Rotary hammer

Bosch GSH 11 VC

Condition: good (used), Year of construction: 2017, operating hours: 8,760 h, Vehicle description TAKEUCHI TB 2150 tracked excavator Year 2017 acc. Counter 8.760 hours 85 KW 15.075 KG - hydr. quick coupler - Backhoe bucket - Slope bucket NEW - hydr. swivel arm - hydr. quick coupler - hydr. dozer blade - electr. tank pump Godpfxougf U Ae Aiheuh - ready for immediate use - 270cm width Sales price: 54.900,-- net also favorable delivery possible!

Condition: used, Year of construction: 2019, operating hours: 5,900 h, Tracked excavator CAT 308E2CR, year of manufacture 2019, approx. 5,900 operating hours. Very good condition. Gedpfx Aoxnvlcsihouh

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Gedjir Aihspfx Aihsuh Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor Gusdsxx A Ewepfx Aihjh - X- and Z-Axis with 6 roller supports for each axis!

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Gedod Swtaspfx Aihjuh Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 6,000 mm, warranty duration: 12 months, total width: 3,600 mm, total height: 700 mm, WORKBENCH FOR ASSEMBLING WOODEN FRAMES Direct sale from the manufacturer BOOSTON MACHINERY CARPENTER'S BENCH · JOINER'S BENCH · ASSEMBLY TABLE FOR PREFABRICATION Available lengths: 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12.0m; 13.5m; 15.0m DIMENSIONS - Working length: 6000mm (other lengths available) - Standard width: 3600mm - Working height: 700mm Guodpfx Aeyk H N Eoihsh - Workbench for self-assembly - shipped on a large pallet (cost saving for you) - Mounting holes for pneumatic clamps SD-01 - Option to expand with additional modules Additional options: - SD-01 pneumatic pressure cylinders - Option for pneumatically lifted rollers for horizontal transport (2 roller rows) - LS-01 base profile

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Guedpfx Aiexq Rrcjheh

Condition: excellent (used), mileage: 440,000 km, power: 460 kW (625.43 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 8x4, wheelbase: 5,250 mm, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9 kg, permissible axle load (axle 2): 8 kg, permissible axle load (axle 3): 13 kg, Year of construction: 2015, Equipment: AdBlue, Chassis number: WDB9634261L933624 Type: Trucks Year: 2015 Brand: Mercedes-Benz GVW: 41,000 kg GCW: 155,000 kg Emission standard: Euro 6 Mileage: 440,000 km Engine: EURO 6 / 15.6 L / 460 kW / 625 hp / 3000 Nm / Diesel / Inline 6 Transmission: Automatic Front axle: 9,000 kg / Steel suspension / Tires 385/65R22.5 Second axle: 8,000 kg / Air suspension / Tires 385/65R22.5 Third axle: 13,000 kg per axle / Steel suspension / Hub reduction / Tires 315/80R22.5 Fourth axle: 13,000 kg per axle / Steel suspension / Hub reduction / Tires 315/80R22.5 Wheelbase: 5,250 mm Cab: Large cab Cruise control 2 x bed Pull-out refrigerator Comfortable seats Storage boxes Radio CD player / Bluetooth Roof hatch Equipment: Jost JSK 38-C1 fifth wheel Fifth wheel on sliding frame Fuel tank AdBlue tank Orange warning lights Work lights Stainless steel tool boxes = Further information = General information Year of manufacture: 2015 Axle configuration Front axle: Tire size: 385/65R 22.5; Max. axle load: 9 kg; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/65R 22.5; Max. axle load: 8 kg; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Weights Payload: 155,000 kg GVW: 41,000 kg Gjdsxannaepfx Aihjuh Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840D Storage location: Halberstadt Gsdjzx Nx Djpfx Aihsuh Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, Gsdpfsivarysx Aihjuh which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction