Cycle-controlled lathe

DMT CD 322

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A Pedpoy R Dh Tofx Ai Degr • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI Psdpoy Tzhpsfx Ai Djgr - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t Podpfspxrknjx Ai Dogr

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Max. spindle speed: 5,000 rpm Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Pgjdpfx Aozkr Skoi Dor Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2018, functionality: fully functional, Heidenhain Manual Plus 620 HSCI Touch control system Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Cross slide travel: 220 mm Distance between centers: 1500 mm Pjdpfx Aioza Uq Ns Dsgr Turning length: 1310 mm Drive power: 16 kW Spindle head: DIN 55027 - A6 Spindle bore: 64 mm Tailstock diameter: 60 mm Tailstock travel: 140 mm Taper: MK4 Tool turret: Sauter, 8 x DIN 69880, diameter 30 mm Multifix B mounted on the front of the slide.

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Pgodpsxn Av Uefx Ai Der

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t Pedpfjx U Encox Ai Djgr dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm Pgedpfsrc Ik Hjx Ai Dor -Weight: 555 kg

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 250 mm, quill diameter: 60 mm, quill travel distance: 140 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, machine/vehicle number: 2818.02, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Travel range X-axis: 250 mm Spindle head according to DIN 55027: A6 Spindle bore diameter: 64 mm Spindle diameter in the front bearing: 100 mm Speed range: 1–4,000 rpm Feed range, facing: 0.001–1,000 mm/rev Feed range, longitudinal and thread pitches: 0.001–2,000 mm/rev Rapid traverse, facing: 5 m/min Rapid traverse, longitudinal: 10 m/min Feed force, facing: 5,000 N Feed force, longitudinal: 7,000 N Tailstock Arbor diameter: 60 mm Arbor travel: 140 mm Taper: MK 4 MACHINE DETAILS Main spindle drive Power, digital AC motor at 40% duty cycle: 16 kW Power, digital AC motor at 60% duty cycle: 15 kW Power, digital AC motor at 100% duty cycle: 12 kW Gear stages: 2 Standard chuck size 1: 200 mm Standard chuck size 2: 250 mm Pgedpfx Ajzb Hf Uei Der Three-phase voltage: 400 V Frequency: 50 Hz Operating hours (according to meter): 4,521 h