition: repair required (used), Year of construction: 2013, Functionality: not functional, machine/vehicle number: 1302-22, sheet thickness steel (max.): 5 mm, total width: 2,000 mm, total length: 15,700 mm, total height: 1,770 mm, input voltage: 400 V, overall weight: 11,000 kg, Rollforming machine for trapezoidal sheets T8 Technical data of the machine: - Manufacturer: Xiamen Zheng Liming - Date of manufacture: 12.2013 - Series: 1302-22 - Overall dimensions L x w x h (including sheet take-up table): 15.7m x 2m x 1.77m - Weight: 11 000 kg - Supply voltage: 400V Cobuevdvcqs Ugcpogt - Working speed: 15m/min - Sheet cutting: hydraulically operated guillotine - Sheet take-up: pneumatically operated table Raw material / final product data: - Sheet thickness: 0.25-0.5mm - Raw material strip width: 1000mm - Maximum sheet length: 6m - Total sheet width: 965mm - Useful sheet width: 945mm - Profile height: 8mm Machine condition: currently, the machine is in a state of preservation, not used. To be brought into working order, some parts need to be reconditioned and completed: three-phase fan motor, HMI touchscreen, three-phase motor converter, several small electronic components such as buttons/fuses/contactors, pneumatic cylinder for the take-up table, polyamide rollers for the take-up table (a list of the necessary parts, including the codes, can be provided).

Year of construction: 1988, Condition: good (used), 18 stations shaft Ø: 89 mm strip width: 600 mm Cobu Uobh H T Isgcpjgt strip thickness: 3 mm

Year of construction: 1976, Condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Cgsbusg Ul S De Ugcpjt Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Condition: repair required (used), Year of construction: 2000, Functionality: unexamined, machine/vehicle number: 688784, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, total height: 2,210 mm, total length: 2,210 mm, total width: 2,210 mm, wire diameter: 3 mm, workpiece width (max.): 700 mm, workpiece length (max.): 450 mm, net weight: 3,700 kg, Agiecut Evolution 2 Water bath machine with automatic wire threading Conical cutting device up to max. 30 degrees Cgebujvmxgdo Ugcpot Universal clamping frame and hand box Agiesetup 3D automatic detection of the workpiece plane and position

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. 1 roller unit + guillotine. Cjbu Ugot Ak Dpscpegt Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Instruments for semi-closed channel. Instruments for marking.

Condition: used, Year of construction: 1952, For sale used Davy 4 stands, 4Hi tandem mill Davy 4 stands, 4Hi tandem mill: - Input gauge: 1,6 - 5,6 mm - Output gauge: 0,38 - 2,5 mm Cobu Ujvb A D Nsgcpogt - Width incoming: 140-400 mm - Max. coil OD incoming: 1880 mm - Max. coil weight: 6 t - Avg. line speed: 653 m/min - Installation year: 1952 - Eccentricity correction: 1995 Documentation is available, machine is dismantled. Detailed information in the attached document.

Condition: repair required (used), Year of construction: 2013, Functionality: not functional, machine/vehicle number: 1304-15, type of input current: three-phase, sheet thickness steel (max.): 6 mm, total width: 1,720 mm, total length: 6,100 mm, total height: 1,600 mm, input voltage: 400 V, motor voltage: 400 V, net weight: 6,000 kg, Double rollforming machine for plasterboard profiles CD60 & UD30 Cobu Ugcsvdva Nepogt Technical data of the machine: - Manufacturer: Xiamen Zheng Liming - Date of manufacture: 12.2013 - Series: 1304-15 - Overall dimensions L x w x h: 6.1m x 1.72m x 1.6m - Weight: 6 000 kg - Supply voltage: 400V - Working speed: 12m/min - Sheet cutting: hydraulically operated guillotines Raw material / final product data: - Sheet thickness: 0.5-0.6mm - Raw material strip width CD60: 120mm - Raw material strip width UD30: 73mm - Maximum profile length: 4m Machine condition: in order to be brought into working condition, the machine needs a more extensive reconditioning, since the electrical system (full automation/motor) and the hydraulic system (meaning the complete hydraulic group) are no longer available, they were used at another project. The active parts of the machine that remained available were the profile forming parts (roller set), the feed system (chains and sprockets), the cutting system (guillotines + hydraulic pistons), and the machine frame.

Year of construction: 1968, Condition: good (used), 15 stations shaft Ø: 120 mm strip width: 180 - 830 mm strip thickness: 10 mm Csbu Ugobif Evjcpsgt

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS Cgsbofgl Aqju Ugcpot MADE IN ITALY

Year of construction: 2005, Condition: excellent (used), 16 stations Cgeboh I Nizou Ugcpst design: cassette shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Condition: used, 8 STATIONS Technical characteristics: Cebuj Dv I Ao Ugcpogt ROLLFORMER 8 STATIONS 400mm WIDTH

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm Cgjbu Ugcjbif E Ejpjt strip thickness: 1,5 mm

Condition: refurbished (used), ROLLFORMING LINE Cebu Ugog Rkv Escpogt

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette Cjbu Ugcoh Tm Rljpegt shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: excellent (used), Year of construction: 2005, 19 stations design: cassette shaft Ø: 30 mm strip width: 200 mm Cgjbu Ugsh Tm Rajcpjt strip thickness: 1 mm