Circular saw

Bottene R 550

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections. Guodpfx Aleyivr He Iog

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture Gujdomb U T Hopfx Al Iog

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm Guedpfx Alsxabg Aj Ijg turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: new, Year of construction: 2026, operating hours: 1 h, Production line for prefabrication of wall/floor/roof panels in wood construction - BOOSTON MACHINERY – This offer concerns a production line with a length of 9m (other lengths available from 3m to 15m). We are a manufacturer and offer complete production lines/equipment/butterfly tables/rotational tables/workstations for the prefabrication of wooden walls, designed for prefabricated house factories, modular construction, and manufacturers of wooden structures. The offered set enables the complete production process: from frame assembly, through wall cladding, panel rotation, to the transport of finished elements. Composition of the production line: 1. ER-00R/900 Workstation Assembly table for the construction of wooden frames, equipped with pneumatically lifting transport rollers. Parameters: * length: 9000 mm * overall width: 3600 mm * working height: 700 mm * 2 lines of pneumatically lifting rollers Purpose: * assembly of wall frames * positioning of structural elements * transport of prefabricated elements between workstations 2. SD-01 Clamping Cylinder Set A set of 6 clamping cylinders for the ER-00R workstation. Parameters: * quantity: 6 pcs * clamping force: 140 kg at a pressure of 8 bar Purpose: * clamping structural elements during assembly * stabilizing the prefabricated element during fastening and assembly 3. MT-01 Material Bridge Mobile bridge for the transport of panels and structural elements. Parameters: * load capacity: 800 kg * swiveling wheels 360° * manual movement between workstations Purpose: * transport of structural panels * transport of materials between workstations 4. ER-03H/900 Butterfly Table with Hydraulic Drive A workstation designed for rotating prefabricated walls and a separate workstation for assembling the frame and cladding (wing no. 1). - Wing No. 1 Parameters: * length: 9000 mm * width: 3600 mm * height: 700 mm * maximum load: 2500 kg * 3 lines of pneumatically lifting rollers Purpose: * assembly and transport of prefabricated elements * rotating walls - Wing No. 2 Parameters: * length: 9000 mm * width: 2300 mm * height: 700 mm Equipment: a set of roller pins for vertical transport of prefabricated elements onto transport trolleys 5. WP-01 Transport Trolley Set A set of 3 transport trolleys for picking up finished walls. Parameters: * adjustable support height * maximum load capacity of the set: 2500 kg Purpose: * picking up finished prefabricated elements * transport of walls in a vertical position ## Why BOOSTON MACHINERY? ✔ We are a machine manufacturer – you buy directly from the manufacturer, without intermediaries. ✔ Possibility to see the machines live in our production and storage hall. ✔ Products and components manufactured in Europe. ✔ 12 months manufacturer's warranty. Guedpfjzc Uwbox Al Ijg ✔ Simple, durable, and proven design for use in prefabrication plants. ✔ No complex automation and extensive electronics – reliable mechanics designed for many years of operation. ✔ Modular design that allows for later expansion of workstations. ## Expansion Options We manufacture tables and production lines in the following lengths: 3.0 m • 4.5 m • 6.0 m • 7.5 m • 9.0 m • 10.5 m • 12.0 m • 13.5 m • 15.0 m

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. Guedpfxsmb U T Rj Al Ieg High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting