Tool Room Milling Machine - Universal

DECKEL FP3L

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) >> Speed: 25 - 2500 rpm Fodezquq Nepfx Aa Repk >> Feed and rapid traverse in 3 axes >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant system About the machine: Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Condition: used, System: used piston diaphragm pump / pump Fsdpfx Ajdkdi Tja Repk Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: used, Year of construction: 1973, Tool milling machine DECKEL FP3, No. 1784, year of manufacture 1973, general overhaul by Huttelmaier (No. 20/6170, 25.09.1995, headstock overhauled in 2014), travels XYZ = 800 x 500 x 380 mm, spindle speeds 40 - 2,000 rpm, XYZ control HEIDENHAIN. Fpjdpezlpmbjfx Aa Rsk

Year of construction: 1975, condition: good (used), Includes FP3L milling machine head with adjustable angle table, vertical milling head, SK 40, S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by arrangement. Fpodpfoildwxex Aa Rsk

Year of construction: 2000, condition: good (used), Barberan laminating line Fjdoilqvrspfx Aa Ropk all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Fjdpfx Aeuclbzja Repk

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Fpsdpfx Aswg S Nksa Rek

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg Fsdpjg Ezarjfx Aa Repk *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: reconditioned (used), Year of construction: 1988, Universal milling machine Manufacturer: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with warranty Geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with clamping thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating manual - Drill grinding device with diamond disc Fodpsh Rv U Esfx Aa Repk -used, as is-

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min Fsdpfx Aswwwqhsa Rjpk power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: used, grinding length 1000 mm grinding width 300 mm workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm Fjdeu Dn Txopfx Aa Rspk grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm Fsdovn N Hdopfx Aa Rjpk >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options Fedpsh Sptnofx Aa Rjpk - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 37 mm, turning diameter: 360 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, Visue Newall 2 axes Capacity: 750x360 mm Spindle bore: 37 mm Variable spindle speed up to a maximum of 3000 rpm Fpedpfjyimzvjx Aa Rek