CNC lathe

DMG MORI NEF 400 V3

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Ppedjw Dfhuspfx Afijt

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 630 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: MATRIX, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools (atc magazine): 80 • High pressure through the spindle: 20 bar Extra Information Ppsdjyallkspfx Afijt Machine still under power Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 800 mm, turning diameter: 850 mm, spindle speed (max.): 1,760 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 465 mm, travel distance Z-axis: 800 mm, spindle motor power: 45 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,845 mm, total length: 3,450 mm, total width: 2,000 mm, torque: 2,577 Nm, overall weight: 9,500 kg, chuck outer diameter: 610 mm, spindle nose: A2-15, Equipment: documentation/manual, rotational speed infinitely variable, HYUNDAI WIA LV8500R – Unused since commissioning! Ppodoyw Sr Tspfx Afijt The machine was newly delivered and installed in October 2024. After installation, a geometry measurement cut was performed. The workpiece used for this still remains on the machine, which has otherwise not been used to this day! Machine equipment: - HYUNDAI WIA LV8500R – FANUC 0iPLUS with 15" touchscreen and FANUC SmartGuide i user interface including FANUC ManualGuide i - Tool breakage monitoring on all machine axes - Automatic work area door to allow for automation - Hinged belt chip conveyor - Reinforced drive power with 2-speed gearbox (45/37 kW – 2,577 Nm) - 24-inch (610 mm) 3-jaw power chuck with clamping jaws - RENISHAW automatic tool measurement - BMT-75 tool turret - 12 tool holders for fixed tools - LPS sensor for automatic adjustment of the clamping range - 20 bar coolant pressure - Coolant spray gun for the work area - Compressed air gun for part cleaning - Bed flushing to prevent chip nests - Air conditioning for the control cabinet

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm working area mm speed m/min Bar length mm total power requirement 25 kW weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus +3 / –5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off Pedpfxot Hwtre Afijpt device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS – Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Psdpfx Ajrxrklofijpt Pallet changer: 5 pallets

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Psdpjy Nxc Aofx Afispt Machine weight: 18,800 kg Condition: rarely used, like new

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Pjdpfxoyifm Do Afiopt Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Iceland, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM Ppodpfjx D Nd Dex Afiet

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Ppodeyghqvepfx Afijt

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Podpfx Aoyv E T Uofiopt Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *