5 axis universal machining center

DMG DMU 100 EVO

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing Rsdpfjzawmaex Aa Iow cooling device, handwheel only about 1.500 h

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Redpfxeydh Hlo Aa Ijw Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Rsdpfov Tk Exjx Aa Ijw Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Rjdpfsu Uic Tsx Aa Iew Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Rsdpfxotwliwe Aa Isw Sale only to commercial customers and with exclusion of any warranty!

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm Rodpfoihf R Ujx Aa Ijw FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm Rsdpfjxx A Dmex Aa Iow x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 Redpfx Aaoyzza Ie Isw 2. LAT160-HSK100 *

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Rodpfx Aoyvvt Soa Iew Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Rodpfx Asv Hg Euea Isw Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.