1 head champagne corker

Bertolaso

Condition: used, Year of construction: 2018, Overview This can filler was built in 2018 by American manufacturer Wild Goose. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 50 cans/ min Formats that can be processed: 150ml 250ml 330ml 440ml 500ml Can lid: 202 and 200 CDL end spec Dimensions (Floor): 2,000mm x 1,000mm Gsdpfx Asrpwftsh Esbw

Condition: excellent (used), 12 x GRP storage container Volume: 65,000 liters Diameter: 3.500 mm length: 7.800 mm Weight: approx. 2.500 kg Gsdpfxshzt N Nj Ah Ejbw Final storage medium: vinegar (food) Type: Cylindrical with flat bottom Connections: 1 x manhole oval 1 x residual drain 1 x discharge connection

Year of construction: 1994, condition: ready for operation (used), Format: 0.2/ 0.7/ 1l. Gjdpfx Ahogquvie Esbw

Year of construction: 1997, condition: used, machine/vehicle number: LWT 30, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 30,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel. Material S235JRG2 steel . Incl manufacturer certificate DIN and nameplate. The tank is cleaned from the inside and bitumen insulated from the outside. Suitable for underground as well as above ground storage. Tank dimensions : Length : approx. 9.900 mm Diameter : approx. 2.000 mm Weight : approx. 6.000 kg Shape : cylindrical Equipment : on request For the use as a fire water tank an additional suction line with A-fixed coupling according to DIN can be offered. Of course, you can also co-design your tank system! All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. General: All offers are valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away. Gbjdpfxjc Nkyhj Ah Ejw With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: not inspected (used), Used aseptic machine for the production of beverages in cartons. Manufacturer: TETRA PAK Godpsu Sg Tyofx Ah Ejbw Model: AB3-1000 Aseptik Maximum capacity: 3650 packages/hour Main motor: 2.2 kW Technical condition: used machine, untested, for technical inspection or overhaul

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Gedpfx Ahsv Aag De Eebw

Condition: excellent (used), Used GRP flat-bottom wine tanks with two chambers and approx. 2% slope to the outlet capacity approx. 81.000 ltr. Gbjdog T Tgxopfx Ah Eew diameter approx. 3.000 mm total height approx. 11.000 mm weight approx. 1,8 t Tank with upper vaulted bottom tank divided into 2 chambers, upper chamber 54.000 ltr., lower chamber 27.000 ltr. Equipment per chamber: 1 manhole 310 x 440 1 discharge connection flanged DN 65 1 vent connection flanged DN 50 1 flanged connection DN 50 for agitator 1 connection piece 3/8" for test cock otherwise according to sketch

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Gjdju Scr Sspfx Ah Eobw

Condition: used, Year of construction: 2019, Overview  This semi-automatic bag filler was manufactured in 2019 by Spain-based Cartobol. The machine is available for sale because the owner purchased a more advanced model to improve production. It is available promptly. Technical data  Capacity: Up to 600 bags/h (3L) 510 bags/h (5L) 390 bags/h (10L) 360 bags/h (15L) 300 bags/h (20L) Formats: 3L – 20L Bag-in-Box (individual and web bags) Dimensions: 0.73m x 0.93m x 1.85m Weight: 156 kg Pressure: Min. 6 Bars Voltage: 220V Intensity: 6 A Construction: Stainless steel frame and rollers, mobile on wheels Filling system: High-precision electromagnetic flowmeter Pump: Stainless steel centrifugal pump (8,000 L/h) Control: PLC with 7" touch screen Features: Automatic CIP cleaning system Optimized filling with load cells Fast format change Low air content inside bags Gbodpfx Ahjwi Txfs Ejw

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Gsdpfx Ahevptt Rs Ejbw