Center lathe

COLCHESTER Master VS 3250

Condition: new, Year of construction: 2026, 0350 mm Codpfx Abjxxb Azo Usra 196 mm 0650 mm 170 mm 42 mm 7,5 kW

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Crodpou St S Aefx Ab Usa Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: new, Year of construction: 2025, 0350 mm Credpowp Tpkofx Ab Uoa 196 mm 0650 mm 170 mm 42 mm 7,5 kW

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Credpfx Absmdn Dxo Uea

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Center distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Credpjctutmsfx Ab Uea Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Model: FA55VSD+ Crjdpfx Aex Dfmzeb Uoa Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Csdew Id U Hspfx Ab Uera Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Cedpfx Abjwbi Hpo Uora Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance Crodpfx Abothd Shj Uea - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg Codpfx Ajx D Nfueb Usra This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning