Bridgeport VMC 1000/30

Bridgeport VMC 1000/30

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Fjdoz Iadyopfx Al Ujgh Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Fgodpfx Aljcm Elnj Ujh

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Fgsdpfxez Dkile Al Ueh

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40 Fedpfx Alozf Iqrs Uegh

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader Fgsdpfeycvaqjx Al Ueh - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm Fsdpfx Aevtrc Sel Uegh machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Fgodpofbml Njfx Al Ueh Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 Fgodpfx Ajxyadtol Ujh mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: used, Year of construction: 1995, turning diameter 150 mm Fsdjyi Hwtspfx Al Uegh turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Fgodpfxox D N Ipj Al Ujh Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning