Thickness planer

Casolin Topstar 530

Condition: used, Year of construction: 1990, with hydraulic height and swivel adjustment Used, good to excellent condition Manufacturer: Panhans Model: 690 Year of manufacture: 1990 Machine no.: 705 GS-tested Upgraded motor 5.5 kW Cutting width approx. 1250 mm Cutting length approx. 2700 mm Max. cutting height 145 mm Swivel up to 45° Parallelogram guard Table extension approx. 1000 mm Hydraulic height adjustment Hydraulic swivel adjustment Extraction connection D 120/80 mm Required space approx. 3200 mm x 3500 mm x 1400 mm Weight approx. 1000 kg Dedpfswkvwtsx Ab Newc Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without guarantee or warranty.

Condition: used, Technical data: Max planing width: 630 mm Djdpjlp N Tyefx Ab Njwc Max planing height: 250 mm Knife shaft diameter: 120 mm Number of knives: 4 1 roll in the countertop Feed speed: 6-18m/min Electric lifting Power: 400V Motor power: 5.5 kW Overall dimensions: Length: 1300mm Width: 980mm Height: 1120mm

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Dwsdpfx Abjythclj Nsc Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: excellent (used), Altendorf F45 elmo panel saw 280 cm sliding table, cuts full-size panels Duplex mitre guide included Blade tilt and height electrically adjustable Right-hand fence motorized, adjustable up to 1340 mm 2-axis scorer, electrically adjustable 5.5 kW motor 4 cutting speeds adjustable via belt Djdpfx Abeyq E Iyo Nswc Max. blade diameter 350 mm Used machine in very good condition

Condition: used, SAC RS/530 Thicknesser width mm. 530 Dwodpfsyzfvgex Ab Nec

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position Dsdpfx Abew D T Dko Nowc T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Dedpexm R Uvefx Ab Newc Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Dwsdjwkvw Tepfx Ab Nsc Delivery in as-inspected condition, without any warranty or liability

Condition: used, Technical data: Max planing width: 520 mm Max planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 4 4 feed speeds Electric height adjustment Dwodpfxex Hgdcs Ab Njc Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1080 mm Height: 1080 mm

Condition: good (used), Year of construction: 1974, KAMRO thickness planer machine Model CONCORD DH5 Year of manufacture 1974 Dwsdowlfibepfx Ab Njc Motor 5.5 HP / 400 Volt 4-knife shaft (strip knives) Planing width 510 mm Planing height approx. 250 mm Feed speed 9 and 18 m/min. 2 table rollers Knife setting gauge Operating manual