Milling machine

Deckel Maho M 2

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Bdedpfx Asvz Snkjgdef Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Bdedpfx Agex D Iuzsdef Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle Bdjdpfx Agoxz Ab Redof - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: new, functionality: fully functional, The V9 height gauge is designed for the most demanding users. Laboratories and workshops where measurement reliability is critical will appreciate its exceptional precision and 'Swiss Made' build quality. Metrological performance was at the core of the development of this height gauge. No compromises were made regarding precision and repeatability, which is why several design features—particularly the probe—differ from other models. The display, which is based on a fully tactile interface, offers a level of user-friendliness previously unseen in a vertical measuring instrument. The menus and displayed functions follow a rigorously consistent design philosophy, enabling high efficiency even in complex tasks such as programming, 2D mode, angle measurements, or statistical analysis of results. The V9 models are equipped with a revolutionary displacement handwheel, allowing the user to select between manual and motorized displacement mode. Measuring ranges: 400 to 1100 mm Exceptional precision Electronically adjustable measuring force Manual or motorized movement 2D, programming, statistics Comprehensive range of accessories All settings tool-free RS232 and USB interfaces Wireless data transmission (optional) Models V9: V9 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 21 Models V9: V9 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 24 Models V9: V9 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (μm): 1.2 + L(mm)/1000 Repeatability (μm): 0.4 (Ø: 1) Frontal squareness deviation (μm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Autonomy (h): 12 Bjdpfxjw R Nv Is Agdedf Interfaces: USB / RS232 Air bearing: Yes Weight (kg): 33

Condition: used, Year of construction: 1999, control Heidenhain Bjdpfx Ajw Syd Segdedf centre distance 1400 mm weight of the machine ca. 3,6 t Handwheel defective

Condition: good (used), Year of construction: 2010, Technical Specifications Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Bdsdpsxfly Defx Agdef Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Hydrokinetic vacuum washing system "RH500V" with water/detergents The cleaning process can be carried out by spraying, immersion and ultrasonic action. Usable dimensions of the basket: 450x300x200h mm Maximum load weight: 100kg • Washing tank (430 lt.) - electric heating • Rinsing tank (280 lt.) - electric heating • Basket rotation: fixed - complete 360° rotation - oscillation. • (controlled by PLC). • Motorized rotating washing sprayers • Hot air drying with dedicated vacuum pump. • Electronic level sensors. Bodpfx Aerlnfqjgdjdf • Ultrasound 1000w – 25khz • Double external translating loading pallet integrated in the fairing. • Matt “Matte” painting. • PLC Siemens S7-1200 - Touch screen Siemens KTP700. • Year of production 2025. New system used for tests in our showroom and exhibited at some trade fairs. Possibility of carrying out washing tests before purchasing. Available for immediate delivery from the parent company: Union S.p.a. – Sala Bolognese (BO), Italy.

Condition: used, Year of construction: 2022, operating hours: 10,014 h, functionality: fully functional, machine/vehicle number: 00340000910, turning length: 1,290 mm, turning diameter: 640 mm, spindle motor power: 46,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 95 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, workpiece weight (max.): 1,200 kg, feed force X-axis: 9,500 N, feed force Z-axis: 15,500 N, Equipment: documentation/manual, Technical data in the attachment. Bsdpfxjy Emx Rs Agdjdf

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Bsdpfszmxlpsx Agdjdf Basket dimensions: 480 x 320 x 300 mm

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9088000069A, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,700 kg, overall weight: 6,950 kg, For sale is a DMG MORI M2 Pro machining center, manufactured in 2023, in good condition. The machine was in operation for approximately 2.5 years, is fully functional, and can be inspected by appointment. The sale is due to a restructuring of our machine park. Technical data: Manufacturer: DMG MORI Model: M2 Pro Year of manufacture: 2023 Control system: Siemens SINUMERIK ONE Spindle speed: 12,000 rpm Travel distances (X/Y/Z): 1,100 / 550 / 510 mm Table size: 1,400 × 600 mm Maximum table load: 1,700 kg Machine weight: approx. 6,950 kg Condition: Good condition Bdsdpfx Agszh U Ngedof Fully functional Inspection possible by arrangement We will gladly provide the current operating hours upon request. If you are interested or have any questions, please do not hesitate to contact us.