Laser cutting machine

AMADA HFE 3I 2204

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm Dsdpfx Agog Iirnsdeul

Condition: excellent (used), Year of construction: 1971, Centre lathe (parallel lathe) Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Max. swing over bed (bed with 4 guideways): 2,200 mm Max. swing over carriage: 2,000 mm Max. turning length: 10,000 mm Max. load between centres (without steadies): 15,000 kg Spindle speeds (4 ranges): 1–100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Duodpfxow Az Hds Agdol Equipped with: 4-jaw chuck, dia. 2,000 mm 3 roller steadies

Year of construction: 2014, condition: ready for operation (used), A defective CNC precision surface and profile grinding machine ABA is available. Grinding length: 2500mm, grinding width: 1020mm, cross travel: 920mm, cross feed intermittent: 750mm/pulse, cross feed continuous: 5000mm/min, table spindle center distance: 1100mm, magnetic plate dimensions X/Y: 2500mm/1000mm, max. table load: 5000kg, table speed: 60m/min, spindle power: 26kW, grinding wheel dimensions X/Y/Z: 500mm/100mm/203mm, grinding wheel rotation speed: 35m/s. Machine dimensions X/Y/Z: approx. 8000mm/4000mm/3150mm, weight: approx. 20000kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000h, cycle time: approx. 400h. Including cooling unit Hyfra sigma 13-S, year of manufacture: 2014. The linear drive of the X-axis is defective and has been dismantled. Documentation available. On-site inspection is possible. Duodpfx Agowi Tpkedol

Condition: used, different types available Duedpfx Aodc A Sbegdsl

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm Dujdpfx Aow Au I Isgdol max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Duedpfx Ajwq Dpqogdjl Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor - With 4 roller sets - Emergency stop Djdpfsgg Nq Hsx Agdeul - 400V

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW Dodpjxddvnsfx Agdeul faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Duodjwl U Rhepfx Agdjl Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical Specifications: Press Brake: Model: AMADA HDS 1030 NT Working Length: 3100 mm Folding Width: 2700 mm Press Force: 100 t CNC Control: AMADA AMNC PC 3D-graphic 15-inch TFT Color Screen Controlled Axes: 7 Drive: Servo-Hydraulic Installation Height: 500 mm Motorized Adjustable Backgauge: 600 mm Thrust: 415 mm Stroke: 200 mm Working Height: 960 mm Motor Power: 9 kW Dimensions (Length x Width x Height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Loading and Unloading Robot: Model: ASTRO-MP 20 Max. Capacity: 20 kg Number of Controlled Axes: 6 CNC control: AMADA AMNC II Drive: AC servo motor Dusdpewmw Acefx Agdsl Bending robot: Model: ASTRO-100 NT CNC control: AMADA AMNC II Max. capacity: 20 kg Number of controlled axes: 5 Length of linear axis: 3080 mm Max. cutting size for sheet metal: 800 x 1000 mm Max. cutting size for profiles: 300 x 1800 mm Drive: AC servo motor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.