CNC Machine Centres For Routing, Drilling And Edgebanding.

BIESSE ROVER A 1332 ATS EDGE

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg Hsdpfx Aoy Ehrxebvonn - immediately available -

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - Joint milling unit FG 201 with 2 milling heads incl. diamond milling cutters 70 x 48 x 30 mm, Z 2 - Edge feeder 1903, single feed, automatic transport of coil and strip material - Gluing system Glu Jet GJ 301 with automatic glue height adjustment (touch-sensitive nozzle) - With magazine for glue cartridges - Printing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Trimming unit 1918, pneumatically pivoting 0-10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package incl. diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Pull blade unit 1929 MOT 2 Hnodjzdlwyopfx Abvsn - Chip collection box - Surface pull blade FK 701 - Deburring unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420