Universal Milling Machine

DECKEL FP 4 M

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, Equipment: documentation/manual, Dear Sir or Madam, We are pleased to offer you a partially refurbished milling machine, type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly partially overhauled in our workshop, so it is in absolute top condition, both technically and visually, and is almost indistinguishable from a new machine in terms of geometry. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2,500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1,300 mm/min Drive power: 3.7 kW / 4.4 kW Travel paths X/Y/Z: 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1,600 kg Table version: Fixed angle table or rotary-swivel-tilt table Additional features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, machine levelling feet, technical documentation, and much more on request. Ljdox Irwdjpfx Agzeta Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can carry out a partial or complete overhaul of the selected machine - You are free to choose the paint colour of your machine - You can optionally order additional accessories such as tooling, etc. directly - On request, we can install further accessories such as safety equipment, etc. - We are happy to take care of shipping and/or machine installation

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch Lsdowc D Dxjpfx Agzsta - Safety device - CE mark

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Ltsdpfx Aexcldksgzsa Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as mistakes in the article description may occur and are subject to change.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Ltjdpfx Ajlfc U Dsgzoa Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), Mikron milling machine WF2/35 Ledpfxeum Rpyj Agzjta - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), Year of construction: 1987, Deckel FP4M tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Accessories: various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Lodpfx Agsxmi I Iozeta

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) Ljdsxctyaspfx Agzeta - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Lodpfx Ajiw Dlksgzota Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm Lsdpfx Aowffymsgzeta

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, Dear Sir or Madam, We hereby offer you a very well-maintained milling machine of the type Deckel FP4M (K) aktiv, featuring a rotary-tilt-swivel table and a 4-axis digital readout. With its extensive equipment, this model truly stands out among conventional machine tools. The machine has been thoroughly inspected in our workshop, is therefore in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Immediately available Machine No.: xxxx-xxxx Year of manufacture: xxxx Table version: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7kW / 4.4kW Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis digital readout (Heidenhain), 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, machine feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - You are free to choose the paint color of your selected machine - If desired, you can order additional accessories such as tools, etc. directly Lodpfx Agovvtlgjzota - On request, we can install other accessories such as safety devices - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Ltsdpfx Ajihig Iegzsa Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), functionality: fully functional, Travel X: 500 mm Travel Y: 400 mm Travel Z: 400 mm Spindle speed: 50 – 2500 rpm Drive power: 2.7 / 4.4 kW Tool holder: SK 40 with hydraulic clamp DIN 2080 Table type: Fixed table or swivelling table Table clamping surface: 650 x 380 mm Weight: 1600 kg Dimensions (including safety area): approx. 2500 x 2700 x 1950 mm Paint finish: RAL 6011 reseda green Digital readout: 3-axis HEIDENHAIN Accessories: Central lubrication, coolant tray, further accessories upon request Ljdpfxow I A D Tj Agzjta

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant!!! Technical Data: - Year of manufacture: 1984, Machine No. 2203-1429 - Fixed angle table (newly planed) - Speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on spindle carrier, adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill, 90 mm retractable - Drawbar system: M16 - Weight approx. 1500 kg Accessories and Equipment: - 3-axis Heidenhain digital readout - Coolant system - Swarf tray - Central lubrication Ltodpfx Aew N Sfvjgzja About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine is partly overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise work. Take the opportunity to view and test the machine under power on site.

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : Lsdpfxjhzg Ihs Agzeta 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Ltjdpfsu Tuk Hex Agzja Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.