Dosing device

Colortronic UB 95

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Dedpfx Acov Nkz Especn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Dodsim R A Iepfx Acpscn LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm Dcsdpfx Aeyw Ud Sscpjn - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Dsdsxa D Hrjpfx Acpecn

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Dodswlp Hdopfx Acpocn Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Dcedpfxemdn Tre Acpsn Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, The used Coperion K-Tron K-ML-FB-130QC gravimetric dry solids feeder is a high-precision dosing system with a differential belt scale, manufactured in stainless steel. The unit combines continuous and particularly gentle product conveying via a dosing belt with precise gravimetric control, enabling uniform and controlled dosing of bulk materials Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Condition: Used Price: On demand -Hopper capacity: Storage hopper with an approximate capacity of 75 liters -Drive power: Main drive for the dosing belt and material feed powered by a 0.25 kW electric motor. Vertical agitator with an independent 0.25 kW drive -Agitator speed: Low operating speed of 5.6 rpm for particularly gentle product handling -Weighing technology: High-precision SFT (smart force transducer) load cell technology for accurate gravimetric control and precise dosing. -Material: Hopper and product-contact components manufactured from robust stainless steel -Dosing belt: Polyester fabric belt with a polyurethane coating, designed for easy cleaning. The support structure can be completely removed for cleaning and maintenance purposes -Dimensions: Length: 800 mm x Width: 700 mm x Height: 1.200 mm -Empty weight: Approx. 100 kg Dcodpfx Aoiv Ic Ejcpjn

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Djdpevmylzefx Acpjcn Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Year of construction: 2007, condition: good (used), machine/vehicle number: 12641207, Offer 23108 Technical data: Dedelzif Sspfx Acpocn - Welding current max. 550 A 60% ED - 420 A 100% ED - welding current adjustable 50 A - 550 A - 3 coarse levels + 12 fine levels - separate wire feed case with between package 4 m - 4 roller wire feed infinitely variable 0,5 - 24 m/min - 2 stroke + 4 stroke - regulation - water cooled hose package approx. 4 lfm - ground cable - pressure reducer - connection 400 V / 64 A - space requirement approx. W 550 x H 1310 x D 1050 mm - weight approx. 150 kg

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Dcedjhm Axgspfx Acpen Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed etc.