CNC turning and milling center

DMG MORI CLX 450 V3

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Bedpfx Asx Hqh Seglscu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 17,917 h, number of slots in tool magazine: 60, Equipment: rotational speed infinitely variable, Machine Description: - Universal 5-axis milling machine with linear drives in the X and Y axes, achieving 80 m/min traverse speed - Spindle and machine geometry in excellent condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current machine hours: Power ON: 58,985 h / Spindle ON: 17,917 h - Machine location: Lower Austria (near Vienna) Travel paths: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Work Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg CNC Control: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool interface: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Chip conveyor, scraper belt design Automatic Tool Changer: Tool interface: HSK63 Number of tool pockets: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: approx. 9,800 kg Bcjdpfx Ajya U Iboglou Additional Equipment and Accessories: › Heidenhain TS 649 probe › Heidenhain handwheel › Blum laser for tool measurement on the table › Chip flushing gun › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction › Operating manual / documentation › Dynamics package for linear drive, 80 m/min, incl. active cooler

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 406 x 508mm, Table 915 x 355mm, Spindle speed 0 - 12000rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 30 Station ATC, coolant Bjdpex Dk Evefx Aglecu

Year of construction: 2011, condition: ready for operation (used), A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available. Bcodpfxjup Ehij Aglju

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Bodpfxoyaix Ue Aglocu Additional equipment • Type: Side-Mount (SMTC)/ Capacity: 30+1/ Max Tool Diameter (full): 64 mm/ Max Tool Diameter (adjacent empty): 127 mm/ Max Tool Length: 279 mm /Max Tool Weight: 5.0 kg • Tool-to-Tool (avg): 1.80 s/ Chip-to-Chip (avg): 2.40 s • Included: HRT210 Machine Benefits Technical Machine Benefits • Torque: 122 nm at 2000 rpm • Drive system: inline direct-drive • Taper: bt40 / ct40 / hsk-a63 • Lubrication: air/oil injection/cooling: liquid-cooled • Max cutting feedrate: 21. 2 m/min / rapids on x, y, z-axis: 35. 6 m/min • Coolant tank capacity: 208 l / through-spindle coolant pressure: 21 bar / through-tool air blast: yes / chip auger: yes / chip tray filter kit: yes / window air blast: yes / coolant pump: multi-stage • Air consumption: 113 l/min at 6. 9 bar / minimum air pressure: 5. 5 bar / air hose connection: 3/8 in • Standard interface: ethernet and wifi / control memory: 1 gb / remote monitoring: haasconnect / high-speed machining: included / advanced tool management: included /media display (m130): included / power failure detection: included /safe run function: included / rigid tapping: included

Condition: used, Year of construction: 2011, turning diameter 0700 mm turning length 800 mm control 840D Siemens turret head 12 Bcedpfx Asx Sy U Eoglou swing over bed 380 mm spindle turning speed - stepless 10- 5000 rpm spindle bore 67 mm feed - longitudinal/cross 20000 mm/min rapid travel - longitudinal/face 30 m/min dimensions 5000 x 2800 x 2000 mm total power requirement 65 KVA weight of the machine ca. 7,5 t Machine has C-axe and 6 live tooling positions

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" Bjdpox Apkzefx Agljcu - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: used, Year of construction: 2016, x-travel 762 mm Bedoyb S Inopfx Agljcu y-travel 406 mm z-travel 508 mm control Haas

Condition: good (used), Year of construction: 2011, CNC Turning and Milling Center Machine type: DMG CTX Beta 800 V3 Control: Siemens 840D Year of manufacture: 2011 TECHNICAL DATA: Max. turning length: 800 mm Turning diameter: 380 mm Max. turning diameter over bed: 700 mm Spindle bore: 67 mm C-axis Main spindle: ISM 76 Spindle speed range: 0 - 5,000 rpm Drive power: 25 kW Number of turrets: 1 Tool positions: 12 Bcodoxvap Iopfx Aglou Driven tools: 6 Tailstock Equipment features: Chip conveyor

Condition: good (used), Technical Data – DECKEL MAHO DMU 70 eVo linear Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 70 eVo linear Control Unit: Heidenhain iTNC 530 Machine Concept: 5-axis universal machining center (simultaneous 5-axis machining possible) Axes / Travels: X / Y / Z: n/a (to be confirmed) A / B (swivel/rotary table): n/a (to be confirmed) Rapid traverses: n/a (to be confirmed) Table / Working Area: Table size: 700 × 500 mm Table load capacity: n/a (to be confirmed) Max. workpiece dimensions: n/a (to be confirmed) Max. workpiece weight: n/a (to be confirmed) Spindle: Main spindle: motor spindle Spindle speed: 18,000 rpm Power / torque: n/a (to be confirmed) Tool interface: HSK 63 Tool Changer / Magazine (ATC): Magazine capacity: 60 positions / 60 tools Change system: automatic Max. tool length / weight: n/a (to be confirmed) Measuring Technology: Tool measurement: laser tool measuring system (BLUM) Workpiece probe / probing system: BLUM touch probe (workpiece probe) Spindle / tool breakage control: n/a (to be confirmed) Coolant / Chip Management: Chip conveyor: available Chip management: swarf management system available Internal coolant supply / coolant system: available Tank volume / filtration: n/a (to be confirmed) Equipment / Options (as far as known): Front screen: replaced once Documentation: Service history / reports available Year of Manufacture / History / Condition: Year of manufacture: 2008 Installation / commissioning: 2009 Condition (current impression): Machine is dirty, cleaning recommended Optical condition: front screen already replaced Service / Maintenance: DMG service history available (digital from approx. 2020) Machine has been serviced regularly (according to available service reports / information) Very good spindle maintenance according to service documentation Geometry Data: Bjdpfxjyf Un Ee Aglocu Spindle alignment in X over a length of 400 mm is 0.008 mm (see Image01-Image02) Spindle alignment in Y over a length of 400 mm is 0.009 mm (see Image03-Image04) Flatness of X-guide over table length is 0.014 mm (see Image05-Image06) Flatness of Y-guide over table length is 0.002 mm (see Image07-Image08) Spindle runout at Z-400 mm is 0.008 mm (see video) In addition, the machine is Quickset-ready.