Baader 176 Flatfish Filleting Line

Baader 176

Year of construction: 2015, condition: excellent (used), Type: DUAL-PACK 12 Kdsdpfx Ajqvnpaob Ujw Serial number: 152656 P12 Year of construction: 2015 Capacity: 500 kg/24h Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Kdjdpfx Asd Dtuhob Usw Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Condition: used, Manufacturer: Multivac Type: Vacuum machine Kdedjt Up Rrspfx Ab Ujw Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Kdodpef Epznsfx Ab Usw Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter Ksdpfx Absfgyh Uj Usdw • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump Ksdpfx Asuk Sp Njb Usdw - Busch R5 360m3/h - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. Kdedpfxot H Rcaj Ab Ujw We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Year of construction: 2024, condition: new, Bath pasteurizer option is the perfect solution for post fill pasteurization of your bottled or canned products. 97 units of standard 0.75 L bottles easily fits in 4 baskets.  Our bath pasteurizers can be produced in two options: 1. Autonomous bath pasteurizer with electric heating elements and integrated control panel. 2. Bath pasteurizer as an option together with HEAT or ECOHEAT pasteurizers. Then water heating is done with our pasteurizer and the same control panel is used for controlling both devices. Features: Mounted on pivoting wheels. Insulated heating bath to save the energy and temperature. Kdsdjrif Smepfx Ab Usw Can be used for glass bottles, jars, cans, any other heat resistant package. Works with different products, like juices, jams, marmalades, puree, sauces, etc. Automatic temperature and time control. Water overflow protection. Fast and easy loading and unloading of bottle trays. Entirely made of stainless steel. The bottles, cans, or jars are loaded into the trays and then trays are loaded into the bath. The desired pasteurization temperature and holding time settings can be set simply using the integrated control panel or on the HEAT or ECOHEAT pasteurizers. At a start of process, bottles or jars are placed into the bath, then water is filled into the bath until it reaches bottle neck. Then pasteurizer is connected, temperature (max 90 C⁰) and time is set. Then it starts to heat up the water inside the bath. When set temperature is reached, timer turns on and pasteurization is started. In the meantime, in the new set of trays filled bottles can be loaded for a faster exchange process. When timer ends, water out of the bath pasteurizer is released and bottles are unloaded. As the temperature is only measured in the bath, it is important to monitor the core temperature of your product to ensure that adequate pasteurization has been achieved.

Year of construction: 2017, condition: refurbished (used), Features and benefits: • Processes up to 30 pieces/minute • Adjustable peeling depth using ABL patented peeling system • Self-adjusts for different fruit shapes/types • High yield rate: 50% and up on fully peeled fruit • Reliable and robust performance for industrial and non-industrial processes • Maximizes productivity while reducing production costs OP30 is a semiautomatic peeling machine for citrus (orange & grapefruit), kiwi and mango. The machine can be used to peel one fruit variety at the time or even two separate fruit since it is equipped by two peeling head. When processing citrus fruit or kiwi the speed rate is 30 fruit x minute , while the speed it’s reduced to 24 fruit x minute when processing mango. Fruits are positioned manually into the feeding cups by one operator, if processing citrus a coring option is also available. Kdodpfx Aepv Uz Nob Ujw Two self centering hand will center and transfer the fruit between two mandrels , these will put in rotation the fruits to allow their peeling. The ABL patented peeling head will gently perform the peeling following the fruit shape according it’s dimension with the possibility to adjust the peeling depth also with the machine in function. Once peeled two blades will remove the two extremity (not for mango) and then release the fruit onto the peeled fruit conveyor. serial number: 201, year of construction: 2017, weight 1550 kg, 415 V, 50 Hz, 4.0 kW, total dimensions: 2650 mm x 1700 mm x 2100 mm. We have three machines. All are refurbished with new PLC and electronics.

Condition: as good as new (ex-display), Heating: steam Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Corpus height: 264 cm Kdodpsphnz Nofx Ab Ujw Min. room height: 320 cm Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Smoke generator width: 50,0 cm