Vertical machining center

BROTHER TC-S2A-O

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping Rodpfx Akjxab R Uoxot - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, functionality: fully functional, machine/vehicle number: div., For Sale: • 1x Kuris Pionier spreading machine including spreading table, automatic servo cutter, and bandknife. Set price: €6,750 (if disassembled by the buyer) • 1x Kuris Pionier spreading machine including spreading table and bandknife. Set price: €5,750 (if disassembled by the buyer) • 1x Bullmer spreading machine including spreading table and bandknife. Set price: €995 (if disassembled by the buyer) Several Kuris bandknives. Price: €750 each Redswpww Ejpfx Akxst 1x Bierrebi punching machine, including blade preparation table. Price: €4,950

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!! Rsdpet Iy Rvjfx Akxjt

Condition: good (used), Year of construction: 2008, BROTHER B00 CONTROL UNIT AXIS TRAVELS: TRAVELS: Z 415 X 550 Y 400 MM. DISTANCE BETWEEN TABLE AND SPINDLE NOSE 645 MM. RAPID TRAVELS XYZ 70 M/MIN. WORKING SPEED XYZ 1-20000 MM/MIN. REPEATABILITY ERROR +/- 0.003 MM. POSITIONING ERROR 0.005 ON 300 MM. N.2 TABLES WORKING AREA 600x425 MM. PERMITTED WEIGHT 200 KG. TABLE POSITION 3.4/180° SPINDLE POWER 16 KW SPEED 12000 RPM HSK TAPER A 40 RIGID TAPPING 8000 RPM MAX TOOL CHANGE TOOL MAGAZINE CAPACITY 40 PLACES TYPE OF SELECTION RANDOM TOOL CHANGE TIME 0.9 SEC. CHIP/CHIP TIME 2 SEC. OPTIONS Rjdpfju Spr Esx Akxot CHIP CONVEYOR SPINDLE OVERRIDE WORK AREA LAMP ROTARY JOINT COOLANT THROUGH SPINDLE N.2 LEHMAN IV AXIS TABLES COMPLETE WITH COUNTER-SUPPORT

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery (Germany) within a maximum of 7 days after order. General machine data: Machine type: Quick Vision APEX QV-T1404 Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control: Mitutoyo QV Remote Box Operating manual: Available Hardware and software equipment: PC/CPU: Brand new Monitor: Brand new Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measurement applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive range of accessories, including the Renishaw probe and calibration sphere, enables diverse measurement tasks. Rsdpfxew Hqx Rj Akxjt Kneissl Messtechnik GmbH is a trusted partner of Mitutoyo. Thanks to our close cooperation, we can respond individually to customer requirements and make specific adaptations to the Mitutoyo Quick Vision Apex.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (min.): 16,000 rpm, spindle motor power: 5 W, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, 4 units CNC Brother models S500X1/S700X1. Year of manufacture 2014 1 unit with 3 axes Rjdpsyap R Dofx Akxet 1 unit with 4 axes with hydraulic station without vapor filtration system 1 unit with 4 axes with hydraulic station with vapor filtration system

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. Rsdpfoin Etzox Akxet TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: excellent (used), Year of construction: 2008, For sale: CNC BROTHER in very good working condition. Redpfx Aeyapylekxet

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: C105253, 3-axis milling machine Rsdpfx Asx Eytzjkxjt 8 pneumatic clamps with auto, independ positioning 2x automatic toolmagazine for 2x 5 tools

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of cooling: air, laser wavelength: 1,064 nm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) Rjdpfx Akjwlc Stjxjt - Weight: approx. 120 kg