Used Wood shredder for sale (379)

Condition: like new (used), Functionality: fully functional, with Scania 8-cylinder diesel engine up to 60 cm trunk diameter Dehxyjwc D Hge Tk Sjkl with tracked chassis only 1,000 hours

Condition: good (used), Year of construction: 2009, Functionality: fully functional, power: 18.5 kW (25.15 HP), Zerbrik Shredder Series PZ 83-1 Year of Manufacture 2009 Dkshxyov Tmbcs Tk Ssl S/N 50015 Manufacturer Zerbrik Deutschland GmbH Hopper opening 83 x 100 cm Hopper volume 1 m3 Rotor diameter 360 mm Rotor speed 70-90 rpm 40 cutting knives 18.5 kW main motor 1500 kg Shredding of hardwood, softwood, chipboard, MDF, cardboard, plastics and other materials Rotor The rotor is made of wear-resistant solid material with contours turned into it. The knife holders are welded into them. Each contour contains two knife holders with cutting tools, achieving greater and more even chip removal across the entire rotor width. This protects the machine and bearings. Cutting Tools The knives are available in various designs. Depending on the wood chips, there are full-diamond blades and concave blades. Depending on the model, they can be used four or eight times. Perforated screen The perforated screen determines the wood chip size. This largely depends on further processing, e.g., briquetting, wood chip heating, etc. Turbo clutch A turbo clutch is also installed for larger electric drives. This ensures smooth starting and compensates for any power peaks that occur.

Condition: new, Year of construction: 1995, operating hours: 257 h, machine/vehicle number: 951491, Selling our PTO driven wood chipper Ready for immediate use Net price Without warranty Dkshxy Tksr Izw Rs Sel

Condition: excellent (used), Year of construction: 2019, operating hours: 622 h, Functionality: fully functional, machine/vehicle number: 121-6800, LZ 400 Shredder Drive: 18.5 kW Screen: 10 x 10 mm (suitable for briquette production) Vacuum pressure switch Dimensions (L x W x H): 2035 x 1075 x 1100 mm Inlet width: 400 mm Inlet height: 500 mm Inlet height: 150 mm Inlet diameter: 240 mm Rotor diameter: 370 mm Rotor speed: approx. 284 rpm Drive motor: 18.5 kW Inlet: 2 x 1.1 kW Weight: approx. 1300 kg Dohxy Tjwc Tknsk Sekl Noise level: approx. 95-105 dB(A) Horizontal shredder with rotor and inlet rollers Wide feed chute Cutting blades and counter blades made of special steel Control cabinet, Siemens SP IP 54 control system Load-dependent Control system Soundproof cabin Including vibrating conveyor (length: 3.00 m)

Condition: used, Year of construction: 1997, Wood waste shredder Weima WL6 single shaft IDL000812 - manufacturer: Weima - model: WL6 - wood shredder with moving floor - electric cabinet - hydraulic station - capacity: 0,9 m3/hour - rotor length: 800 mm - number of knives: 42 - fraction size: 10-40 mm - weight (approx): 1700 kg The WL 6 single-shaft shredder. Classic shredder for wood waste of all kinds. Dkohxju Aut Aoy Tk Ssl

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 18.5 kW (25.15 HP), Untha LR 700 single-shaft chipper, new Drive power: 18.5 kW Hydraulic drive power: 1.1 kW Rotor diameter: 300 mm Rotor speed: 98 rpm Number of indexable inserts: 19 Filling opening: 700 x 1065 mm Extraction nozzle diameter: 200 mm Required extraction speed: 28 m/s Recommended pipe cross-section: 200 mm Weight: approx. 1800 kg Workplace-specific Sound pressure level LPA 1 m: 82 dB(A) Dohju Id Ugoxy Tk Sjkl Diameter of perforated screen: 15 - 40 mm Throughput*: up to 6 srm/h (depending on material properties and perforated screen diameter) Applications - Hard and soft wood - OSB - Particleboard - MDF - Veneers - Cross-cut wood - Reliable and economical cutting system - Unique indexable insert geometry - Low-wear perforated screen - Powerful and low-wear swivel slide - Energy-efficient and trouble-free drive concept

Condition: good (used), Year of construction: 1995, Slow runner with drawer Rotor width 800 mm with new counter knives 20 new knives on rotor Sieve with 15 mm holes 18.5 kw motor Dkshxyju Tqzbs Tk Sel approx. 5400 operating hours

Condition: excellent (used), Year of construction: 2020, DOZAMECH H033/4 feed mixer, serial number: 148, year of manufacture: 2020,  FARMET FE250 WFM Clever Max extruder – no nameplate,  TESTMER PD-1 granulation press, year of manufacture: 2020, serial number: 27/20,  TESTMER OCK-1 column cooler with sifter, serial number: 33/20, year of manufacture: 2020,  TESTMER PC-120 bucket elevator, serial number: 3/20, year of manufacture: 2020,  TESTMER BGN drum coater, serial number: 1/20, year of manufacture: 2020, Dehxyewfdyfj Tk Sokl  TESTMER ORT-1000 rotary sifter, serial number: 10/20, year of manufacture: 2020,  TESTMER WMS-200 magnetic catcher, serial number: 356/20, year of manufacture: 2020,  FOSS KN295 Knifetec water-cooled mill, serial number: 91835680, year of manufacture: 2019,  DELL computer, no. F35N7Z2,  FOSS NORS DS2500F SR analyzer, serial number: 91833404, year of manufacture: 2019,  Screw conveyors,  5m belt conveyor,  Control cabinet

Condition: good (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 078603 L115, power: 45 kW (61.18 HP), Infeed width: 650 mm Infeed height: 150 mm Dehxyowcmgis Tk Sekl Infeed rollers: 2 Material feed: Shaking chute (approx. 18 m) 2 sets of 4 new knives each + 2 sets of 4 used knives each

Condition: used, Chipper Bruks 602CS IDC000117 - drum chipper - manufacturer: Bruks - model: 602 CS - drum diameter: 600 mm - infeed opening: 540 mm X 300 mm - number of knives: 2 - maximum solid wood thickness: 180/100 - weight: 1400 kg - standart chip length: 20-35 mm - capacity: 10-20 m3/h - electric motor: 26 kW Dehxy Tkovldmao Sokl - electric motor for fan: 11 kW

Condition: good (used), Year of construction: 1994, Functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Djhxy Tjtgqlyjk Sjkl Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: used, Wood chipper Erjo IDC000103 - drum chipper - infeed opening: 290 mm X 444 mm - outfeed opening: 130 mm X 450 mm Dohxyju Ep Awe Tk Sokl - number of knives: 4 - weight: around 3000 kg - manufacturer: Erjo - model: 204 MA - 20-40 m3/hour

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Dehxst Tvk Aey Tk Sskl 22 kw motor with discharge auger

Condition: good (used), Year of construction: 1993, operating hours: 3,000 h, Functionality: fully functional, power: 15 kW (20.39 HP), Slow runner with moving floor Dshxev Ilvhey Tk Sjkl Rotor width 1 m Motor 15 kw Perforated sieve 20 mm

Condition: good (used), Year of construction: 1996, Powerful chipper with large rotor and 30 kw motor Dohxy Tjv D D T Djk Sokl Working width 800 mm Year of manufacture 1996 fully functional

Condition: used, Year of construction: 1995, Functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 5,200 kg, Large chipper, ideal for pallets or similar. Built like a tank, weighs 5 tons. Rotor width 1300 mm. Djhxy Tou Apkisk Sskl Motor 37 kW. Travel to rotor approx. 1.3 m. With discharge screw.

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal infeed max. feed width 300 mm Dkjhxyou Ezp Ao Tk Sol max. feed height 85 mm Motor 30 kw

Condition: good (used), Year of construction: 1994, Chipper without moving floor 'Rotor width 600 mm motor 15 kw large rotor diameter with new rotor bearings Gearbox with new bearings Djhxy Tker Eh Nke Sekl

Condition: good (used), Year of construction: 2001, power: 22 kW (29.91 HP), Low-speed rotor with push floor Rotor width 102 cm Motor 22 kw 40 knives on rotor Dkshxy Tkotqfrco Ssl

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Dkohxy Tkep H Sv Dj Sjl 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), Year of construction: 1993, Low-speed rotor with push floor 800 mm rotor width Dohxy Tehrmzvjk Sekl

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included Dkshok Twl Tjxy Tk Sjl working width 350 mm Motor rotor 30 kw

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Dehxy Tkju Rl Ruj Sokl

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw frequency-controlled for variable speed without vibrating chute Dohxsu Rl Sfsy Tk Sekl

Condition: good (used), Year of construction: 1990, Cutting mill for wood chips crushing for pelet production or for grain or other Dkshxy Tkoitdaxo Ssl 10 mm sieve 55 kw motor