Briquette press

Bogma Complete briquette line M75

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Codpfx Afjw Sy T Hetsgp Storage location: Nattheim

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Cgedpfx Aehclffjftsp Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Cjdpfjx Rn Udjx Aftsgp Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Complete hydraulics/control cabinets

Condition: good (used), Engine: 18.5 kW Cutting dimensions Cedpfxjxhb Uve Aftogp Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide Cgsdpfx Ajt R T Hcoftjp 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Cedpstk N Dksfx Aftsgp

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Cgsdpfx Aspfatpsftsp Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting Cgedoupwx Hopfx Aftjp

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Cjdpfxepl D Hxo Aftjgp

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm Cgedpjd Dy S Djfx Aftop