CNC ATC (Automatic Tool Changer)

Blue Elephant ELECNC 2130 ATC

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Cjdjxy Tmnepfx Anwogt

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm Cgodpfx Ansx Enpqswot - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm Cjdpscxxw Uefx Anwegt cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW weight of the machine ca.:1,2 t

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Cedsx D Drvepfx Anwsgt Extra Information Machine still under power

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Cgjdpfx Anjyx Hgzowet Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Codpexbzyrjfx Anwogt

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Distance between centres: 2000 mm Centre height: 230 mm Max. swing diameter: 455 mm Max. workpiece weight between centres: 800 kg Max. workpiece weight cantilever (incl. clamping device): 200 Nm X-axis traverse movement: Electromechanical drive with ball screw X-axis traverse movement: Cross feed speed 0.01 – 8,000 mm/min X-axis traverse movement: Setup via electronic handwheel or direction push button X-axis traverse movement: Measuring system with glass scale, internal resolution 0.0005 mm Z-axis table movement: Table feed speed 0.01 – 10,000 mm/min Workpiece spindle motor: 3.0 kW at 0–300 rpm Workpiece spindle taper: MK5 and KK5 Control: SIEMENS 840 D solution line Operation via dialog-guided interface Electronic handwheel available Grinding spindle motor: 11 kW Peripheral grinding wheel speed: 35 (50) m/s Standard grinding wheel: 600 x 80 x 203.2 mm Right face grinding wheel: 300 x 40 x 127 mm Internal grinding spindle by customer specification Tailstock taper: MK4 Tailstock operation: manual (hydraulic) Tailstock foot switch with quill stroke 40 mm and MK5 Card index / data management for workpiece data, up to 100 grinding wheels and 40 dressers Cylindricity error correction program-controlled for all dressable grinding wheels Dressing from the workpiece spindle headstock or from the tailstock Dressing allowances automatically compensated Optional integration of diamond form rolls or swivel dressers Various dressing strategies available in the control system Integrated CAD program (optional) Import of existing CAD data (optional) B-axis infinitely adjustable Fast and repeatable positioning Available grinding spindle configurations: Cgedpfxsynubwj Anwet External grinding wheel left External grinding wheel left + right face grinding wheel External grinding wheel left + external grinding wheel right External grinding wheel left + internal grinding spindle External grinding wheel left + right face grinding wheel + internal grinding spindle Production machine Can be equipped with loading portal and in-process measurement control Modular system / options: Manual or fully stepless automatic B-axis swiveling Number and configuration of grinding spindles (external and internal) Positionar (Z-length measuring sensor) Spark-out detection In-process measurement control Controlled C-axis (non-circular grinding) Hydrostatic guideway in X-axis (infeed axis) Swivel dresser, diamond form roll Servo-controlled tailstock with programmable holding force Network integration Data backup Remote maintenance Universal paper band filter Compact air purification unit Grinding cycles: X-plunge grinding Z-plunge grinding Z-longitudinal grinding Angular plunge grinding Multi-X-plunge grinding Contour grinding Angular oscillation Positionar cycle Non-circular machining Face grinding Z-peel grinding Auxiliary function The machine was commissioned at the end of 2012 Modernizations 2022 Repair grinding table: €255.40 Removal of tailstock: €1,174.50 Removal of tailstock, 2nd technician: €868.50 Installation of overhauled tailstock: €1,875.00 Installation + overhaul tailstock: €12,073.42 Total documented work volume: €16,246.82