MIG/MAG welding machine 400 A

EWM PHOENIX 400 TG

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t Rjdpfxeugawfj Abmsbt dimensions of the machine ca. m

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Rodpfx Aexddamobmebt

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Rbedpewudhusfx Abmjt Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2025, Working width 300 mm Working length 1100 mm Brush diameter 190 mm Brush rotation speed 1500 rpm Spindle diameter 40 mm Number of brushes 2 pcs.(metal + plastic) Max. speed of the feeding belt + smooth adjustment 0 - 10 m / min. Working height 940 mm + 50 mm Max. material height 300 mm Rsdogykauspfx Abmobt The diameter of the extraction port 2 x 120 mm Overall dimensions Length 1240 mm Height min / max 1350/1650 mm Width 950 mm Weight 435 kg Total power 4.65 kW Voltage 400V Massive casing, as a result, ensures high stability Working height 940 mm + 50 mm and max. 300 mm material height gives you the freedom to process large materials Two independent brushes (steel, plaster) with powerful motors, with precise manual adjustment allow you to achieve high product quality Two independent extractors ensure smoothness of the removed sawdust and dirt The machine is made of high-class materials, which guarantees reliability high-quality workpieces Stepless speed control of the conveyor carpet allows you to achieve smoothness and intended productivity Optimat's many years of production experience allows us to meet the highest standards machine tool for every budget

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Rbsdpfxjxc It Ij Abmjt Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: refurbished (used), Year of construction: 2007, operating hours: 11,200 h, machine/vehicle number: D300-373, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 350 mm, table width: 470 mm, table length: 400 mm, type of input current: three-phase, Equipment: documentation/manual, HSC300/3 (low hours) Complete overhaul of the entire system Technical data: Travel range XxYxZ 550x340x350 mm Rbsdpfer Hb Hpex Abmjt Clamping table/table to spindle nose 495 mm Overall dimensions WxDxH 2000x2350x2450 mm Rapid traverse 30 m/min Equipment: Color: light grey, partial respray in visible area CNC control Heidenhain iTNC530i electronic handwheel Direct measuring systems in all axes Milling spindle HVC140, milling power 10KW/13KW, HSK 40-E Spindle speed up to 42,000 rpm Tool diameters 0.02–16 mm Tool magazine for 40 tools HSC40-E Calibration arbor Calibration Blum laser for tool measurement Minimum quantity lubrication External cooling unit H.I.B Provision for dust extraction Dust extraction system Vario1 by Keller Transport On-site commissioning Training at our premises/on site 6 months warranty

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit. Rbjdpfx Aeivg Hgebmet

Condition: reconditioned (used), Year of construction: 1984, Machine is modernized in 2015. Drilling capacity max. 20 mm Tool taper 2 MK speed 355/710/1400/2800 rpm spindle stroke 100 mm spindle throat 210 mm headstock adjustment 250 mm max. distance spindle-table 445 mm Rbedpfxogqukfs Abmjt table surface 340X280 mm connected load 1,1 kW weight 0,165 t space requirement LxWxH 0,6 x 0,5 x 1,3 m

Condition: new, Year of construction: 2025, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Rsdpfx Abjcgmd Usmobt Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: used, machine/vehicle number: YV2JSW0C08A67xxxx, mileage: 448,556 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21171 Specifications – Car: 2008 model EU-approved until: 31.01.2027 Odometer reading: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Drivetrain: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total length of the platform with full extension: 7.442 m Hydraulic extension: 1.5 m Foldable side doors Nox sensor recently replaced Central lubrication Air conditioning / AC Radio Extra lights   Specifications – Crane: 2008 model 370.11/8S Certified until: 05/2026 All bearings in the crane joints have been recently replaced 8 hydraulic extensions 1 manual extension Rjdpfxsw Sc Rue Abmsbt Winch is disconnected (defective) 4 support leg Remote control Ready for delivery   Description: Volvo FM480 crane truck with 37 tm Effer crane (both 2008 model) for sale. The crane has had its bearings replaced in all joints and is ready for use. The winch is disconnected due to a fault. The car otherwise functions as it should according to the owner. Faults and defects may occur, and some additional costs must be expected. The crane truck is ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Model: FM480 kranbil m/2008, 370.11/8S Effer kran SE VIDEO Gearbox: Automatic