Round bending machine

Faccin 4 HEL 3139

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Dedpfx Ajzbqquep Ijku Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm Dsdpfx Apst U R H Uo Isku pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C Dkjdpoifgu Usfx Ap Ieu synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round Djdpfxevvlbtj Ap Isku 7500mm length × 20mm-180mm square automatic loading 3000-6200 Laser head 2½D Selling due to purchase of 3D You can always come and see this machine running.

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg Dedpfx Aogvwgcjp Ieku load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) Dksdpfxoxabt Ao Ap Ieu With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 120 x 106 mm capacity 90 degrees: flat 102 x 197 mm 25,4 mm connected load frequency 230 V total power requirement 2,3 kW Djdpfx Apsupw Tke Isku weight of the machine ca. 28 Kg Dimensions (LxWxH) 0,6 x 0,35 x 0,45 m Machine for cutting pipes and profiles made of steel, light metal, Plastic, non-ferrous metal and composite materials.

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm Dedpfx Apef Ep Dij Ijku drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Dodpfx Apjd A Etye Isku Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable Dkedpfxedzwwno Ap Iju -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg