Band saw

Danobat CR 260 AF

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Rodpfx Aeph Uk Njg Ijp Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2006, Turning length 1500 mm Max. turning dia. 420 mm Spindle bore 105 mm Spindle speeds 3300 rpm Spindle speeds on live tools 3000 rpm Turret w/12 stations Hydraulic tail stock Control: Mazatrol 640 T Nexus Equipped with: Magazine bar feeder FMB SL 80 3 pcs. live tools Rodpfx Aex Nfwgeg Ijp Various tool holders

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Rjdpfx Agjqwyzfj Ijp Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Rjdpfxsyhbcue Ag Iop Technical data, information, and interim sale subject to change and errors!

Condition: excellent (used), Year of construction: 2017, DMG MORI DMC 1150 V Vertical Machining Center CNC: Siemens CELOS SMARTkey operating mode selector Year: 2017 Continuously programmable spindle speed: 20–24,000 rpm Rjdjyf Im Ijpfx Ag Ijp Spindle motor power: 24 kW Spindle hours: 2,200 hrs Continuously programmable feed rate for X, Y, Z axes up to 42,000 mm/min Rapid traverse X, Y, Z: 42 m/min X-axis travel: 1,150 mm Y-axis travel: 700 mm Z-axis travel: 550 mm Table size: 1,460 × 750 mm Maximum table load: 1,500 kg Overall dimensions: 6,185 × 5,421 × 2,910 mm Transport dimensions: 3,733 × 2,855 × 2,710 mm Machine weight: 9,200 kg Accessories: - 60-position tool magazine - Chip conveyor - Blum tool probe - Heidenhain workpiece probe - 4th-axis rotary table Nikken BZA CNC Z180 - Mist separator - Chiller unit - Through-spindle coolant - Set of 63 HSK tool holders - Wash gun - Oil mist extractor - Complete documentation

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg Rsdewl Dptopfx Ag Isp

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 Rsdpfsw Tnhbjx Ag Ijp - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in extra heavy-duty design, with a horizontally and parallel moving saw band, for cutting profiles, pipes, and solid materials of all grades, including extremely hard-to-machine materials (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made of solid polymer concrete construction, ensuring maximum running smoothness and extended saw band life. Guidance of the saw unit via two vertical square columns (dual-column guide) with hardened and ground guideways. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping via two horizontal frame clamping vises. Material feed through a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short remnants. Rsdpfx Agoupvrxe Iop Year of manufacture: 2004 Cutting range round: 400 mm Cutting range square: 400x400 mm Automatic material feed: 600 mm Multiple material feed: 99999 mm Cutting speed, stepless: 20-130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction, steplessly adjustable Material support height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Coolant system Full enclosure CNC control Idle time monitoring Band tracking control Side guide rollers Height measuring system Light barrier

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm Rodpfjvxwkfjx Ag Ijp total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Rodpfx Asrivlueg Iep Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories MARCELS MASCHINEN AG