Year 2019 ADIGE Automatic high-precision tube cutting machine TS72

ADIGE Automatic high-precision tube cutting machine TS72

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. Hodpjtvb Iujfx Af Tjff - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm Hfodpfswbgizjx Af Tjf - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: ready for operation (used), Year of construction: 2019, laser power: 8,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 130 mm, overall weight: 14,000 kg, total height: 2,250 mm, product length (max.): 10,500 mm, number of axes: 3, This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information. • Laser source: IPG • Maximum sheet size: 3000 × 1500 mm • Positioning speed (X–Y): 140 m/min • Positioning accuracy: ±0.050 mm/m • Repeatability: ±0.025 mm • Maximum sheet weight: 900 kg • Electrical consumption: 28.1 kW/h • Compressed air consumption: 30 Nm³/h • Cutting gases: Oxygen (O₂) / Nitrogen (N₂) • Gas pressure: min. 12 bar – max. 32 bar • Ground resistance: < 10 Ohm Additional equipment • Interface for third-party automation system LM4400 • Automatic nozzle changer LM5130 Hfedpfxox S Skle Af Tjf • Automation cleaning unit LM5600

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2013, operating hours: 42,900 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: IPG, laser power: 1,000 W, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 90 kg, power: 21 kW (28.55 HP), year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Workable dimentions: Round tube 12 - 120mm Rectangular tube 12 - 100mm Loading tube length 6500mm Hedpfx Aoyqx Tvef Toff Maximum load cradle capacity 4000kg Maximum unload length 4500mm

Condition: used, Year of construction: 2015, TUBE LASER CUTTING MACHINE, Model LT8, made by ADIGE Hsdpfxeyma Its Af Tjff This tube laser cutting machine is in excellent working condition. Manufactured in 2015, it has been meticulously maintained, ensuring optimal performance. Technical data: - Round profiles diameter: 20 - 220 mm - Square profiles: Max. 200x200 mm - Max length: 8500 mm - Max tube weight: 32 kg/m - Laser Source: CO2 - Laser Power: 3 kW - Lens holders for: 5 & 7.5 “ - Bundle loader & Loading module: with 5 arms - Tube length loading: 8500 mm - Cutting head: 3D Tilt head - Max tube length unloading: 8500 mm - Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm - Front unloading conveyor for short parts: Up to 500 mm Scope of supply: - TRUMPF TruLaser Tube 5000 - Tube LoadMaster - Bundle loader with 8.5 m step loader - Finished part 8.5 m collecting table - Chiller - Extractor Special features - Machine integration Rofin - Rear scrap conveyor - Capable for open profiles - Handling option for delicate tubes - High speed pierce boost - Weld seam detection - Artube modules second licenses + USB hardware key - CAD – CAM - Artube adv CAM features - Direct import steps / Iges files - Post Processor LT8 for Artube (1st license) - Production time and Cost calculation - Artube Service Contract Annual Fee - Advanced edit - Part viewer - Cut and fold library - Booster drilling process - Remote tele-diagnostic - Siemens 12 months full warranty - Auto focusing head - Protube Express off line nesting and scheduling - Protube Enterprise productivity & machine monitor - Whole nbar processing software - Pierce booster edge detection Round profiles diameter: 20 - 220 mm Square profiles: Max. 200x200 mm Max length: 8500 mm Max tube weight: 32 kg/m Laser Source: CO2 Laser Power: 3 kW Lens holders for: 5 & 7.5 “ Bundle loader & Loading module: with 5 arms Tube length loading: 8500 mm Cutting head: 3D Tilt head Max tube length unloading: 8500 mm Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm Front unloading conveyor for short parts: Up to 500 mm

Year of construction: 1993, condition: ready for operation (used), Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Hfjdpfew Na Huox Af Tjf

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Hodpfxsvtl Nrs Af Teff Model: HST 40/6 Location: Strojrem, Križevci Year of production: 1993 Bending length: 4050 mm Max bending thickness at 45 kg/mm²: ~6 mm Working stroke: 1000 mm Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Hfodpfx Aeyllvyef Tef Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: excellent (used), Year of construction: 1996, Excentrical press: Capacity: 100 ton Clutch: airclutch Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Hfedpohtiwhsfx Af Tof Height: 2800mm Weight: 9.5 ton

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 35,000 h, machine/vehicle number: 0760801000602, control type: CNC control, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, pipe length (max.): 3,250 mm, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, Adige Multiflex Tube Cutting Machine In working condition Hodpfx Afoxmg Aij Tjff Capable of cutting tubes from 10 mm to 60 mm diameter, tube brushing possible on both ends, measurement control via optical sensors, cutting tolerance +/- 0.5 mm, maximum cutting length 3,250 mm. The machine is equipped with an automatic tube packaging system using two magnetic arms. Packaging can be programmed as round, square, hexagonal, or in carton box. Machine comes with several mechanical and commercial spare parts.