Column drilling machine

ALZMETALL AB 4

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm Nlodpfxsx Iwgqj Agzok surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm comes from a vocational school Features: - automatic feed - infinitely variable speed control - digital speed display - adjustable drilling depth stop Njdpfovzt Dyjx Agzslk - drill spindle guard

Condition: good (used), Year of construction: 1954, Drilling machine, bench drill, pillar drill, column drill -Table size: 400 mm -Spindle mount: MK4 -Protrusion: 320 mm -Speeds: VIP gearbox 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm Nledpedi Smkofx Agzok -Feed rate: 0.09-0.28 mm/rev -Tachometer defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: ready for operation (used), A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible. Nlsdpfjx Hz N Tox Agzok

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Nlodpfx Ajwnpwzegzsk Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Condition: good (used), Column drilling machine Make ALZMETALL Type:AB 4 SJ ( year 1970 ) Njdpfelq D Akjx Agzelk with coolant device, infinitely variable speed, with 2 gears. Drill hole in steel max: 40 mm Spindle mounting :MK 4 spindle speed : 80 -720 rpm Spindle stroke max : 150 mm feeds : 0.09 / 0,16 /0,28 mm/rev Table diameter : 560 mm Machine ready for use .

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds Nljdpfxsn N Ekco Agzjk - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. Nodpfx Aokt Nqqogzolk - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Nsdpfx Agju Idk Uszjlk Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm table surface area 730 x 590 mm Njdpfx Agown T A Ujzslk

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t Njdpfx Ajvh I U Togzjlk dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW Nlodpfx Agjwncaiszek - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Nodpfx Agjmp Tp Hjzelk Machine is ready for use .

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Nlodpfjqcuc Tjx Agzjk

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm Nodpfx Agov Ehftjzjlk table surface area 720 x 5 mm