Machining center

DMG MORI M 1

Condition: excellent (used), Year of construction: 2021, Demonstration machine CNC control: SIEMENS 828D OP Axes Travel X-axis mm: 550 Travel Y-axis mm: 550 Travel Z-axis mm: 510 Rapid traverse m/min: 24 Work table: 850 x 650 mm Max. workpiece weight kg: 600 Spindle Gedpfx Aex Thrzsfkett Max. spindle speed rpm: 12,000 Spindle drive power kW: 13/9 (40/100% duty cycle) Spindle torque Nm: 83/57 (40/100% duty cycle) Cooling Coolant supply through spindle bar: 20 Tool system Tool holder: SK40 Number of tools in magazine: 24 Max. tool diameter mm: With adjacent pockets free mm: Ø130 With adjacent pockets occupied mm: Ø80 Max. tool length mm: 300 Max. tool weight kg: 8 Equipment Electronic handwheel Chip conveyor RENISHAW probe CTS (coolant through spindle) Total power requirement kVA: 20 Main machine: Dimensions/Weight Length mm: 3,070 Width mm: 2,670 Height mm: 2,840 Weight kg: 5,600

Condition: used, Year of construction: 2010, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,500 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 1,800 rpm, overall weight: 14,000 kg, - Heidenhain iTNC 530 control - 5 axes - Fixed table with integrated rotary table, diameter 750mm (500kg) - CTS (coolant through spindle) 40 bar - 60-tool changer (SK 40) - Milling head with B-axis - Chip conveyor - Spray gun - 3D Quick Set - BLUM laser measuring system Godpfx Aox Ni Ezofkjtt - Direct measuring system - 2 rotary clean windows Table clamping area: 2100 x 700 mm Spindle taper ISO: SK 40 Spindle drive: 35 / 25 kW Rapid traverse: 40 m/min Tool changer capacity: 60 positions Space requirement approx. 5.5 x 3.5 x 2.7 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Gsdpfox D Nigsx Afkett Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2021, operating hours: 5,560 h, functionality: fully functional, Equipment: chip conveyor, CNC controller: SIEMENS 828D OP Axes X-axis travel mm: 550 Y-axis travel mm: 550 Z-axis travel mm: 510 Rapid traverse m/min: 24 Worktable Table dimensions mm: 850x650 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 13/9 (40/100% ED) Spindle torque Nm: 83/57 (40/100% ED) Cooling Cooling through the Spindle Center bar: 20 Tool system Tool holder: SK40 Tool magazine slots: 24 Max. Tool Diameter With free neighboring places mm: ø130 With occupied neighboring places mm: ø80 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Mist collector Coolant gun RENISHAW Measuring probe Rated power kVA: 20 Gtjdou Tk Hdopfx Afkst Basic machine dimensions / weight Length mm: 3.070 Width mm: 2.670 Height mm: 2.840 Weight kg: 5.600

Condition: excellent (used), Year of construction: 1999, grinding length: 1,000 mm, Internal / External spindel Collet device Schaublin with inserts Steady rest 5 - 80 mm Steady rest 3 - 120 mm Coolant system Filtration system Speeds head 1500 / 1700 / 2200  Centre height: 175mm Grinding Ø: 350mm Grinding length: 1000mm Grinding stone dimensions:400 x 50 x 127mm Grinding stone speeds: 1500 / 1700 / 2200Rpm Table inclasement: 9° Tailstock: 4Mk Cooling system: Yes Filtration: Yes Length: 2860mm Width: 1680mm Gtedpfoxy I Tvjx Afkot Height: 1670mm Weight: 2500kg

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm Godpsw T Sc Nefx Afkjtt LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY-TYPE MILLING MACHINE Gjdpfx Afjvrv Suskjtt Control and Drives: Two HEIDENHAIN TNC 640 digital path controllers – one at the front of the machine and one at the rear in the cabin HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Chain-type tool changer with dual gripper, 60-tool capacity Dual hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power Gtsdper Ezfpjfx Afkjt motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 Gtodpfx Afomv H Dxeket EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: Gedpfsiw Dlksx Afkstt - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.