Used Wood shredder for sale (378)

Condition: good (used), Year of construction: 2005, operating hours: 13,000 h, Willibald MZA 4600 shredder from 2005 with 13,000 hours of use in good condition. Duolev Hmxbsir Tiget

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, Functionality: fully functional, power: 33 kW (44.87 HP), overall weight: 1,570 kg, fuel type: diesel, color: original, axle configuration: 1 axle, fuel: diesel, Schliesing 325EX‑D chipper: The compact one with a rotating chipping unit The Schliesing 325EX‑D chipper is a powerful wood chipper that is ideal for demanding wood chipping applications with its powerful motor, flexible feed options and robust design. With a pivoting feed hopper and a variety of safety features, it meets the highest standards and offers an efficient solution for processing logs up to a diameter of Ø 20 cm. Technical data: Type: Schliesing 325 EX Logs: Up to Ø 20 cm Delir Tov Ev E Ujigeut Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Kubota common rail turbo diesel engine with DPF, output 33 kW / 44.9 HP. Industrial freewheel clutch between engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with EU homologation. Robust, fixed sheet steel fenders. Device for support wheel at the front and parking support at the rear. Lighting in accordance with StVZO with impact-protected components. Pneumatic tires 205/65 R15C with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth. Fully galvanized hopper flap for durability. Hopper dimensions (inside): width = 1,040 mm, height = 960 mm. Pivoting blow-out pipe with adjustable spreading flap. Blow-out pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping mechanism: Rotatable chipper housing with adjustable input angle of 270°. Safety circuit in accordance with EN 13525. Chipping disk with a diameter of Ø 655 mm and a thickness of 35 mm. Closed blade system for quick and safe blade changes. Continuously adjustable chipping knives, can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size. Fill level indicator for the hydraulic oil tank.

Condition: good (used), Rotor 264 mm Feed opening approx. 510 x 815 mm Rotor length approx. 510 mm Duelijuwc Tter Tigot Motor 15 KW Knife 24 Sieve: Standard Technical data on request

Condition: good (used), Disposal Line/Chipper System/Drum Chipper Klöckner KTH 120x400L2WT with 30 kW drive motor with conveyor belt approx. 8 m long with vibrating chute approx. 15 m long with screening before the drum chipper with double scraper conveyor with distributor for sawdust and wood chips Duslir Tiov I Azzogjt fully functional - available immediately Location: Austria, near Villach

Year of construction: 2023, Condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Dolioncd Azor Tigeut Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: good (used), Year of construction: 2014, Maier high-performance drum chipper. Feed 1200 x 450 mm. 8 feed rollers. Hydraulic lifting and damping of the swing arm. Wood chip size 30 mm. Drive motor 200 KW. Feed motors 11 KW. With hydraulic unit, 2nd rotor Dslir Tot Ak Uzsigsut and spare parts. Dismantled and loaded free on truck.

Condition: excellent (used), Year of construction: 2007, operating hours: 3,427 h, Willibald MZA 2800 shredder from 2007 with 3427 hours of use in good, perfect condition. Djlov Hmw Djir Tigout

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Djlev Evx Usir Tigjut Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: excellent (used), Year of construction: 2023, Rotor 260 mm Feed opening approx. 630 x 810 mm Rotor length approx. 630 mm Dslijuwc I Ror Tigsut Motor 18.5 KW Knife 30 Sieve 25 / 30 mm (can be exchanged) Robust design technical data on request

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: VAZ100, color: blue, Wood shredder VAZ 100, feed opening 100 x 80 cm, feed channel height 160 cm. The machine has been completely overhauled and is in very good condition. All electric motors have been replaced. Main bearings have also been replaced. Drawer slide guides are almost as good as new. Hydraulic drawer, main rotor motor 7.5 kW The machine can be connected with a 32 A plug and can also be shown in operation on site if desired. The machine is immediately available and ready for use. Connection power 32 A Delir Tiov En I Uogjut

Year of construction: 2023, Condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Dujlirsncd Duo Tiget Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 1999, Condition: like new (used), Rotor 600mm Dusleh Nrcaoir Tigst 18 teeth Chute 600 x 750mm 15kW engine Hydraulic pressure

Condition: good (used), Year of construction: 2007, operating hours: 4,700 h, Functionality: fully functional, Hammel 750D pre-shredder from 2007 with 4700 hours of use in good condition. Delov Hmvmsir Tigjut Mortor 330cv N Series 521

Condition: refurbished (used), Year of construction: 2001, Functionality: limited functionality, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Dslir Tijtxykfegout Second row of knives

Condition: used, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Chip size (10 - 60 mm) Djlirsvrk A Us Tigeut Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 15/20 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: excellent (used), Functionality: fully functional, color: blue, A completely rebuilt BRUKS 1500M machine, ready for immediate operation. The machine is designed for efficient wood crushing, wood chip production and is suitable for industrial use. Number of blades: 3. Dolir Tisv Evp Hogsut Main motor: 60 kW. Weight: 4800 kg.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Djlirsivpthj Tigeut Model -WL6S Main motor -22kw

Condition: excellent (used), Year of construction: 2000, 18.5 kW Duslir Tijri Tv Iogst We can send you a video

Condition: good (used), Year of construction: 2011, operating hours: 4,800 h, Functionality: fully functional, ARJES VZ750 pre-shredder from 2011 with 4800 hours of use in good condition. Doljv Hmu Neir Tigeut Serial number #68

Condition: refurbished (used), Year of construction: 2000, machine/vehicle number: H1654, Ready for delivery Gearbox replaced, cutting unit completely overhauled, new oils and wear parts Connected load: 22 kW Feed opening: 800 x 1200 mm Rotor working width: 820 mm Rotor diameter: 348 mm Rotor type: G-rotor Dslirsulfclo Tigjut Blade size: 35 x 35 mm Number of blades: 40 blades Sieve size not yet determined PLC controlled Hydraulic tank size: 20 l

Condition: good (used), SINGLE SHAFT SHREDDER WEIMA Djliretqdw Ro Tigout MODEL WLK6 MAIN MOTOR 45KW

Condition: good (used), Year of construction: 2022, MORBARK WH2400XP shredder from 2022 in good condition. Duelir Tiev Hmtxjget SERIAL NO. 193-1036

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: H2415, Immediately available with large rotor bearings Connected load: 22 kW Feed opening: 820 x 1200 mm Rotor working width: 820 mm Dujleulfmqsir Tiget Rotor diameter: 368 mm Rotor type: G-rotor Blade size: 35 x 35 mm Number of blades: 40 blades Sieve size: not yet determined PLC controlled Hydraulic tank size: 20 l Subject to errors and minor changes

Condition: good (used), Year of construction: 2011, operating hours: 8,500 h, Functionality: fully functional, WILLIBALD EP5500 Shark shredder from 2011 with 8500 hours of use in good condition. Dujlev Hmtreir Tiget

Condition: good (used), Year of construction: 2013, operating hours: 7,900 h, Functionality: fully functional, WILLIBALD EP5500 Shark shredder from 2013 with 7900 hours of use in good condition. Djliov Hmtler Tigsut SERIAL NUMBER #116 Extras: 32 hammers