Planers/Moulding Machines

CHAMBON PROFILMAX

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Ijdpfxsyqx T Aj Ahpoid Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: as good as new (ex-display), Hauslhof CTR800Hydraulik block bandsaw, demonstration machine, log diameter up to 830 mm, overall length 5800 mm, width 2300 mm, equipped with a hydraulic system for clamping, securing, rotating and lifting the log. Total engine output at 100% duty cycle: 10 kW. Options: CTR800H-Ver3, CTR800H-KSD, CTR800H-STH, CTR800H-STH-V, CTR-SSP, CTR-11, CTR-VOR, CTR-AMP, CTR-EGL, CTR-LG Automat, CTR-Pumpe-EA. Iodpfxevrvrns Ahpeid

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Ijdpfoxn Uptjx Ahpsid

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Isdpfeilhfcox Ahpeid

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Iedpfxsmiik Tj Ahpjid Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Iiedpjyhbt Hjfx Ahpsd Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Iiodpfx Ahevgvkaspsd

Condition: excellent (used), Year of construction: 1994, Nail making machine Iiedsuhxqmopfx Ahpod Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Iisdpfx Ahjwm Rtzsped Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Iodpfx Ahoi Apuhjpsid Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed