Milling machine

DMG DMU 100t

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Lhedpfx Aiex Sz Duskeg • Spindle hours: 24,186 • Condition note: Pneumatic cylinder of one of the two tool changers is defective and needs replacement Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Lhjdpfowm Rqaex Aikog Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 127300000073, total height: 4,500 mm, total length: 9,000 mm, total width: 6,500 mm, overall weight: 46,000 kg, DMG MORI DMU 210 P Universal Machining Center in heavy-duty duoBLOCK design for 5-axis positioning and simultaneous machining.The machine features a Heidenhain TNC 640 3D control system and a large working area of X 2,100 mm / Y 2,100 mm / Z 1,250 mm.The machining center is equipped with a continuously positioning universal milling head with a controlled B-axis and an integrated motor spindle. The swivel range extends from the horizontal position to a maximum of 250°. Additionally, the machine is equipped with an NC rotary table Ø 1,700 mm with direct path measurement system and 360° positioning. The permissible table load is approximately 8,000 kg.The SK50 motor spindle reaches speeds from 20 – 12,000 rpm with a power output of 52 kW / 42 kW and a torque of up to 430 Nm.Tool magazine as a wheel magazine with 63 tool positions and double gripper.Equipment includes, among others:IKZ high-pressure system 80 bar, frequency controlledBlow air through spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET expansion packageACC active chatter suppressionMPC Machine Protection ControlApplication Tuning Cycle ATCOil and emulsion mist separatorFull protective cabinChip conveyor4-color signal lampVirtual axis for TNC640RMS Relocation Machine SecurityMachine design for installation in a pit (depth approx. 780 mm).Feed rates up to 60,000 mm/min and rapid traverses up to 60 / 40 / 40 m/min.Machine from industrial use with extensive equipment for demanding applications in tool, mold, and mechanical engineering.Control ON: 47,888 h - Operating hours: 21,228 h 5-axis machining: Yes Travel Z-axis: 1250 - mm Travel X-axis: 2100 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 9000 x 6500 x 4500 mm Weight approx.: 46,000 kg Serial number: 12730000073 Lhedpfoyxmicjx Aikjg Travel Y-axis: 2100 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, Equipment: chip conveyor, rotational speed infinitely variable, DMU 75 monoBLOCK Year of manufacture: 2018 Control: Heidenhain TNC 640 Celos Axes: 5 simultaneous Main spindle Model: Speedmaster Speed: 20 – 20,000 rpm Tool changer Type: Chain magazine with double gripper Positions: 60 Travel distances X: 750 mm Y: 650 mm Ljdpfxoy St Swe Aikohg Z: 560 mm Equipment Oil mist extraction Rinsing gun Operating mode 4 Electronic handwheel IKZ 40 bar with belt and cartridge filter 3D measuring probe Chip conveyor

Condition: excellent (used), Surface of the base plate 880 x 700 mm Lsdpfxeuigzpo Aikehg Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Lhedpfodx D Tvsx Aikeg Weight 9.5 kg

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 4,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, number of axes: 5, This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details. • Control: Smooth G • Distance between spindles: 1000 + 440 mm Lhsdpfx Aisyxc N Ejkeg • Max machining diameter: 500 mm • Spindle attachment: A2-6 • Max bar capacity: 65 mm • Spindle bore: 76 mm • Tool magazine: 36 Capto Additional equipment • Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm Lodpfst Hww Dox Aikshg No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Lodpfsmftv Rox Aikjhg Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 845 mm, bar diameter (max.): 67 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 48, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. • CNC control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter spindle ISM 52 with C-axis (instead of tailstock) • Tool magazine: Chain magazine for 48 tools, HSK 63A • Coolant system: 8/20 bar, 600 l tank • Chuck rinsing for main and subspindle Lodpfxjx H U Ezs Aikohg • Coolant supply to counter spindle Additional equipment • Workholding: • Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Counter spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: Hinge type • Preparation for mist collector • Bar machining package Ø 67 mm • Tool measurement probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes