Powder coating

Braun Himmel HA 5-2-9/500

Condition: used, Eldan Granulator HG129 Ksdpfet Uyvrsx Abvsdn

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Kdsdpfxowf Dpge Abven Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 Kdsdpjfktipjfx Abvsn pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Kodpfx Abownxupevsdn Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Laminated glass cutting line BOTTERO 545 VSX-46 + 100 BLC-J Kodpfxexlqzae Abvedn With low-e deletion Year of production: 2008 Maximum laminated glass cutting length: 4600 mm Maximum laminated glass thickness: 10 + 4.56 PVB + 10 mm Tilting loading table with belts 101 BLC-J is included Very good and clean condition Good working order, tested As is Available immediately

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Kdodpeyhc T Ijfx Abvsn Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Dimensions: L7000xW4030mm, weight +/-2500Kg Kdsdpfx Ajxrmpmebvsn

Condition: used, Year of construction: 2008, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: XR203724, number of blades: 36, rotor length: 2,000 mm, rotational speed (max.): 30 rpm, Single-shaft shredder UNTHA XR2000S, currently in operation in a three-shift system for alternative fuel production, available for sale from January 2026. Rotor length 2,000 mm, 36 rotor knives, hydraulic pusher, two 132 kW drive motors, two slip clutches, two gearboxes. Various spare parts are available in addition to the shredder: spare rotor, spare gearbox, spare motor, screen clamping bars, knives, etc. Kdedpfx Aowz Ex Uebvjn

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: LU0183, Roll forming line for solar profiles, both for trackers and fixed structures. High processing speed, with mechanical press and 10 CNC-controlled punching tools. Working speed up to 30 m/min. Working thickness from 0.8 to 3.0 mm and maximum strip width 450 mm. Ksdpfxswxfbws Abvedn

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Kjdpfxjfz Dubo Abvsdn - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.