Used Wood shredder for sale (333)

Condition: used, Rotor 1400mm Opening 145cm/120cm Hnedpoxn H E Hefx Afteu 45kw motor 60mm grid 380V

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price Hjdpfjbtnftox Aftenu

Condition: excellent (used), Year of construction: 2000, Gross single-shaft shredder GAZ 62, year of manufacture 2000, 18.5 kW, cutting system with 30 Karo blades, rotor ø 248 mm, extraction nozzle 160 mm, hopper capacity 0.6 m³, hydraulic push floor, opening 600 x 800 mm, length 1800 x 1200 mm, height 1700 mm, weight 1300 kg Hnsdoxnc Ttopfx Aftsu

Condition: excellent (used), Catalog number 7712 TECHNICAL DATA - Inlet dimensions: 4800x150 mm - Shaft width: 560 mm - Shaft diameter: 350 mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse - Sieve diameter: 12 mm - Upper conveyor belt - Lower conveyor belt - Feed conveyor length: 1300 mm - Infeed table length before conveyor: 1000 mm - Main motor: 22 kW - Feed motor: 0.75 kW, 1.5 kW - Dimensions (L/W/H): 3670/1200/1400 mm - Weight: 1900 kg ADVANTAGES – German-made – Autoreverse – Conveyor belts above and below – Very good condition – Used shredder Hsdpew H Ad Sjfx Aftonu Net price: 55,900 PLN Net price: 13,150 EUR depending on 4.25 exchange rate (Prices may change with greater fluctuations)

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Hedpfx Asxnlgpsftenu Storage location: Supplier

Condition: used, Year of construction: 2007, Main electric motor: 320 kW, three-phase, 50 Hz, with a soft start system to reduce starting currents and mechanical load. Feed roller drives: separate electric motors with gearboxes. Hydraulic drive: electric motor, pump, tank, system of distributors and pressure gauges. Feed type: roller with hydraulic pressure. Productivity: 300 bulk m3 per hour Finished chip size: 20–50 mm (adjustable). Hnodpoxpid Ijfx Aftsu

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Hnsdpfjrblwdsx Afteu - Hydraulic feed - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm Hsdpfx Asbunq Hjftenu hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg ADVANTAGES – German production – unpainted – very good condition – used chipper Hnsdperm Nibjfx Aftju Original photos Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Net price: 8440 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Hnsdpexnlbtofx Afteu

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm - Weight 570kg Hnodporblx Hefx Aftju - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Subject to prior sale Hnodebxu Dhjpfx Aftju

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - inlet width 550mm - inlet height 220mm - shaft width 630mm - knife length 630mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor approx. 1.5kW - toothed pulling shaft from the top - upper shaft motor approx. 1.5kW - vibrating chute - vibrating chute length 4750mm - vibrating chute width 450mm - main motor 45kW - vibrating chute motor 1.5kW - auto reverse - reverse gear - total machine dimensions L/W/H 3200x1700x1400mm - total machine dimensions length/width/height 4750x800x1100mm Hnjdpfjwa Am Hox Aftou - weight about 4500kg ADVANTAGES - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 120,900 Net price: EUR 28,440 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz Hnodpfjh Eiw Iex Aftju weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: excellent (used), Catalogue number 7672 Hodpfowrpv Esx Aftjnu TECHNICAL DATA - Inlet of loading hopper: 1200x1000 mm - Outlet for shredded wood: Ø160 mm - Working width of rotor: 980 mm - Main motor: 18.5 kW - Number of knives: 24 pcs - Knife dimensions: 30x30 mm - Screen: 20 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850 mm - Weight: approx. 2,500 kg ADVANTAGES – German manufacture – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,210 EUR at 4.25 EUR exchange rate (Prices may change with larger fluctuations)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Hnjdjh Hnp Dspfx Aftju Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - loading hopper inlet: 870 x 735 mm - rotor working width: 720 mm - main motor: 18.5 kW - pump motor approx. 0.75 kW - number of knives: 17 pcs - knife dimensions: 80 x 40 mm - screen: 20 mm - pressure drawer - electric auto-reverse - outlet for shredded wood: Ø 250 mm - dimensions (L/W/H): 2000 x 1350 x 1370 mm - weight: 1586 kg ADVANTAGES – pressure drawer – very good condition – used shredder Net price: 38,900 PLN Net price: 9,160 EUR at a rate of 4.25 EUR Hnjdeudv Nfjpfx Aftju (Prices may change with greater fluctuations)

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Hedpfxemhh Idj Aftsnu Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: excellent (used), CATALOG NUMBER 7770 TECHNICAL DATA - Inlet width: 260mm - Inlet height: 240mm - Shaft width: 350mm - Shaft diameter: 350mm - Number of knives: 2 pcs - Screen size: 28mm - Outlet diameter: 210mm - Autoreverse - Top track, feeder 1.1kW - Bottom pulling shaft, toothed 2 pcs, 0.75kW - Feed belt length: 3700mm - Feed belt width: 250mm - Main motor: 22kW - Overall dimensions (L/W/H): 5400x1000x1200mm - Machine and feeder weight: 1600kg ADVANTAGES – German production – Autoreverse – With conveyor belt – Used chipper, in very good condition Net price: 38,900 PLN Hodpfx Aexl Dzteftjnu Net price: 9,150 EUR based on 4.25 EUR rate (Prices may vary in case of significant fluctuations)

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Hnodpfxepdqzxj Afteu Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Loading hopper inlet – hydraulic lifting 1200x1000mm - Discharge for shredded wood diameter 200mm - Rotor working width 980mm - Main motor 37kW - Number of knives: 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressure drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H): 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor for wood chips – Pressure drawer, toothed Hodpfxew Tbw As Aftenu – Knives as new – New counter-blade – Very good condition – Used wood chipper Net price: 106,900 PLN Net price: 25,150 EUR (rate 4.25 EUR) (Prices may change in case of larger fluctuations)

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Hodpfx Afjutmw Hjtsnu Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: excellent (used), CATALOG NUMBER 7725 Hodpfxow S H Azo Aftenu TECHNICAL SPECIFICATIONS - Loading hopper inlet: 1200x1000 mm - Outlet for shredded wood: diameter 200 mm - Rotor working width: 980 mm - Main motor: 22 kW - Number of knives: 24 pcs - Knife dimension: 30x30 mm - Screen: 16/11 mm - Pressure drawer - Electric auto-reversing system - Dimensions (L/W/H): 2600x2000x1720 mm - Weight: 2125 kg ADVANTAGES – German-made – Auto reverse – Pressure drawer – Very good condition – Used wood chipper Net price: 95,900 PLN Net price: 22,560 euro depending on exchange rate, 4.25 euro (Prices may vary with larger currency fluctuations)

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Hodpfoxiq Syex Aftjnu Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Hodpfx Afocbtpkotonu Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure