Lathe

Ernault Somua C600

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone SA40 DECKEL Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Kedjxxpp Nopfx Am Uodl Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device Kedpfx Amolhwr Rs Uedl - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: new, Year of construction: 2025, 0583 mm 1710 mm Kjdpfxswp Tqno Am Ujdl 82 mm 436 mm 3000 U/min A1-8 DIN 55026 100 mm 235 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement Kjdpfxsx D H Aqj Am Ujdl

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Kjdpfx Amexz Rfkj Ujdl Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Ksdpfx Ajydk Hhom Ujdl Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: good (used), 3-axis visualization at 5µ resolution, fitted with protective enclosure Kdodpfxexxz Ano Am Uol Table surface: 1435 x 460 mm Travels: 1100 x 700 x 500 mm (LxWxH) Number of T-slots: 5 Spindle SA40 from 30 to 2066 rpm Spindle motor with brake for safety 2 emergency stop buttons Full spindle guarding Automatic lubrication 3 automatic movements and 3 rapid movements Rapid traverse speed: 2800 mm/min Power: 10 hp, 380 volts Lighting, coolant system with separate settling tank Front control panel with emergency stop button Machine in perfect condition Machine weight: 3500 kg

Condition: used, Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Kdsdpfx Amjxxlp Ss Ujl Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 300 mm, spindle bore: 51 mm, turning diameter: 575 mm, center width: 2,000 mm, spindle speed (max.): 1,600 rpm, overall weight: 2,200 kg, capacity 2000x575 mm Ksdpfsyar Apox Am Ujdl diameter 300 mm on cross-slide spindle bore 51 mm external electrical cabinet weight 2200 kg

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 37 mm, turning diameter: 360 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, Visue Newall 2 axes Capacity: 750x360 mm Spindle bore: 37 mm Kedpfx Ameyimzvs Uedl Variable spindle speed up to a maximum of 3000 rpm